Etac 2Move User manual

Instruction for use
2Move
IMM1018_IFU.Version8.2019-06-17
Positioning Sitting
Sit to stand
Special solutions
Support
Transfer horizontal
Transfer sitting
Positioning Horizontal

2
Index
Illustrations ...........................................3
User manual – English .........................4
Bruksanvisning – Svenska...................9
Bruksanvisning – Norsk .....................14
Brugervejledning – Dansk..................19
Käyttöohjeet – Suomi.........................24
Gebrauchsanweisung – Deutsch ......29
Gebruiksaanwijzing – Nederlands.....34
Instruction d’utilisation – Francais....39
Istruzioni per l’uso – Italiano .............44
Instrucciones de uso – Español ........49
See www.etac.com

ES IT FR NL DE FI DA NO SV GB ILL.
3
Illustrations
1 2

4
General
Intended use
Intended environment
For use in transferring users between two beds or from a bed to
an operation table, stretcher, X-ray or hygiene table, etc.
Acute care, Long-term care, Home care.
To avoid accidents and injury when moving and handling the
products, please read this manual carefully.
The person described as “the user” in this “Instruction for Use”
is the person who is lying or sitting on the product. The carers
are the people who manoeuvre the product.
This symbol appears alongside the text in the
manual. It draws the reader’s attention to points at
which there may be a risk to the health and safety
of the user or carer.
These products comply with the standards applicable for Class 1
products in the European Council Directive MDD 93/42/EEC on
medical devices.
At Etac we strive to continually improve our products and
therefore we reserve the right to make changes to products
without prior warning. All measurements given on illustrations
and similar material are for guidance only and Etac cannot be
held liable for errors and defects.
The information given in this manual, including
recommendations, combinations and sizing, does not apply
to special orders and modications. If the customer makes
adjustments, repairs or uses combinations not predetermined
by Etac, the Etac CE certication and Etac warranty will not be
valid. If in doubt, please contact Etac.
Warranty: Two-year warranty on material and manufacturing
defects, provided that the product is used correctly.
For further information on the Etac transfer range,
see www.etac.com.
The product can be scrapped in accordance with national
regulations.
Symbols in general
Washing pH level Read the user manual
User mass limit =
maximum rated load
Do not bleach Wipe off Warning
The product can be
scrapped according to
national regulations
Tumbledry Never leave on the oor
Production year, month
and day Manufacturer
Iron Risk of sliding down Batch no./Lot no.
Class 1 - European
Council Directive MDD
93/42/EEC on medical
devices
Do not dryclean Keep out of the sun
Thank you for choosing an Etac product.

5
ES IT FR NL DE FI DA NO SV GB ILL.
Practical handling
2Move incl. nylon cover and/or tube foil is positioned under
the user by rolling the user slightly away from the direction of
movement, preferably using an absorbent sheet. 2Move is
positioned under the user after which the user is rolled back.
2Move should only be placed a few inches under the user.
Position the user’s head and legs carefully onto the board. If
possible, it is helpful to cross the user’s legs so that the leg that
is closest to the board is lowest with the other leg crossed over it.
Positioning
Use
By applying a little pressure to the shoulder and hip, the carer
can move the user over onto the other bed. If a sheet is used,
it is a good idea to position 2Move underneath the sheet.
Positioning then takes place as described above, but using the
sheet to pull on (Illustrations 1 and 2).
2Move can easily be removed by sliding 2Move out from under
the user: The carer places one hand over the board and the
other under it. Then, the carer eases the nylon material away
with the upper hand while pulling towards him/herself with the
lower hand.
2Move can also be removed by rst removing the board from
the cover and then removing the cover by pulling on the lower
layer of the cover.

