ETEKCITY EB4410B User manual

Digital Body
Weight Scale
Model No.: EB4410B
Questions or Concerns?
Please contact us: [phone]
[e-mail]

Thank you for purchasing the Digital Body Weight Scale by Etekcity. This device can help you
reach your physical goals by conveniently allowing you to measure body weight with reliable
accuracy. Calculate and meet personal goals with simple step-on activation. Get fit with the
whole family. The EB4410B makes healthy living simple with high accuracy and convenient
automation.
We’re constantly working at building better living with the products and services we create.
Should you ever experience any issues with your new product, feel free to contact our helpful
customer service team via e-mail at [e-mail].
Thank You.

Table of Contents
Safety Information
Main Functions
Set-Up
Operation
Converting Weight Units
Battery Replacement
Specifications
Troubleshooting
Customer Support
Warranty Information
1
3
4
5
6
7
8
9
10
11

1
IMPORTANT: Please read, understand, and
comply with all of the instructions provided in
this manual before using the device. Failure
to comply with the instructions given in this
manual and/or using the device in ways other
than the ones mentioned in this manual may
result in serious injury and/or damage to the
product.
• The glass platform is slippery when wet.
Make sure the platform is dry before
stepping on for measurement.
• Consult your primary-care doctor or
physician before making changes to
your diet, exercise plans and/or physical
activities.
• This scale is not intended for commercial
use.
• To weigh safely and accurately, please
stand in the center of the platform and
stand still until a result is calculated.
• DO NOT strike or drop the scale.
• DO NOT stand on the edge of the scale or
jump on it.
• DO NOT stand on the scale platform for a
prolonged period of time or when not in
weighing operation.
• DO NOT store or operate near heat
sources or in humid environments.
• Always place the scale on a hard, dry and
flat surface before measurement.
• Handle the scale with care, as it is a
precision instrument.
• Clean the scale with a damp cloth and
avoid getting water or any other liquid
inside the scale.
• DO NOT use chemical or abrasive cleaning
agents to clean the scale.
• Keep the scale in a cool environment with
dry air.
• Always keep the scale in a horizontal
position, do not store vertically.
• If the scale fails to turn on, check whether
the batteries are installed correctly.
Replace the batteries if necessary.
Continued on page 2
Safety Information

2
• If an error appears on the display or if
the scale does not turn off automatically,
remove the batteries for 3 seconds, then
reinstall them.
• DO NOT overload the scale (max. weight
capacity: 200 kg / 440 lb).
• DO NOT mix new and used batteries or
different battery brands to power the scale.
• If the scale is not in use for an extended
period of time, remove the batteries to
ensure battery conservation and to extend
the scale service lifetime.

3
Main Functions
Function Diagram
1. Digital display
2. Unit selection
3. Weight result
4. Weight unit
5. Battery compartment
6. Anti-skid padding
1
5
26
3
4

4
Set-Up
Re-apply the batteries under the correct
polarity and re-seal the battery compartment
in order to activate the scale.
The 4 AAA 1.5V batteries are preinstalled in
the scale battery compartment. Open the
battery compartment cover located on the
backside of the scale and remove the plastic
film from the batteries.

5
Normal Weighing Mode
For best accuracy, place the scale on
a hard, flat floor. Avoid carpet or soft
surfaces. Gently step on the scale. The scale
will automatically activate.
Remain standing evenly on the scale, without
moving or shifting your feet or body while
the scale processes the results. The scale will
display and lock the stabilized result.
Operation
NOTE: For accuracy, the digital scale may trigger automatic calibration when physically lifted and moved or
when the unit of measurement is changed. Should a ‘C’ appear on the digital display at any time, wait for the
digital screen to display ‘0.0’, then step on to weigh with accuracy.

6
Converting Weight Units
Apply pressure on the scale platform to
activate the scale.
Then, press the unit conversion touch
button located on the backside of the scale
to convert between pounds and kilograms.
The LCD display will show the new unit of
measurement as you switch.

