ETEKCITY ESWO1-USA2 User manual

1
Voltson Smart WiFi Outlet
Model No.: ESW01-USA
Questions or Concerns?
Mon-Fri 9:00 AM - 5:00 PM PT
[email protected] • [phone]

2
Your smart outlet allows you to control electrical
appliances, such as lights, fans, and kitchen appliances
with your Android™ or iOS™ devices. Pair your smart
outlet with the Etekcity VeSync app to use your
phone to control your connected electrical appliances
anywhere, at any time. Set up your smart outlet with
the IFTTT™ (if this then that) app to program your
smart home.
If you have any questions or concerns, please
reach out to our helpful Customer Support Team at
[email protected]. We hope you enjoy your new
smart outlet!
Exclusive deals, giveaways, and product registration.
Better products for better living.
Find us here: etekcity.com
Thank you for purchasing the
Voltson Smart WiFi Outlet by Etekcity.
Become an Etekcitizen

3
Table of Contents
Package Contents
1 x Voltson Smart WiFi Outlet ESW01-USA
1 x Quick Start Guide
1 x Reminder Card
Package Contents 3 38
10
33
52
Functions
VeSync App Setup 8
26
19
56
37
• Smart Outlet Settings
Safety Information
FCC radiation exposure statement
5
7
38
39
18
35
57
• Set Timer
• Create Schedule
• Pairing Your Smart
Outlet with IFTTT
• Smart Conguration Mode
• Create an Applet Using
Existing VeSync Templates
• Create a Custom Applet
Maintaining Your Smart Outlet
Troubleshooting
Warranty Information
Customer Support
• Abnormal Power Protection
Specications
FCC statement to the user
4
6
38
10
33
55
• Turning Devices On/Off
Conguration 10
28
56
• Energy Saving Mode
Light Indicator Chart 8
40
40
43
46
18
51
33
• Away Mode
• APN Conguration Mode
• Share Your Smart Outlet
• Delete a Smart Outlet
More Features
IFTTT
• Connecting with Amazon Alexa
• Connecting with Google Home
• Log Out
• Firmware Updates
• Factory Reset

4
Specications
Communication Mode IEEE802.11b/g/n (WiFi)
Communication Frequency 2.4GHz
Wireless Distance
(Outlet to Router)
98-164 feet | 30-50 meters
(max visible range)
Maximum Switch Current 10A
AC Power Supply Range &
Supply Frequency AC 120V, 60Hz
Operating Environment -10°C-40C° | 14°F-104°F
Storage & Transportation
Environment -20°C-60C° | -4°F-140°F
Size 102 x 62 x 30 mm
Compatible Systems Android™ 4.3 or higher
iOS™ 8.0 or higher
NOTE: The outlet’s WiFi signal range can be weakened or
disrupted if:
• Your WiFi bandwidth is not 2.4GHz
• Your WiFi network and/or your smart outlet is blocked by
objects (such as walls, floors, or furniture) that are too thick
• Your WiFi signal interferes with other electrical appliances
(e.g. microwave ovens, wireless speakers, and LCD displays)

5
To reduce the risk of injury and/or damage to this
outlet, please read and follow all instructions and
safety guidelines in this manual.
• Do not exceed the maximum load current of 10A
(approximately 1200W) by plugging in appliances
that require a higher load current. Always check the
electrical power before use to avoid potential damage to
the device.
• Keep out of reach of children.
• Only use indoors, in a dry location.
• Always keep away from water or other liquids.
NOTE: This smart WiFi outlet complies with Part 15 of the FCC
Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that
may cause undesired operation.
Safety Information
SAVE THESE INSTRUCTIONS
Back to Table of Contents

6
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including
interference that may cause undesired operation.
Any changes or modications not expressly approved by the
party responsible for compliance could void the user’s authority
to operate this equipment.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference
by one of the following measures:
FCC statement to the user

7
• Reorient or relocate the receiving antenna.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for
help.
FCC radiation exposure statement
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. End users must follow the
specic operating instructions for satisfying RF exposure compli-
ance. To maintain compliance with FCC RF exposure compliance
requirements, please follow operation instructions as document-
ed in this manual. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
This equipment should be installed and operated with a minimum
distance of 20cm between the radiator and your body. The avail-
ability of some specic channels and/or operational frequency
bands are country dependent and are rmware programmed at
the factory to match the intended destination. The rmware set-
ting is not accessible by the end user.

8
• A smartphone or tablet running on iOS 8.0/Android 4.3
or higher.
• A 2.4GHz WiFi connection (supports 802.11b/g/n
standard).
The smart outlet is compatible with electrical appliances that use
10A current. Connecting an appliance that uses more than 10A
current may cause the outlet fuse to blow.
Product Requirements
Features:
Front Back
1. Power Button
2. LED Indicator
12

9
Light Indicator Chart
LED Light
Color Status Description
Yellow Solid Outlet is turned on
Blue
Solid Outlet is in Smart
Conguration Mode
Slow blinking
Outlet is in APN
Conguration Mode / Outlet
has gone ofine after being
connected
Blinks quickly, then
turns off Outlet was hard reset
Purple
Solid Outlet is in Smart
Conguration Mode
Alternating purple
and yellow
Outlet is in APN
Conguration Mode
None No light Outlet is off
Back to Table of Contents

10
VeSync App Setup
1. Connect your mobile device to a 2.4GHz WiFi network.
Note: The smart outlet will only setup on a 2.4GHz network.
Note: For Android users, you must select “Allow” to use
VeSync.
Note: You must create your own VeSync account to use third-
party services and products, such as the Amazon® Echo™,
Google Home™, and IFTTT™. The guest account will not work
for this. With a VeSync account, you can also allow your
family or friends to control your smart outlet.
2. Scan the QR code or download the VeSync app from the App
Store® or the Google Play™ store.
3. Open the VeSync app. Tap Sign Up to create a new account.
4. After you’ve signed up, enter your email and password, then
tap Log In.
Note: The VeSync app and IFTTT app user interfaces may appear
slightly different.
Available on the
App Store
GET IT ON
Google Play