ETEKCITY EK7017 User manual

1
Digital Kitchen Scale
Model No.: EK7017
Questions or Concerns? [e-mail] • [phone]

2
Thank You!
Thank you for purchasing the EK7017 Digital Kitchen
Scale by Etekcity. We are dedicated to providing our
customers with quality products for building on a better
living. Should you have any questions or concerns about
using your new product, feel free to reach out to our helpful
Customer Support team at [e-mail]. For
more contact information please refer to page 16. We hope
you enjoy your new product!

3
Table of Contents
Package Contents
Specifications
Safety Information
Main Functions
Digital Display
Set-Up
Operation
· Weight Measurement Mode
· Volume Measurement Mode
· Tare Function
Maintenance
Troubleshooting
Warranty Information
Customer Support
3
3
4
5
6
6
7
7
9
11
12
13
15
16
Package Contents
Specifications
Weight Capacity 176.4 oz / 11 lb / 5000 g /
5000 ml
Units oz / lb:oz / g / ml
Division Value 0.1 oz / 1 g / 1 ml
Auto-Off 120 seconds
Backlight Auto-off 30 seconds
Dimensions 9.2 x 6.3 x 0.6 in
(235mm x 160mm x 16.5 mm)
Battery 2 x 1.5V AAA Batteries
(Pre-installed)
1 x EK7017 Digital Kitchen Scale
2 x 1.5V AAA Batteries (Pre-installed)
1 x User Manual

4
SAVE THESE INSTRUCTIONS
• Always place the scale on a hard, dry, and flat
surface before measurement to ensure accurate
results.
• Dirt, dust, vibration, wind, air currents, and
electromagnetic interference may contribute to
inaccurate results.
• DO NOT exceed the 11 lb (5 kg) weight capacity;
doing so may damage the scale. An overload
indicator will appear on the LCD display if the
limit is exceeded.
• Avoid exposing the device to damp environments
or extreme temperatures.
• DO NOT immerse the scale in water or corrosive
liquids. If a liquid is spilled on the digital display
or buttons, immediately wipe the scale clean
with a soft cloth to avoid internal damage.
• When replacing batteries, make sure to insert
them under the correct polarity as indicated
within the battery compartment.
• If the low battery indicator appears on the
display, replace the batteries.
• DO NOT mix new and used batteries to power
the device.
• This scale is not intended for commercial or
heavy-duty use.
• Handle the scale with care. Keep the scale in a
cool, dry environment.
• If the scale fails to turn on, check if the batteries
are installed correctly. Replace the batteries if
necessary.
• If the scale is not in use for an extended period
of time, remove the batteries to conserve
battery life and extend the lifetime of the scale.
IMPORTANT: Please read and comply with all of the instructions and warnings provided in this manual
before using the product. Failure to comply with the instructions and warnings provided herein may result in
inaccurate results and/or damage to the product itself.
Safety Information

5
Main Functions
1. Weighing Platform
2. LCD Display
3. Unit Button
4. Power / Zero Button
5. Anti-skid Padding
6. Battery Compartment
1
3
4
2
5
6

6
Digital Display Set-Up
1. Battery
2. Tare Mode
3. Mode
4. Measurement Unit
5. Negative Weight Value
6. Weight Value
1. Open the battery compartment on the underside
of the scale.
2. Insert the included AAA batteries, making sure
they are under the correct polarity. Then, place
the battery cover back on. [Figure 1.1]
3. Press the ‘ ’ button to turn on the scale.
Figure 1.1
AAA batteries
6
5
1 2 3 4

7
Operation
1. Place the scale on a flat, dry surface.
2. Press ‘ ’ to turn on the scale. [Figure 2.1]
Figure 2.1 Figure 2.2
Weight Measurement Mode
3. Press ‘ UNIT ’ to select your desired measuring
unit. Allow the scale to read “0: 0.0” before
measuring. [Figure 2.2]

8
Weight Measurement Mode (cont.)
4. Gently place your object on the scale. The LCD
screen will automatically display the object’s
weight. [Figure 2.3]
5. Press and hold ‘ ’ for 3 seconds to turn off
the scale. [Figure 2.4]
NOTE:
• The scale with automatically turn off after 2 minutes of inactivity.
Figure 2.3 Figure 2.4
hold for
3 seconds

9
Volume Measurement Mode
Figure 3.1 Figure 3.2
1. Place the scale on a flat, level surface, then
press the ‘ ‘ to turn it on.
2. Press ‘ UNIT ’ to select either the milk or water
volume measurement mode.
3. The scale will display “0” when ready.
[FIgure 3.1]
4. Place an empty container onto the platform. The
screen will display the container weight.
[FIgure 3.2]

10
Volume Measurement Mode (cont.)
5. Press ‘ ’ button to tare the weight of the
container. [Figure 3.3]
Figure 3.3 Figure 3.4
6. Once the screen displays “0” pour the liquid
into the container. The LCD screen will
automatically display the final volume.
[Figure 3.4]
NOTE: To reset the scale, remove all weight from the
platform and press ‘ ’.