Epson DM-D110 Series Use and care manual

DM-D110
Technical Reference
guide
EPSON English
410826900
Rev.A

Rev. A i
DM-D110 Technical Reference Guide
CAUTIONS
❏This document shall apply only to the product(s) identified herein.
❏No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any
means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of
Seiko Epson Corporation.
❏The contents of this document are subject to change without notice. Please contact us for the latest information.
❏While every precaution has been taken in the preparation of this document, Seiko Epson Corporation assumes no
responsibility for errors or omissions.
❏Neither is any liability assumed for damages resulting from the use of the information contained herein.
❏Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties
for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of: accident, misuse, or
abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.)
failure to strictly comply with Seiko Epson Corporation's operating and maintenance instructions.
❏Seiko Epson Corporation shall not be liable against any damages or problems arising from the use of any options
or any consumable products other than those designated as Original EPSON Products or EPSON Approved
Products by Seiko Epson Corporation.
TRADEMARKS
EPSON®and ESC/POS®are registered trademarks of Seiko Epson Corporation.
Microsoft®Windows®and Windows NT®are registered trademarks of Microsoft Corporation.
General Notice: Other product and company names used herein are for identification purposes only and may be
trademarks of their respective companies.
ESC/POSProprietary Command System
EPSON took the initiative by introducing ESC/POS, a proprietary POS printer command system including patented
commands and enabling versatile POS system construction with high scalability. Compatible with all types of EPSON
POS printers and displays, this proprietary control system also offers the flexibility to easily make future upgrades. Its
popularity is worldwide.
Revision Information
Revision Page Altered Items and Contents
Rev. A all pages Newly authorized

ii Rev. A
Related Software and Documents
Related software and documents
Software/document name Description
DM-D110 User’s Manual/ This provides basic handling procedures for the end user of the
printer
DM-D110 Technical Reference Guide This Manual
ESC/POS Application Programming Guide This provides descriptions in Acrobat format of the commands
used by each TM printer, along with sample programs and other
information about the printers
EPSON OPOS ADK This is a OCX driver
EPSON OPOS ADK Manual This provides information for anyone who is programming using
OPOS. This is included in the EPSON OPOS ADK
EPSON Advanced Printer Driver This is a Windows driver
EPSON Advanced Printer Driver Manual This provides information for anyone who is programming using
the APD (EPSON Advanced Printer Driver)
Guide for DM-D110 right side up printing This provides information on the DM-D110 printer for anyone who
is using the right side up printing mode.

Rev. A iii
DM-D110 Technical Reference Guide
Safety Precautions
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any
form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written
permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information
contained herein. While every precaution has been taken in the preparation of this book, Seiko Epson Corporation
assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use
of the information contained herein.
Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for
damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of
this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to
strictly comply with Seiko Epson Corporation’s operating and maintenance instructions.
Seiko Epson Corporation shall not be liable against any damages or problems arising from the use of any options or
any consumable products other than those designated as Original Epson Products or Epson Approved Products by
Seiko Epson Corporation.
EPSON and ESC/POS are registered trademarks of Seiko Epson Corporation in the U.S. and other countries.
NOTICE:
The contents of this manual are subject to change without notice.
Copyright © 2006 by Seiko Epson Corporation, Nagano, Japan.
EMC and Safety Standards Applied
EMC and Safety Standards Applied
Product Name: DM-D110/DM-D210
Model Name: M58DB/M59DB
The following standards are applied only to the display that is so labeled. (EMC is tested using the EPSON power
supplies.)
Europe: CE marking
Safety: EN 60950-1
North America: EMI: FCC/ICES-003 Class A
Safety: UL 90650-1/CSA C22.2
No. 60950-1
Japan: EMC: VCCI Class A
Oceania: EMC: AS/NZS CISPR22 Class B
WARNING
You are cautioned that changes or modifications not expressly approved by SEIKO EPSON Corporation could void
your authority to operate the equipment.
CE Marking
The display conforms to the following Directives and Norms:
Directive 89/336/EEC
EN 55022 Class B
EN 55024
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-11