6
Always check the product before use and after washing.
Never use a defective product. If the product shows signs of
wear-and-tear, it must be scrapped.
Read these instructions carefully.
It is important that carers receive instruction in manual
handling. Etac offers advice and training for carers.
For further information, contact Etac.
Always use the correct manual handling techniques.
Encourage the user to assist where possible.
To ensure that the user feels safe and that every manual handling
is smooth, always plan the manual handling in advance.
There is a risk that the user may slide off. Never leave
the user alone on the edge of the bed.
Never leave the product on the oor.
Always conduct a risk assessment, and ensure that
the assistive product can be used for the individual
user and, in combination with other devices, that it
is safe for the user and carers.
If in any doubt - please contact Etac.
Material:
2Move Transfer Board:
Plastazote
2Move Transfer Board Cover:
Cover: Nylon
Cover disposable: Polyethylene.
The product should be checked regularly, preferably each time
it is used.
Check that seams and fabric are not damaged.
Never try to repair a product yourself.
Never use a defective product.
Washing instructions:
2Move Transfer Board:
Can be wiped off with disinfectant.
2Move Transfer Board nylon Cover:
Do not use fabric softener. This product can be wiped off with
soapy water or cleaned with a solvent-free cleaning agent with a
pH level between 5-9, or a 70% disinfection solution.
MAX
150 kg
MAX 20 cm
MAX 150 kg
max
15
cm max
10
cm
max
20
cm
MAX 20 cm
MAX 150 kg
Material and cleaning
Special features
Notice

7
ES IT FR NL DE FI DA NO SV GB ILL.
Products and accessories
Article no. Product Description Size (mm)
IM8050095 2Move Transfer Board S W490xL950
IM8050190 2Move Transfer Board L W490xL1900
IM8070190 2Move Transfer Board XL W700xL1900
IM8150190 2Move Transfer Board L Non-Foldable W490xL1900
IM4034 Cover Disposable L W600xL2100
IM4035 Cover Disposable S W600xL1000
IM4036 Cover Disposable XL W800xL2100
IM4047 2Move Cover S W515xL790
IM4048 2Move Cover L W515xL1610
IM4049 2Move Cover XL W715xL1610
Article no. Product Description Size (mm)
IM4318 2Move L set. Incl. IM8050190 + IM4048
IM4319 2Move S set. Incl. IM8050095 + IM4047
IM4320 2Move L Non-Foldable set. Incl. IM8150190 + IM4048
IM4321 2Move XL set. Incl. IM8070190 + IM4049
Set
Article no. Product Description Size (mm)
IM4040 2Move Display W480xL250xH1250
Combinations

8
Manual transfer aids with handles, straps and buckles:
Manual transfer aids with high or low friction:
Manual transfer aids for sitting and lying transfer:
Thank you for choosing an Etac product.If the customer
makes adjustments, repairs or uses combinations not
predetermined by Etac, the Etac CE certication and Etac
warranty will not be valid.
Warranty: Two-year warranty on material and manufacturing
defects, provided that the product is used correctly. Before
taking a product into service always conduct a risk assessment
according to national and/or local legislation.
First inspection:
• Is the packaging intact?
• Read the label on the packaging and check the article no.
and product description.
• Check that Short Instruction is enclosed – updated
User Manual/Instruction for use can be downloaded from
www.etac.com or contact Etac Customer Service or your
local distributor.
• Check the label on the product - does it include article no.,
product description, lot/batch no., cleaning instructions
and supplier name?
Periodic Inspection:
• Make sure that your Manual transfer system is always in
perfect condition.
• After wash – always check materials, stitching, handles,
buckles.
• If the product shows signs of wear and tear, it must be
removed from service immediately.
Service information
Visual inspection/Check the product:
Ensure that the materials, seams, stitching,
handles, buckles are intact/faultless.
Mechanical load or stress/Test handles:
Pull hard on the handles in opposite directions
and check the material, seams and stitching.
Test buckles:
Lock the buckle and pull in opposite directions,
check the buckle and the stitching.
Class 1 - European Council
Directive MDD 93/42/EEC
on medical devices
The product can be
scrapped in accordance
with national regulations
Read the
User Manual
Stability test:
Try to bend the product and verify that it feels
rm, stable and solid.
Test low/high friction:
Place the product on a rm surface or a bed, place
your hands on the material and test the friction by
pushing your hands down into the product.
Low friction – slides effortlessly
High friction – no sliding/movement
Inspection
Check
If in doubt, please contact Etac Customer Service or local
distributor for more information and guidance.
For more information about training and the use of these
products, contact the Etac transfer experts – www.etac.com.

