Eonon D3101M User manual

www.eonon.com

Option
System
Clock
2. Audio
3.Video Quality setup
4. Preference page
IR
FM

ACC+(RE D)
GND(BLA CK)
2.Open the door and connect the yellow“+ black - trigger wire with door
trigger on the car, and press the DOOR button on the unit. if lamp is on , please
connect blue“-” lamp trigger wire with the car door trigger.
” “ ”

BRIGHTNESS/CONTRAST/COLOUR/HUE
Select the one of BRIGHTNESS/CONTRAST/COLOUR/HUE and change the
picture condition as your taste,
1、Bring up the on-screen function menu by pressing
the MENU button on the unit or the TFT MENU button
on the remote control.
2、Select the desired menu by pressing the MENU
button on the unit or the TFT MENU button on the
remote control .
3、Change the figure of desired function to adjust
Contrast, Brightness, Color TEMP, etc.
1、Bring up the on-screen function menu by pressing the MENU button on
the unit or the TFT MENU button on the remote control.
2、Select the mode Source SEL,ZOOM by pressing
the menu button on the unit or TFT menu button on
the remote control.
3、 Control the desired mode by pressing the /
buttons on the unit or the / buttons on the
remote control as you want.
4、RESET.
OPTION
PICTURE Control
PICTURE Control

Listen to the audio portion of the disk through your IR headphone, You can
select A or B channel for IR headphone.
1、Bring up the on-screen function menu by pressing
the MENU button on the unit or the TFT MENU button
on the remote control.
2、Select “Audio Control”.
3、Press the / button on the unit or / button
on the remote control to select the A or B IR channel
at your choice,
Listening to the audio portion of the disk through your automotive speakers.
1、Bring up the on-screen function menu by pressing the
MENU button on the unit or the TFT MENU button on the
remote control.
2、Select the desired menu by pressing the menu button
on the unit or the TFT MENU button on the remote control.
3、Adjust the Radio frequency from 87.7MHZ ~ 89.1 MHZ
by pressing the / on the unit or the / buttons on
the remote control.
VOLUME

SYSTEM
1、Bring up the on-screen function menu by pressing the MENU button on
the unit or the TFT MENU button on the remote control.
2、Select the LANGUAGE ,S-COLOR by pressing
the menu button on the unit or the TFT menu button
on the remote control.
3、Control the desired OSD and color by pressing
the / buttons on the unit or the / buttons
on the remote control .
1、Bring up the on-screen function menu by pressing the MENU button on
the unit or the TFT MENU button on the remote control.
2、Select the last choice CLOCK to setting the
machine state as your prefer.
3、Than filled in a figure of the SLEEP,TIME,
OFF-TIME,ON-TIME by click your remote control
or pressing the / buttons on the
unit or the / buttons on the remote control .
CLOCK
SYSTEM

Captions

G.
2. AUDIO
3.VIDEO PAGE