iv Rev. A
FCC Compliance Statement For American Users
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be
required to correct the interference at his own expense.
FOR CANADIAN USERS
This Class A digital apparatus complies with Canadian ICES-003.
À l'intention des utilisateurs canadiens
Cet appareil numerique de la classe A est conforme a la norme NMB-003 du Canada.
GERAUSCHPEGEL
Gemas der Dritten Verordnung zum Geratesicherheitsgesetz (Maschinenlarminformations- Verordnung-3. GSGV) ist
der arbeitsplatzbezogene Gerausch-Emissionswert kleiner als 70 dB(A) (basierend auf ISO 7779).
Key to Symbols
The symbols in this manual are identified by their level of importance, as defined below. Read
the following carefully before handling the product.
WARNING:
Warnings must be followed carefully to avoid serious bodily injury.
CAUTION:
Cautions must be observed to avoid minor injury to yourself or damage to your
equipment.
Note:
Notes have important information and useful tips on the operation of your equipment.
Safety Precautions
This section presents important information to ensure safe and effective use of this product.
Please read this section carefully and store it in an accessible location.
WARNING:
❏ Shut down your equipment immediately if it produces smoke, a strange odor, or
unusual noise. Continued use may lead to fire. Immediately unplug the equipment
and contact your dealer or a Seiko Epson service center for advice.
❏ Never attempt to repair this product yourself. Improper repair work can be
dangerous.

Rev. A v
DM-D110 Technical Reference Guide
❏ Never disassemble or modify this product. Tampering with this product may result in
injury or fire.
❏ Be sure to use the specified power source. Connection to an improper power source
may cause fire.
❏ Do not allow foreign matter to fall into the equipment. Penetration by foreign
objects may lead to fire.
❏ If water or other liquid spills into this equipment, unplug the power cord immediately,
and then contact your dealer or a Seiko Epson service center for advice. Continued
usage may lead to fire.
CAUTION:
❏ Do not connect cables in ways other than those mentioned in this manual. Different
connections may cause equipment damage and burning.
❏ Be sure to set this equipment on a firm, stable, horizontal surface. The product may
break or cause injury if it falls.
❏ Do not use in locations subject to high humidity or dust levels. Excessive humidity and
dust may cause equipment damage or fire.
❏ Do not place heavy objects on top of this product. Never stand or lean on this
product. Equipment may fall or collapse, causing breakage and possible injury.
❏ Do not connect multiple extension struts. If the device topples over, there is a risk of
damage or injury.
❏ The horizontal rotating angle of the screen unit is limited by a stopper. Do not apply
excess force to rotate the screen unit past the limit set by the stopper. Doing so may
cause damage.
❏ When you are attaching and detaching the cable, always check that the power
switches of the customer display and the unit that it is connected to are turned off.
❏ Take care when handling the customer display not to drop or knock it because it has
a built-in fluorescent display tube.
❏ If you do not use this product for an extended period of time, always disconnect the
power cord for safety. If you move the product, ensure that the power cord is
disconnected and that all of the cables are disconnected before moving it.
❏ Do not use aerosol sprayers containing flammable gas inside or around this product.
Doing so may cause fire.

vi Rev. A
About This Manual
Aim of the Manual
This manual was created to provide information on the DM-D110 customer display for anyone
who is developing hardware, installations, or programs. Programmers will also want to consult
other documents.
Contents of the Manual
Chapter 1, “General Information.”General description of features plus
specifications.
Chapter 2, “Setup information.”Describes product DM-D110 setup.
Chapter 3, “DIP Switches.”Describes product DIP Switch settings.
Chapter 4, “Hardware.”Describes produc signal connections of the
interface and data flow.
Chapter 5, “Application Development
Information.”
Describes how to control the customer display.
Appendix A, “Character Code Tables.”Character Code Tables