9
ES IT FR NL DE FI DA NO SV GB ILL.
Avsedd användning
Avsedd miljö
För föryttning av brukare mellan två sängar eller till exempel
från en säng till ett operationsbord, en bår, ett röntgenbord
eller ett skötbord.
Akutvård, långvarig vård och vård i hemmet.
Allmänt
Tack för att du har valt en produkt från Etac.
För att undvika olyckor och personskador vid hantering och
användning av produkten bör du läsa igenom bruksanvisningen
noga.
Den person som beskrivs som ”brukaren” i dessa instruktioner
är personen som ligger eller sitter på produkten. Hjälparna är de
personer som manövrerar produkten.
Den här symbolen förekommer i manualen
tillsammans med text. Den vill påkalla
uppmärksamhet när brukarens eller hjälparens
säkerhet kan äventyras.
Produkten uppfyller de standarder som gäller för klass
1-produkter i Europarådets direktiv MDD 93/42/EEG för
medicinsk utrustning.
På Etac strävar vi efter att hela tiden förbättra våra produkter.
Därför förbehåller vi oss rätten att göra ändringar av
produkterna utan att meddela detta i förväg. Alla mått som
anges på bilder och i liknande material är endast vägledande.
Etac kan inte hållas ansvariga för felaktigheter och brister.
Informationen i dessa instruktioner, inklusive rekommendationer,
kombinationer och storlekar, gäller inte för specialbeställningar
och modikationer. Om kunden gör några ändringar, reparationer
eller kombinationer som inte har godkänts av Etac, upphör
Etacs CE-certiering och garanti att gälla. Kontakta Etac om du
har några frågor.
Garanti: Två års garanti för material- och tillverkningsfel, under
förutsättning att produkten används på rätt sätt.
Mer information om Etacs sortiment av föryttningsprodukter
nns på www.etac.com.
Produkten kan avfallshanteras i enlighet med nationella
bestämmelser.
Allmänna symboler
Tvätt pH-nivå Läs bruksanvisningen
Största massa för
brukare = maximal
belastning
Ingen blekning Avtorkning Varning
Produkten kan avfalls-
hanteras i enlighet med
nationella bestämmelser
Torktumling Lämna aldrig på golvet
Tillverkningsdatum: år,
månad och dag Tillverkare
Strykning Nedglidningsrisk Batchnr/partinr
Klass 1 – Europarådets
direktiv MDD 93/42/
EEG för medicinsk
utrustning
Ingen kemtvätt Skydda från solljus

10
Praktiskt handhavande
2Move inklusive nylonöverdrag och/eller engångsöverdrag
placeras under brukaren genom att brukaren vänds bort från
rörelseriktningen, helst med ett absorberande lakan. Placera
2Move under brukaren och vänd tillbaka brukaren igen.
2Move ska endast läggas ett par cm under brukaren. Placera
brukarens huvud och ben försiktigt på skivan. Om möjligt korsas
brukarens ben så att det ben som ligger närmast skivan är
underst och det andra benet ligger korsat över det undre.
Plats
Användning
Genom att trycka lätt på axeln och höften kan hjälparen ytta
över brukaren till den andra sängen. Om ett lakan används
kan det vara bra att placera 2Move under lakanet. Placeringen
utförs sedan enligt ovan, men dra brukaren med hjälp av
lakanet (bild 1 och 2).
2Move går enkelt att ta bort genom att dra ut 2Move från under
brukaren: Hjälparen placerar en hand på skivan och den andra
under skivan. Därefter drar hjälparen bort nylonmaterialet med
den övre handen samtidigt som han/hon drar mot sig med den
undre handen.
2Move går även att ta bort genom att först ta bort skivan från
överdraget och sedan ta bort överdraget genom att dra i den
nedre delen.