Ergotron ERGITD-013 User manual

1 of 13
777-24-059-M-00 rev. A • 02/17
0JY3D8A00
Custom Solution for Dell™by Ergotron
Dell Compact Charging Cart -  Devices
ENGLISH
For service, visit www.ergotron.com/Dell
or www.dell.com/support
The Dell Compact Charging Carttransports, secures, and
charges  Notebooks, Chromebooks, Ultrabooks, or tablets.
Intended for Institutional Use.
Model:
ERGITD-013

2 of 13
777-24-059-M-00 rev. A • 02/17















x
x
x
x
4mm
ENGLISH
Features & Specifications
Locking Front Doors
Locking Back Door
Front and Back Locking Door
Latch with Padlock Bracket
Two External Power Receptacles
Power Switch with
Indicator Light
Cord Wrap with Detachable
Power Cord
Ergonomic Handle
Two Directionally Locking
Casters (Blue Tab)
Two Locking Casters
 Removable Device Dividers with
Cable Channels
 Shelves with Height Adjustment
 Center Panel with Power Outlets
and Cord pass through openings
 Power Adapter Storage Trays
 Top Shelf with /” high lip
 Corner Bumpers
Ship with Items List:
Shelf labels (-)

3 of 13
777-24-059-M-00 rev. A • 02/17
1
2
a
a
b
b
c
c
d
d
ENGLISH
Set-Up and Go
Unlock and open front doors.
Open back door.
a. Unlock with Key.
b. Lift handle up.
c. Rotate handle clockwise.
d. Open door.
a. Unlock with Key.
b. Lift handle up.
c. Rotate handle clockwise.
d. Open doors.

4 of 13
777-24-059-M-00 rev. A • 02/17
3
4
a
b
ab
ENGLISH
Set-Up and Go
a. Route device cables into dividers.
b. Route adapters through cart to back of cart and plug into outlets.
a. Insert device into divider.
b. Plug power cable into device.
Store adapters and bundled cables on adapter shelves.

5 of 13
777-24-059-M-00 rev. A • 02/17
5
1
ab
12
2
ENGLISH
Set-Up and Go
How to Remove Dividers
How to Replace Dividers
a. Plug power cord into base of cart and into wall outlet.
b. Push power button to turn on power.

6 of 13
777-24-059-M-00 rev. A • 02/17
1
2
3
4
5
4mm
ENGLISH
How to Adjust Shelf Height

7 of 13
777-24-059-M-00 rev. A • 02/17
-29 °C
-20 °F
60 °C
140 °F
Relative
Humidity
Range
5-95% rH
0 °C
32 °F
30 °C
86 °F
10-90% rH
Relative
Humidity
Range
ENGLISH
Service and Warranty
NOTE: When contacting customer service reference the serial
number located above the external cable management bay.
For service, visit www.ergotron.com/Dell
or www.dell.com/support
Serial Number is
required for warranty
entitlement.
Power System
V~, A Hz
Physical Dimensions
Height:  cm (.-inches)
Length:  cm (.-inches)
Width:  cm (-inches)
Weight (without Mobile Devices)  kg ( lb)
Weight Capacity:
Top Surface . kg ( lb)
Shelves (Top, Middle, Bottom) ea. . kg ( lb)
Adapter Shelves (ea.) . kg ( lb)
Tip Test/Angle  degrees
Generally compatible with most " display devices and
some " devices.
Environmental
Temperature range:
Operating ° to °C (° to °F)
Storage -° to °C (-° to °F)
Relative humidity (maximum):
Operating %–% (non condensing)
Storage %–% (non condensing)
Altitude (maximum):  m (, ft)
Specifications
Operating Storage
Elevated Operating Ambient - Consideration should be given to installing the cart in an
environment compatible with the maximum ambient temperature Tma of  degree C.

8 of 13
777-24-059-M-00 rev. A • 02/17
ENGLISH
Product and Safety Alerts
Troubleshooting Guide
These symbols alert users of a safety
condition that demands attention. All users
should be able to recognize and understand
the significance of the following Safety
Hazards if encountered on the product or
within the documentation. Children who
are not able to recognize and respond
appropriately to Safety Alerts should not use
this product without adult supervision!
The white ON/OFF switch is flashing. What does that mean?
There is an over-current condition that cannot be resolved. Power has been removed to the devices. An over-current condition
could be a defective device installed or possibly something plugged into external auxiliary outlet causing too much current. To
correct, remove source of over-current condition, then unplug from wall and then plug back in, or push power switch OFF then
back ON to reset. If you cannot determine which device is causing the over-current condition, unplug all devices, turn cart on
and plug in one device at a time to determine which device is causing the over-current condition.
When I plug in the unit it trips the circuit breaker in my building. Help!
The carts are designed to run on a  amp circuit. If you have other items plugged into the same circuit you may be
overloading it. Have a qualified electrician check that adequate power is available.
How can I make the cart easier to steer?
This cart has two directional lock casters to make the cart easier to steer. How? Directional lock casters don’t swivel - they lock
the direction of the casters so they move in a straight line. Press the blue tabs of these casters (located under the handle) when
you need to move the cart more than a few feet. When you need to maneuver into tight spaces, release the tabs so the casters
swivel.
Symbol Signal Word Level of Hazard
NOTE A NOTE indicates important information that helps you
make better use of this product.
CAUTION
A CAUTION indicates either potential damage to
hardware or loss of data and tells you how to avoid the
problem.
WARNING A WARNING indicates either potential for property dam-
age, personal injury, or death.
ELECTRICAL
An Electrical indicates an impending electrical hazard
which, if not avoided, may result in personal injury, re
and/or death.
Hazard Symbols Review