7
Battery Replacement
1. Open the battery compartment cover on
the backside of the scale.
2. Take out the used batteries and dispose
them properly.
3. Install 4 new AAA 1.5V batteries, taking
note of the correct polarity displayed
within the battery compartment.

8
Specifications
Weight Capacity: 440 lb / 200 kg
Graduation: 0.2 lb / 0.1 kg
Min Weight: 18 lb / 8 kg
Weight Units: lb / kg
Platform: Tempered glass
LCD Display: 100 x 50 mm
Battery: 4 x 1.5V AAA batteries
Auto-off: 15 seconds
Package Contents
1 x Digital Body Weight Scale
1 x User Manual
1 x Measuring Tape
4 x 1.5V AAA batteries (pre-installed)

9
Troubleshooting
Error Message Reason Solution
“Err” Scale overload.
Maximum weight
capacity: 440 lb (200 kg)
Step off the scale to
avoid damage.
“Lo” Battery power is low. Install new batteries.
“C” Re-calibrate scale. Apply weight on the
scale to power it on, then
step off and wait for the
LCD screen to display
‘0.0’. Then, step back on
the scale to weigh.

10
Customer Support
Should you encounter any issues or have any questions regarding your new product, feel
free to contact our helpful Customer Support Team. Your satisfaction is ours!
Etekcity Corporation
1202 N Miller Street, Suite A
Anaheim, CA 92806
Toll-Free: [phone]
Fax: [phone]
Local: [phone]
Email: [e-mail]
Live Chat: www.etekcity.com
Support Hours
Monday - Friday: 9:00am - 5:00pm PST
*Please have your order ID number ready before contacting customer support.

11
Terms & Policy
Etekcity warrants all products to be of the highest quality
in material, craftsmanship and service for a minimum
of 1 year, effective from the date of purchase. Warranty
lengths may vary between product categories. For specific
warranty terms, please refer to your product’s listing page or
operation manual.
Under the limited warranty, Etekcity will replace or refund
any parts found to be defective due to manufacturer flaws.
This warranty extends only to personal use and does not
extend to any product that has been used for commercial
use, rental use, or any other use in which the product is
not intended for. There are no warranties other than the
warranties expressly set forth with each product.
This warranty is non-transferrable. Etekcity is not responsible
in any way for any damages, losses or inconveniences
caused by equipment failure or by user negligence, abuse,
or use noncompliant with the user manual or any additional
safety, use, or warnings included in the product packaging
and manual.
Etekcity and its subsidiaries assume no liability for damage
caused by the use of the product other than for its intended
use or as instructed above and within the user manual. Some
Warranty Information
states do not allow this exclusion or limitation of incidental
or consequential losses so the foregoing disclaimer may not
apply to you. This warranty gives you specific legal rights
and you may also have other rights which may vary from
state to state.
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE
WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE
PERIOD OF THE LIMITED WARRANTY.
If your ETEKCITY product should require service:
Should your product prove defective within the specified
warranty period, please return the defective unit in its
original packaging with (1) an original copy of invoice, (2)
your order ID number, (3) and your warranty ID number.
EXCEPTIONS AND EXCLUSIONS
• Damage due to abuse, accident, alteration, misuse,
tampering or vandalism.
• Improper or inadequate maintenance.
• Damage in return transit.
• Unsupervised use by children under 18 years of age.

12
Date of Purchase: ____________________
Place of Purchase: ____________________
Warranty ID: ____________________
Order ID: ____________________
To register your warranty or to make a claim,
please contact our helpful customer support
team at [phone] or email support@
etekcity.com
Please keep this page for your records.
To receive a valid warranty ID number, sign
into your Etekcity customer account at www.
etekcity.com. At the top of the warranty
page, type in your order ID number located in
your order invoice to retrieve your warranty
ID number. Your warranty ID number will
then be sent to your email for your records.
If deemed defective, your product will be
replaced or refunded at no charge to you.

Scan here and join the community!
http://www.etekcity.com