Etac Molift Mover 180 User manual

Molift Mover 180, 205, and 300
Mover 180
Gross weight 217kg / 478lbs
SWL 182kg / 400lbs
14.4V DC, IP24
Duty cycle 10%
60601-1
(01)XXXXXXXXXXXXXX(11)XXXXXX(21)XXXXXX
XXXXXXYYYY-MM-DD
Etac A/S
Parallelvej 3
DK-8751 Gedved
www.etac.com
ABCDEFGHIJ
Product label, Mover 180 ID label, Mover 180
Serial no. Article no. Production dateSWL value
Lifting arm
Push
handles
Motor /
actuator
Emergency
stop
Hexagon
socket screw
Legs
Electric
emergency
lowering
Chassis
Sling bar
Battery
Lifting
column
Manual
emergency
lowering
Hand
control
Wheel / castor
(Rear with brake)
Hexagon
socket screw
PI06101 Rev. D 2022-06-15
Periodic inspection checklist (EN)
In accordance with ISO:10535

2
Molift Mover 180, 205, and 300 | PI06101 Rev. D | www.etac.com
Mover 205
Gross weight 244kg / 538lbs
SWL 205kg / 452lbs
26.4V DC, IP24
Duty cycle 10%
60601-1
(01)XXXXXXXXXXXXXX(11)XXXXXX(21)XXXXXX
XXXXXXYYYY-MM-DD
Etac A/S
Parallelvej 3
DK-8751 Gedved
www.etac.com
ABCDEFGHIJ
Product label, Mover 205 ID label, Mover 205
Serial no. Article no. Production dateSWL value
Lifting arm
Push handles
Motor /
actuator
Emergency
stop
Legs
Electric
emergency
lowering
Chassis
Sling bar
Battery
Lifting
column
Manual
emergency
lowering
Hand control
Wheel / castor
(rear with brake)
Locking handle

3
Molift Mover 180, 205, and 300 | PI06101 Rev. D | www.etac.com
Mover 300
Gross weight 340kg / 750lbs
SWL 300kg / 661lbs
26.4V DC, IP24
Duty cycle 10%
60601-1
(01)XXXXXXXXXXXXXX(11)XXXXXX(21)XXXXXX
XXXXXXYYYY-MM-DD
Etac A/S
Parallelvej 3
DK-8751 Gedved
www.etac.com
ABCDEFGHIJ
Product label, Mover 300 ID label, Mover 300
Serial no. Article no. Production dateSWL value
Lifting arm
Push
handles
Motor /
actuator
Emergency
stop
Locking
handle
Legs
Electric
emergency
lowering
Chassis
Sling bar
Battery
Lifting
column
Manual
emergency
lowering
Hand
control
Wheel / castor
(Rear with brake)

4
Molift Mover 180, 205, and 300 | PI06101 Rev. D | www.etac.com
A copy of this document is available for download
at www.etac.com.
Scan QR code on product label for accessing
product home page. The user manual can be found
in the document section.
Article no. (see ID label):
........................................................................................
Serial no. (see ID label):
........................................................................................
Production Year:
........................................................................................
Owner:
........................................................................................
Sling shall be inspected separately and is not
included in this inspection.
Specify model:
Mover 180
Mover 205
Mover 300
Situation of use
Home
Hospital
Nursing home
Other
The periodic inspection is to be
performed by a person who is suit-
able and properly qualied and well
acquainted with the design, use and
care of the hoist
The hoist’s software Molift Service
tool provides option to enter date of
PI and name of inspector along with
additional information.
Molift recommends adding all
observations / remarks concerning
the hoist in the Molift Service tool for
complete history log of the hoist
Service light indicator
Note colour of service light indicator:
Status Service light Mode
(No light) Power saving (Stand by)
Green Ready for use
Yellow Order service
Red Perform service
Red (and
sound when
activated)
Perform service
immediately
Visual examination
Visual examination of load bearing
structure to make sure there is no
damage, cracks, frays or deformation.
All checkpoints must be checked to
approve hoist for further use
OK Not OK
Lifting column
Lifting arm
Legs
Product label
Plastic covers
Hand control
Actuator
Wheels / castors
Brakes on wheels / castors
Charger
Cables
Battery
Other electronics
Sling bar, incl. padding
Leg spreading mechanism
No corrosion
Weldings
Instruction for use / user
manual is present / available

5
Molift Mover 180, 205, and 300 | PI06101 Rev. D | www.etac.com
Functional examination
Test FUNCTION and inspect for wear
and damage.
All checkpoints must be checked to
approve hoist for further use
OK Not OK
Wheels / castors
Rear wheel / castor brakes
With legs in inner position (par-
allel): Check that the distance
between legs can not decrease
when pushed together by hand
For Mover 180 only: Lifting
column is completely xed with
hexagon locking screws tightly
secured
For Mover 205 and 300 only:
Lifting column is completely
xed when locking handle is
engaged
Emergency stop button is fully
operational and interrupts
power when engaged.
Reset switch.
Electrical emergency lowering
Manual emergency lowering
Hand control (buttons, strain
relief on hand control cable,
hook, and battery indicator)
Sling bar coupling (swivel joint
moves freely and without noise)
Sling bar quick release
If all points so far are “OK”,
hoist shall be tested with SWL.
Perform one lifting cycle with
weight equal to SWL (see prod-
uct label for value kg/lbs).
Actuator must not slip when
loaded (causing lifting arm to
lower).
Leg spreading mechanism,
outwards and inwards with SWL
Perform new visual control;
Damage, play and deformations
as described above. Any dam-
aged parts must be repaired or
replaced and test is repeated
once more until the hoist
performs correctly
OK Not OK
Charger is operational
With fully charged battery
inserted, after initial cycle,
battery light is off, and wrench /
service light is green
Accessories:
......................................................................................
......................................................................................
......................................................................................
Performed by
Full name:
Date/Place:
Signature:
Approved without faults
Next inspection (YYYY / MM): .........../............
Hoist is marked with “Out of order” and sent
for repair
Hoist is not eligible for repair and taken out
of service
If periodic inspection reveals any defect, wear
or other damage that jeopardises the safety of
the patient the hoist may not be used until the
deciency has been eliminated
The owner is notied

6
Molift Mover 180, 205, and 300 | PI06101 Rev. D | www.etac.com
Due to legal requirements this docu-
ment or a copy must be led with the
owner’s service log book
If approved without faults, apply inspection label
and mark with month and year for next inspection.
When ordering label, use item no. 1100306
2
0
2
7
2
0
2
6
2
0
2
5
2
0
2
4
2
0
2
3
Next periodic
inspection
Inspection performed by:
Notes and observations
Mark label with
month and year for
next inspection