Rev. A vii
DM-D110 Technical Reference Guide
Contents
Revision Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i
Related Software and Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii
EMC and Safety Standards Applied . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii
Key to Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv
About This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi
Aim of the Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi
Contents of the Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii
Chapter 1
Chapter 1Chapter 1
Chapter 1 General Information
General InformationGeneral Information
General Information
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Installation Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Connection Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Pass-through Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Stand-Alone Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
Y-type Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4
System Planning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4
Chapter 2
Chapter 2Chapter 2
Chapter 2 Setup information
Setup informationSetup information
Setup information
Cautions on Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
Usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Assembling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Attaching to the DM-D stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Attaching to the TM-H6000 Series/TM-U675 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11
Attaching to the TM-H5000 Series/TM-J8000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16
Attaching to the TM-U950 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-18
Attaching to Other TM Printers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-21
Chapter 3
Chapter 3Chapter 3
Chapter 3 DIP Switches
DIP SwitchesDIP Switches
DIP Switches
DIP Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
Transfer Speed Switching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
Setting the DIP switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Chapter 4
Chapter 4Chapter 4
Chapter 4 Hardware
HardwareHardware
Hardware
Interface Signal Connection Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
Data Flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
Pass-through Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
Standalone Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3
Y-type Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
DM-D110 Standard Model Interface Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
DM-D110 and PC Connection Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
DP-110 Printer Interface Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7
DP-110 Power Supply Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8

viii Rev. A
Chapter 5
Chapter 5Chapter 5
Chapter 5 Application Development Information
Application Development InformationApplication Development Information
Application Development Information
Introducing the Control Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
Features of EPSON OPOS ADK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
Features of Windows Driver (EPSON Advanced Printer Driver) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
Selecting Environment and Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3
Appendix A
Appendix AAppendix A
Appendix A Character Code Tables
Character Code TablesCharacter Code Tables
Character Code Tables

Rev. A General Information 1-1
DM-D110 Technical Reference Guide
Chapter 1
General Information
1.1 Features
The DM-D110 has the following features.
❏Large amounts of data can be displayed on the 20-column ×2-line dot matrix.
❏The display uses a fluorescent light, so it is easy to see at a wide angle in bright places and
dark places.*1 The fluorescent light has a long life.
❏The emitting light color is green and the brightness can be adjusted by an ESC/POS
command.*1
❏The DM-D110 is a compact size, so it is possible to place on a narrow counter.
DM-D110 165mm (width) x 69mm (height) x 50.5mm (depth)
DP-110 165mm (width) x 69mm (height) x 110mm (depth)
❏The display panel can be adjusted to the an easy to see position by moving it to the right and
left or up and down.
❏The DM-D110 can be installed in the EPSON HSS series and TM printers by using the option
parts.
❏The DM-D110 can be placed at a height that is easy to see by using the extension pole.
❏The communication speed can be set to 2400bps - 115200bps in accordance with the RS-232
interface.
❏The EPSON TM printer and the cash drawer can be connected and controlled by using one
interface. (In the case of the pass through connection and Y connection*2) The number of
interface connections of the host computer can be reduced.
❏OPPS and APD (Windows driver) are prepared with Windows. The display using any other
OS and the connecting equipment are prepared by ESC/POS commands.
❏There are two model colors of cool white and dark gray, and these colors are unified with
the EPSON HSS series and TM printers. It is possible to choose the one that fits to the
atmosphere of your shop.
*1 The initial setting is the brightest setting. It is adjusted by an ESC/POS command.
*2 A TM printer with a DM-D connector can be used. The cash drawer can be connected by using a TM
printer that has the DK connector.
*3 APD cannot be used in a net environment.

