ETEKCITY ESF37 User manual

1
Questions or Concerns? [email protected]
Smart Fitness Scale
Model No.: ESF37

2
Thank you for purchasing the ESF37 Smart
Fitness Scale by Etekcity.
If you have any questions or concerns, please
reach out to our helpful Customer Support Team at
[email protected]. We hope you enjoy your
new scale!
BECOME AN ETEKCITIZEN
Get exclusive deals, giveaways, and product
registration. Better products for better living.
Find us at etekcity.com

3
Table of Contents
Package Contents
Specifications
Safety Information
Function Diagram
Setup
• Before First Use
• App Setup
Using the Smart Scale
• Weighing without the VeSync App
• Weighing with the VeSync App
Using the App
• Add or Switch Users
• More Measurements
• Data Graphs
• Device Settings
Maintenance
• Cleaning the Scale
• Recalibrating the Scale
• Replacing the Batteries
Display Messages
Troubleshooting
Warranty Information
Customer Support
Package Contents
1 x Smart Fitness Scale
3 x 1.5V AAA Batteries (Pre-Installed)
1 x User Manual
Specifications
Weight Capacity 400 lb / 28 st / 180 kg
Increments 0.2 lb / 0.1 kg
Weight Units lb / st / kg
Platform Tempered Glass
Dimensions 11.8 x 11.8 x 1.0 in
(300 x 300 x 24 mm)
Battery 3 x 1.5V AAA batteries
Auto-Off 30 seconds
3
3
4
6
7
7
8
9
9
10
14
17
18
19
21
25
25
25
26
27
28
29
30

4
Safety Information
General Use
• Check the scale before using. Do not use the
scale if it is damaged in any way.
• Do not strike or bang on the scale, and do not
use the scale if there is a slight crack in the glass.
Due to the nature of tempered glass, the glass
will shatter if there is a slight crack. If you see a
crack, contact Customer Service (page 30).
Please read and follow all instructions and safety guidelines in this manual.
NOTE:
• This scale should not be used to diagnose or treat
any medical condition.
• Scale data should not be used as a substitute for
medical advice from a healthcare professional.
• This scale uses a harmless electrical current to
measure body fat. We do not recommend using
the scale if you use medical electronic equipment
such as a pacemaker. Consult a healthcare
professional before use.
• The glass platform is slippery when wet. Always
make sure the platform and your feet are dry
before stepping onto the scale.
• Place the scale on a hard, flat surface to avoid
tipping.
• To weigh safely and accurately, stand with your
feet shoulder-width apart while on the scale. Do
not stand on the edge of the scale or jump on the
scale.
• Avoid standing on the scale for a long period of
time.
• Do not overload the scale. Maximum weight
capacity is 400 lb (180 kg).
• Keep the scale in a cool area with low humidity.
Keep the scale away from heat sources, such as
ovens or heaters. Store the scale horizontally, not
vertically.
• Not intended for commercial use. Household use
only.
• Handle with care.

5
Batteries
• Do not mix new and old batteries.
• If the scale is not in use for a long period of time,
remove the batteries to extend the lifetime of the
scale.
NOTE: This smart scale complies with Part 15 of the
FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.

6
Function Diagram
A. Platform
B. Display
C. Anti-Skid Padding
D. Battery Compartment
E. Unit Conversion Button
6
Top Underside
A
B
E
D
C

7
Setup
Push down and lift
Before First Use
1. Open the battery compartment on the underside
of the scale. Remove the included AAA batteries
from the scale.
2. Remove the plastic wrap from batteries, or
remove the insulator strip from the battery
compartment.
3. Replace the batteries. Follow the guidelines in
the battery compartment to match the +and -
terminals.
1.5v - AAA
1.5v - AAA
1.5v - AAA

8
App Setup
1. Scan the QR code or search for “VeSync” to
download the app from the Apple App Store®or
the Google Play™Store.
NOTE: For Android users, you must select Allow to
use VeSync.
2. Open the VeSync app. If you have an existing
account, tap Log In to sign in to your account. If
not, tap Sign Up to create a new account.
NOTE: Due to app updates and improvements, the
contents of this manual may change without notice.
The VeSync app user interfaces may appear slightly
different.

9
NOTE: Using the scale on soft surfaces such
as carpets and mats will result in inaccurate
measurements.
Using the Smart Scale
NOTE: Some measurements may not be accurate if
you are pregnant.
Weighing without the VeSync App
1. Place the scale on a hard, flat surface.
2. Step onto the scale. The scale will automatically
turn on and start measuring your weight.
3. Keep standing on the scale until the digits
on the screen flash 3 times with your final
measurement.
NOTE: Press the unit conversion button on the
underside of the scale to change units from pounds
(lb) to stone (st) to kilograms (kg).

10
Weighing with the VeSync App
Pairing the Scale with VeSync
1. Tap +.2. Tap Scales.
1
2

11
3. Select Etekcity Fitness Scale (ESF37).4. Make sure your phone’s Bluetooth®is on in your
phone settings. Tap Connect.
4
3

12
5. The app will take a moment to scan for devices.
Tap Etekcity Fitness Scale to connect.
6. If the connection succeeded, go to step 9. If the
connection failed, tap Why couldn’t I connect
to my device? at the bottom of the screen.
6
5

13
7. After following the Troubleshooting steps,
tap <to return to the previous screen.
8. Then tap Search Again.
9. Give your smart scale a unique name, or simply
use the default name.
NOTE:
• You can change the name and picture at any time in
“Device Settings”.
• If you are a new user, you will need to enter physical
information so the scale can calculate body metrics.
8
9
7

14
Using the App
1. On the “My Home” screen, tap on the name of
your smart scale.
1

15
2. Step on the scale with bare feet. Keep
standing on the scale for 5–10 seconds. Your
measurements will appear in the VeSync app.
3. The app may ask whether you just measured
your weight. Tap Yes to confirm, or tap Other
Users for more options.
NOTE: If you see a series of zeroes on the scale
display, the scale is measuring your body fat and
sending measurements to the VeSync app.
2
3

16
4. Choose one of the following:
A. Add or Switch Users (see page 17)
B. More Measurements (see page 18)
C. Data Graphs (see page 19)
D. Device Settings (see page 21)
NOTE: If you’re wearing shoes, the app will only
show weight.
A
B
C
D

17
A. Add or Switch Users
NOTE: The smart scale can only track up to 8 users.
If you need to add another user, delete an existing
user first (see Edit Member, page 23).
Select a user by tapping on the profile picture, or
tap to add a new user.

18
B. More Measurements
Scroll down for a comprehensive analysis of 12
health metrics that the scale tracks. Tap on any of
the health metrics for more information.

19
2. You can view daily, weekly, or monthly progress.
Tap to view your weighing history.
1. Tap Data Graphs.
C. Data Graphs
1
2

20
3. Tap on any entry to see more information. 4. View the 12 health metrics that the scale tracks.
Tap on any of the health metrics for more
information.
NOTE: To delete, swipe left on an entry.
34