Epson PowerLite Pro G6050W System manual

INSTALLATION HANDBOOK
Maintenance
Epson PowerLite Pro G6050W, G6150, G6450W,
G6550WU, G6750WU, G6800, G6900WU
1
Cleaning the Air Filter
You need to clean the projector's air filter in the following situations:
•The filter or vents get dusty.
•You see a message telling you to clean it.
•The projector's filter light flashes green.
1. Turn off the projector and unplug the power cord.
2. Slide the air filter cover latch and open the air filter cover.
3. Pull the air filter out of the projector.

INSTALLATION HANDBOOK
Maintenance
Epson PowerLite Pro G6050W, G6150, G6450W,
G6550WU, G6750WU, G6800, G6900WU
2
4. Tap each side of the air filter 4 to 5 times to shake off any excess dust.
Caution: Do not use excessive force when tapping the air filter, or it may crack and become
unusable. Do not rinse the air filter in water, or use any detergent or solvent to clean it. Do not use
canned air; the gases may leave a residue, or push dust and debris into the projector's optics or
other sensitive areas.
5. Vacuum the front of the air filter (the side with the tabs) to remove any remaining dust.
Note: If dust is difficult to remove or the air filter is damaged, replace the air filter.

INSTALLATION HANDBOOK
Maintenance
Epson PowerLite Pro G6050W, G6150, G6450W,
G6550WU, G6750WU, G6800, G6900WU
3
6. Place the air filter back in the projector as shown and push gently until it clicks into place.
7. Close the air filter cover.