1-2 General Information Rev. A
1.2 Installation Example
The DM-D110 can be attached to the EPSON HSS series and TM printers, and it can be attached
to a DM-D stand.
1.3 Connection Example
1.3.1 Pass-through Connection
The pass through connection is the way of connecting the TM printer with the cash drawer by
passing through the stand of the customer display by using one serial port of the host personal
computer.
TM printer
PS-180
DM-D110 + DP-110
Host PC
Power cable
Cash Drawer

Rev. A General Information 1-3
DM-D110 Technical Reference Guide
1.3.2 Stand-Alone Connection
One serial port of the host personal computer is used as the exclusive port of the customer
display.
When [Serial Port3 Mode] of the SR-610 is set [DRW/DM-D], the customer display and the cash
drawer can be controlled by COM3.
1.3.3 Y-type Connection
Y-type Connection is the way of connecting the DM-D110 with the customer display and the
cash drawer by passing through the printer from one serial/USB port of the host personal
computer.
When [Serial Port3 Mode] of the SR-610 is set [TM/DM-D], the TM printer, the customer display
and the cash drawer can be controlled by COM3.
PS-180
DM-D110 + DP-110
TM printer
Power cable
Cash Drawer
Host PC
PS-180
AC-170
DM-D110 + DP-110
USB I/F
TM printer
Cash Drawer
Host PC
PS-180
DM-D110 + DP-502
Host PC TM printer

1-4 General Information Rev. A
1.4 System Requirements
❏A personal computer having a serial I/F
❏A TM printer having a DM-D connector
❏EPSON HSS series
1.5 System Planning
A customer display can display and be controlled using any of the following three methods:
1. ESC/POS commands
2. EPSON OPOS ADK
3. Windows printer driver (EPSON Advanced Printer Driver)
Refer to the "Application development information" in Chapter 5 from the characteristics of
each.

Rev. A Setup information 2-1
DM-D110 Technical Reference Guide
Chapter 2
Setup information
2.1 Cautions on Handling
When you use the DM-D110, be sure to note the following points:
❏Avoid locations that are subject to high temperature and humidity.
❏Avoid dirty and dusty locations.
❏Avoid locations that are unstable or are subject to high levels of vibration.
❏When connecting or disconnecting cables, make sure that the power switch of the DM-D110
and printers connected to the DM-D110 are turned off.
❏Do not drop the DM-D110 because you may damage the built-in vacuum fluorescent
display.
2.2 Usage
The DM-D110 can be used with the following equipment.
❏IR-320 series. You can attach the DM-D110 to the IM series using the “DM-D pole unit for
IR”(DP-504). (Refer to the IR-320 Technical Reference manual.)
❏IR-700 series. You can attach the DM-D110 to the IR-700 the DM-D support unit (DP-506) for IR-
700 series. (Refer to the IR-700 Technical Reference guide.)
❏SR-610 series. You can attach the DM-D110 to SR-610 series. You can attach the DM-D110 to
the SR-610 using the DM-D support unit (DP-504) for SR-610 series. (Refer to the SR-610 Technical
Reference guide.)
❏DM-D stand. You can attach the DM-D110 to the DM-D stand directly using the “DM-D
stand unit for DM Customer Display”(DP-110-1x1). When using the DM-D stand, an
optional power supply unit (PS-180) is required. Also, if you want to extend the height of the
DM-D110, an optional extension support unit (DP-105) is required. (See page 2-2.)
❏TM-H6000 series/TM-U675. You can attach the DM-D110 to TM-H6000II/TM-U675 printers
using the “DM-D pole unit for TM printers (Type A)”(DP-502). (See page 2-11.)
❏TM-H5000 series/TM-J8000 printers. You can attach the DM-D110 to TM-H5000II/TM-
J8000 printers using the “DM-D pole unit for TM printers (Type B)”(DP-503). (See page 2-
16.)
❏TM-U950. You can attach the DM-D110 to the TM-U950 printers using the “DM-D pole unit
for TM printers (Type A)”(DP-502). (See page 2-18.)
❏Other TM printers. You can attach the DM-D110 using the “DM-D pole unit for TM printers
(Type A)”(DP-502) and Velcro tapes or screws. (See page 2-21.)