9 of 13
777-24-059-M-00 rev. A • 02/17
ENGLISH
CAUTION: Observe all the safety precautions related
to the operation and maintenance included in this reference
guide! Failure to follow the safety precautions may result in
injury or damage to equipment.
CAUTION: No TV/Monitor to be used on top of cart.
CAUTION: There is no on/o switch on this equipment;
the only power disconnect is the AC power cable.
Therefore, the socket outlet should be easily accessible and
should be installed near the equipment.
WARNING – Death or serious injury may occur when
children climb on audio and/or video equipment furniture. A
remote control or toys placed on the furnishing may encourage
a child to climb on the furnishing and as a result the furnishing
may tip over on to the child.
WARNING – Relocating audio and/or video equipment
to furniture not specifically designed to support audio and/or
video equipment may result in death or serious injury due to the
furnishing collapsing or over turning onto a child.
There are specific risks associated with the use of equipment having power cables. You must be aware of, and avoid these risks
when the Cart is located in close proximity to children.
WARNING: Failure to observe the following Electrical Safety notices can result in fire or death by electric shock.
Electrical: Electrical cables can be hazardous. Misuse can result in fire or death by electrical shock.
• Inspect power cables thoroughly before each use.
• Do not use cables that are damaged.
• Insert the plug completely into the outlet.
• Grasp the plug to remove from the outlet.
• Do not unplug by pulling on the cable.
• Do not use excessive force to make connections.
• Use only Dell power adapters that come with Dell systems with this cart.
• Do not plug the cable into an extension cable.
• Do not remove, bend or modify any metal prongs or pins of cable.
• Do not drive, drag or place objects over the cable.
• Do not walk on the cable.
• Avoid overheating. Uncoil the cable and do not cover it with any material.
• Do not run cable through doorways, holes in ceilings, walls or floors.
Electrical: Keep the Cart away from water.
• Do not use it when wet.
• Do not place the Cart in close proximity to flammable liquids or gases.
Equipment Electrical Safety
DANGER!
Risk of Electric Shock
DANGER! Electrical cables can be hazardous.
Misuse can result in fire or death by electrical shock.

10 of 13
777-24-059-M-00 rev. A • 02/17
ENGLISH
WARNING: Failure to observe the following safety notices may result in serious personal injury or equipment damage.
Inspect for damage, dirt and debris on a regular basis. All paint and plastic components used in the Cart will withstand cleaning
by most commonly used, diluted, non-abrasive solutions such as quaternary ammonia compounds, ammonia enzyme cleaners,
bleach, or alcohol solutions. It is recommended that any cleaning solution be tested on a small, inconspicuous area to ensure it
does not harm the surface of the Cart.
• Marks from permanent marker, dry-erase marker, and pens can be removed with % isopropyl alcohol and a soft cloth.
• Iodine stains can be removed with commonly used cleaners and a soft cloth.
• Do not use steel wool or other abrasive materials that may damage the surface finish.
Electrical: To avoid risk of electric shock, do not expose electrical components to water, cleaning solutions or other
potentially corrosive liquids or substances.
Electrical: Do not immerse Cart or Cart components in liquid or allow liquids to flow into the Cart. Wipe all cleaners o
surface immediately using a damp cloth. Dry the surface thoroughly after cleaning.
Electrical: Do not use flammable cleaners on Cart surfaces.
CAUTION: Adjustment, Service, Replacement - DO NOT attempt to adjust, service or replace any part of the Cart unless
directed to do so through Ergotron-approved documentation (i.e. installation instructions). Only Ergotron, Inc. or an Ergotron-
certified entity may adjust, service or replace Cart components. If any component on the Cart is missing or damaged, the Cart
must not be used. Contact Ergotron immediately to request a replacement part.
CAUTION: Casters - Check casters periodically to make sure they are clean and free of debris that would prevent smooth
travel. Avoid moving Cart across uneven, dirty, or damaged surfaces.
CAUTION: Customer Equipment- Make sure equipment is balanced and installed securely to Cart. Contact Ergotron for
information about moving Cart components.
CAUTION: Changes or Modifications not expressly approved by Ergotron could void the user’s authority to operate the
equipment.
Cleaning and Maintenance