ETEKCITY FG830LB User manual

1
Questions or Concerns? [email protected]
Digital bluetooth body
fat scale
Model No.: FG830LB

2
Thank You.
Thank you for purchasing the FG830LB Digital bluetooth body
fat scale by Etekcity. We are dedicated to providing our
customers with quality products for building a better living.
Should you have any questions or concerns about using your
new product, feel free to reach out to our helpful Customer
Support Team at [phone] or by email at
[email protected]. We hope you enjoy your new
product!

3
Table of Contents
Package Contents
Specifications
Safety Information
Function Diagram
Setup
App Setup
Using Digital bluetooth body fat scale
• Weighing without the VeSync App
• Weighing with the VeSync App
Using the App
• Weight Measurements
— Add or Switch Users
— More Data
— Data Graphs
— Device Settings
Maintenance
• Cleaning the Scale
• Calibrating the Scale
• Replacing the Batteries
Display Messages
Troubleshooting
Warranty Information
Customer Support
Package Contents
1 x Digital bluetooth body fat scale
3 x 1.5V AAA Batteries (Pre-Installed)
1 x User Manual
Specications
Weight Capacity 400 lb / 28 st / 180 kg
Graduation 0.2 lb (0.1 kg)
Weight Units lb / st / kg
Platform Tempered Glass
Dimensions 11.8 x 11.8 x 1.0 in
(300 x 300 x 24mm)
Battery 3 x 1.5V AAA Batteries
Auto-Off 30 seconds
3
3
4
6
7
8
9
9
10
14
16
16
17
18
20
25
25
25
26
27
28
29
30

4
Safety Information
General Use
• Check the scale before using. Do not use the
scale if it is damaged in any way.
•Do not strike or bang on the scale, and do not
use the scale if there is a slight crack on the glass.
Due to the nature of tempered glass, the glass
will shatter if there is a slight crack. If you see a
crack, contact Customer Service (page 30).
Please read and follow all instructions and safety guidelines in this manual.
NOTE:
•This scale should not be used to diagnose or treat
any medical condition.
•Scale data should not be used as a substitute for
medical advice from a healthcare professional.
•This scale uses a harmless electrical current to
measure body fat. We do not recommend using
the scale if you use medical electronic equipment
such as a pacemaker. Consult a healthcare
professional before use.
• The glass platform is slippery when wet. Always
make sure the platform and your feet are dry
before stepping on for measurement.
•Place the scale on a hard, at surface to avoid
tipping.
• To weigh safely and accurately, stand with your
feet shoulder-width apart while on the scale. Do
not stand on the edge of the scale or jump on the
scale.
• Avoid standing on the scale for a long period of
time.
•Do not overload the scale. Maximum weight
capacity is 400 lb (180 kg).
• Keep the scale in a cool area with low humidity.
Keep the scale away from heat sources, such as
ovens or heaters. Store the scale horizontally, not
vertically.
• For household use only. This scale is not intended
for commercial use.
• Handle with care.

5
Batteries
•Do not mix new and used batteries.
• If the scale is not in use for a long period of time,
remove the batteries to extend the lifetime of the
scale.
NOTE: This smart scale complies with Part 15 of the
FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.

6
Function Diagram
1. Weighing Platform
2. Display
3. Anti-Skid Padding
4. Battery Compartment
5. Unit Conversion Button
6
Top Bottom
1
25
4
3

7
1.5v - AAA
1.5v - AAA
1.5v - AAA
Setup
Push down and Lift
Before First Use
1. Open the battery compartment on the bottom
of the scale. Remove the included AAA batteries
from the scale.
2. Remove the plastic wrap from batteries.
3. Replace the batteries. Follow the guidelines in
the battery compartment to match the +and -
terminals.

8
App Setup
1. Scan the QR code, or download the VeSync app
from the App Store or Google Play Store.
NOTE: For Android users, choose “Allow” (when
prompted) to use VeSync.
2. After you’ve signed up, enter your email and
password, then tap Log In.
NOTE: You must create your own VeSync account
to use third-party services and products, such as
the Amazon Echo and Google Home. These will not
work with the Guest account. You can also allow your
family or friends to use your smart scale.

9
Using Digital bluetooth body
fat scale
NOTE: If you are pregnant, some measurements
may not be accurate.
Weighing without the VeSync App
1. Place the scale on a hard, flat surface.
NOTE: Using the scale on a soft surfaces such as
carpets and mats will result in inaccurate
measurements.
2. Step onto the scale. The scale will automatically
turn on and start measuring your weight.
3. Keep standing on the scale until the digits on the
screen ash 3 times with your nal measurement.
NOTE: Press the unit conversion button on the
bottom of the scale to change units from kilograms
(kg) to pounds (lb) to stone (st).

10
Weighing with the VeSync App
Pairing with Scale with VeSync
1. Tap the +button to add your device. 2. Tap Scales.
2
1

11
3. Select the Etekcity Fitness Scale. 4. Go to your phone’s settings and turn on your
phone’s Bluetooth®. Tap Connect.
3
4

12
5. The app will take a moment to scan for devices.
Tap Etekcity Fitness Scale to connect.
6. If you can’t connect, tap Why couldn’t I connect
to my device? at the bottom of the screen.
5
6

13
7. After following the Troubleshooting steps,
tap <to return to the previous screen.
8. Then tap Search Again.
9. You’ve completed setup! Give your smart scale a
unique name, or simply use the default name.
NOTE: You can change the name and picture at any
time in “Device Settings”.
8
7

14
Using the App
1. On the “My Home” screen, tap on the name of
your smart scale.
NOTE: New users should enter physical information
to let the scale calculate accurate body metrics.
1

15
2. Stand on the scale. Your results will display.
Tap to access the following:
A. Add or Switch User (see page 16)
B. More Data (see page 17)
C. Data Graphs (see page 18)
D. Device Settings (see page 20)
NOTE:
•If you’re wearing shoes, or if you haven’t entered
physical information, the results will only show
weight.
A
B
C
D

16
A. Add or Switch Users
NOTE:
•The smart scale can only track up to 8 users. If
you need to add another user, delete an existing
user first.
•You can reset the scale by pressing and holding
the unit button for 10 seconds. This will remove
all users.
•Once user is deleted, there is no way to retrieve
deleted information.
Weight Measurement
Select a user by tapping on the prole picture, or
tap to add a new user.

17
B. More Data
This screen shows a comprehensive analysis of 6 health
metrics that the scale tracks. Tap <to return to the
previous screen.

18
2. You can view daily, weekly, or monthly progress.
Tap to view your weighing history.
1. Tap Data Graphs.
C. Data Graphs
1
2

19
3. Tap on any entry to see more information. 4. View analysis of the 6 health metrics that the
scale tracks.
NOTE: Swipe left on any entry to delete.
4
3

20
On the Device Settings screen, you can customize
the following scale settings:
a. Device Name
b. Icon
c. My Goals (see page 21)
d. Members (see page 22)
e. Weight Unit (see page 24)
f. Delete Device (see page 24)
D. Device Settings
a
b
c
d
e
f