2-2 Setup information Rev. A
2.3 Accessories
2.3 Accessories2.3 Accessories
2.3 Accessories
2.4 Assembling
Attach the DM-D110 by usingb the following procedure.
2.4.1 Attaching to the DM-D stand
The DM-D110 can be attached directly to the DM-D stand using the “DM-D stand unit for DM
Customer Display”(DP-110). The DM-D110 with the DM-D stand can be connected to a TM
printer, or be used as a standalone product.
The function differs with the DM-D stand types.
•DP-110-101/DP-110-111 : This is connected to the personal computer and the TM
printer with the pass-through connection.
•DP-110-102/DP-110-112 : This is connected to the TM printer with the Y-type
connection and this is set on the desk for the DM-D110 and
the DP-110-1x2.
DP-110-1x1 DP-110-1x2 DP-502 DP-503 DP-504 DP-505
extensioncableforpowersupply1- ----
RS-232C connector installation screw
(mm type)
4- ----
fixing topping screw (M3 X 10) - - 2 3 - -
fixingscrew(M3X5) --2---
fixing screws for wood position
(M3.1 X 10)
--4--5
rubber feet (square) - - 4 - - -
velcro tapes set - - 1 - - 1
rubber feet (big) - - 2 - - -
fixingscrew(M3X8) - - --3-
extensionsupport --1---
rubber feet (small) - - 4 - - -
fixingplate,A --1---
fixing screws for fixing plate - - 4 - - -
stopper --1---
fixing screw for stopper - - 1 - - -
DM-Danglefixingscrew --1---
fixing plate ,B - - 1 - - -

Rev. A Setup information 2-3
DM-D110 Technical Reference Guide
2.4.1.1 Required items
The following items are used to attach the DM-D110 to the DM-D stand. The power supply unit
(PS-180) and the extension support (DP-105) are options. For details, ask your dealer.
DM-D stand
extension cable for
power supply
RS-232C connector installation screw
(mm type)
<extension support (DP-105)
>
<DM-D stand unit for DM Customer Display (DP-110)
>
power supply unit
(PS-180)
extension support
Velcro tapes
interface connector
base plate

2-4 Setup information Rev. A
2.4.1.2 Connectors for the DP-110-1x1
The connectors for the DP-110-1x1 are as follows:
Note:
Inch-type hexagonal lock screws are installed in the RS-232 connector. If millimeter-type lock screws are
needed, use the millimeter-type lock screws of the accessory.
2.4.1.3 Jumper setting
Set the jumpers on the DM-D stand as follows:
The jumpers are located as shown below:
JP1 JP2 Perpose
1-2 1-2 For connecting both the TM printer and the DM-D stand.
(Default setting)
2-3 2-3 For using the DM-D stand a standalone.
(TM printer is not connected.)
printer connector
extension cable connector
display connector
power supply unit connector
computer connector
millimeter-type
inch-type
notch (one or more lines)
RS-232C connector
installation screw
JP1
JP2

Rev. A Setup information 2-5
DM-D110 Technical Reference Guide
2.4.1.4 Precautions on using the power supply unit
To avoid damage to the DM-D110 and the power supply unit, make sure to note the following
points.
❏Use the optional Seiko Epson products, PS-180 as the power supply.
❏Never connect the DC cable to the power supply unit when the power supply unit is
connected.
❏Unplug the DC cable by holding the connector part. If you pull the cable to unplug it, it may
be damaged.
2.4.1.5 Assembling steps
1. Pass the cable for the DM-D110 through the DM-D stand.
When extending the length of the DM-D stand, attach the extension support (DP-105) to the
DM-D stand.
When using the
extension support
(DP-105)

2-6 Setup information Rev. A
2. Insert the tab on the DM-D110 (or the extension support) into the hole on the DM-D stand
until you feel it click.
3. When connecting to a TM printer with a Y-type connection, skip to step 13. Connect the
cable for the DM-D110 to the display connector on the DM-D stand until you feel it click.