ETEKCITY ESF00+ User manual

1
Questions or Concerns? [email protected] • [phone]
Smart Fitness Scale
Model: ESF00+

2
Thank you for purchasing the
ESF00+ Smart Fitness Scale
by Etekcity.
If you have any questions or concerns, please
reach out to our helpful Customer Support
Team at [email protected]. We hope you
enjoy your new scale!
BECOME AN ETEKCITIZEN
Get exclusive deals, giveaways, and product
registration. Better products for better living.
Find us at etekcity.com

3
Table of Contents
Package Contents
Specications
Safety Information
Function Diagram
Digital Display
Vesync App Setup
Using the Smart Scale
• Weighing without the VeSync App
• Weighing with the VeSync App
• Connecting the Scale to WiFi
• Using the App
Connecting with Other Fitness Apps
Maintenance
Troubleshooting
Warranty Information
Customer Support
3
3
4
5
6
7
8
8
9
13
15
25
28
31
35
36
1 x Smart Fitness Scale
1 x USB Charging Cable
1 x Measuring Tape
1 x Quick Start Guide
Specications
Package Contents
Weight Capacity 400 lb / 28 st / 180 kg
Graduation 0.1 lb / 0.05 kg
Weight Units lb / st / kg
Platform ITO-coated glass
Dimensions 14.8 x 11.8 x 1.0 in /
375 x 300 x 24 mm
Battery Type 1000mAh Li-ion battery
Charging Time 3 hours
Input DC 5V, 500mA
Auto-Off 30 seconds

4
Safety Information
SAVE THESE
INSTRUCTIONS
Medical
General Use
• This scale should not be used to diagnose or treat any
medical condition.
• Scale data should not be used as a substitute for
medical advice from a healthcare professional.
• This scale uses a harmless electrical current to
measure body fat. Consult a healthcare professional
before using the smart scale if you use medical
electronic equipment such as a pacemaker.
• Check the scale before using. Do not use the scale if it
is damaged in any way.
• The glass platform is slippery when wet. Always make
sure the platform and your feet are dry before stepping
on for measurement.
• Place the scale on a hard, at surface to avoid tipping.
Please read and follow all instructions and safety
guidelines in this manual.
• To weigh safely and accurately, stand with your feet
shoulder-width apart while on the scale. Do not stand
on the edge of the scale or jump on the scale.
• Avoid standing on the scale for a long period of time, or
when not weighing yourself.
• Do not overload the scale. Maximum weight capacity is
400 lb / 180 kg.
• Keep the scale in a cool area with low humidity. Keep
the scale away from heat sources, such as ovens or
heaters. Avoid temperature uctuations. Store the
scale in a horizontal position, not vertical.
• Do not use while charging. Remove the USB charging
cable before using.
• Handle with care. Not for commercial use. Household
use only.

5
Function Diagram
A. Weighing Platform
B. Display
C. Anti-Skid Padding
D. Unit Switching Button
A
B
C
TOP
UNDERSIDE
D
E. Reset Button
F. USB Charging Socket
G. USB Charging Cable
E
F
G

6
Digital Display
A. WiFi Icon
B. Bluetooth®Icon
C. Battery Life Indicator
D. Weight Units
E. Weight Measurement
F. Fat/Muscle/Water/Bone/BMR Measurement
G. BMI Measurement
H. BMI Tooltips
A
B
C
E
D
G
F
H
lb
Fat
Muscle
Water
Bone
BMR
kg
%
%
%
%
Kcal
BMI

7
VeSync App Setup
1. To download the VeSync app, scan the QR code,
or search “VeSync” in the Apple App Store®or
Google Play™Store.
Note: Due to app updates and improvements, the contents
of this manual may change without notice. The VeSync app
user interface may appear slightly different.
2. Open the VeSync app. If you already have an
account, tap Log In. To create a new account,
tap Sign Up.
Note:
• This scale uses the VeSync app, not the VeSyncFit
app.
• For Android users, you may need to select Allow
to use VeSync.

8
Using the Smart Scale
1. Place the scale on a hard, at surface.
[Figure 1.1]
2. Step onto the scale. The scale will automatically
turn on and start measuring your weight.
3. Continue standing on the scale until the digits
on the screen ash 3 times, showing your nal
measurement. [Figure 1.2]
Weighing without the VeSync App
Figure 1.1
Figure 1.2
Note:
• To switch between pounds (lb), stone (st), and kilo-
grams (kg), press the unit switching button on the
underside of the scale.
• If you are pregnant, scale measurements will not be
accurate.

9
1. Tap .
Weighing with the VeSync App
Pairing the Scale with VeSync
2. Tap Scales.
1
2

10
3. Select Etekcity Fitness Scale (ESF00+). 4. Stand on the scale and tap Next.
3
4
Note: Make sure your phone’s Bluetooth®is turned on in
your phone settings.

11
5. The app will take a moment to scan for devices.
Tap Etekcity Fitness Scale to connect.
6. If the connection succeeded, go to step 9. If the
connection failed, tap Why can’t I connect to
my device? at the bottom of the screen.
5
6

12
7. After following the “Troubleshooting” steps,
tap <to return to the previous screen.
8. Then, tap Search Again.Note: You can change the name and picture at any time in
Device Settings.
8
9
7
9. Give your smart scale a unique name, or simply
use the default name.

13
1. Connect your phone to a secure 2.4GHz WiFi
network.
Optionally, connect your scale to WiFi after setup.
Connecting your scale to WiFi will allow you to view
your data from anywhere, even when you’re not at
home or within Bluetooth range of your scale.
Connecting the Scale to WiFi
Note:
• If the app fails to find your network, tap Why
can’t I nd my WiFi network? to see possible
reasons.
• If your SSID is set to hidden mode, tap Manual
WiFi Setup, select your encryption method, and
enter your SSID and password.

14
2. Enter your WiFi information and tap Connect.

15
Using the App
Creating a User
If you are a new user, you will need to enter physical
information before weighing yourself for the rst
time so the scale can calculate your body metrics.
Note:
• Entering inaccurate information will make the scale’s
measurements less accurate.
• If you don’t identify with the available gender options,
or are unsure, pick the choice that you think best
physically matches you. This choice is used for physical
measurements, such as body fat percentages.

16
1. On the “My Home” screen, tap on the name of
your smart scale.
2. Step on the scale with bare feet. Continue
standing on the scale for 5–10 seconds. Your
measurements will appear in the VeSync app.
Note: If you see a series of zeroes on the scale display,
the scale is measuring your body fat and sending
measurements to the VeSync app.
Weight Measurement
2
1

17
3. For further details, see:
A. More Measurements (page 18)
B. Data Graphs (page 19)
C. Device Settings (page 21)
Note: If you’re wearing shoes or socks, the scale cannot
measure health metrics such as body fat. Step on the scale
with bare feet.
A
B
C

18
Scroll down for a comprehensive analysis of the 12
health metrics that the scale tracks. Tap on any of
the health metrics for more information.
More Measurements

19
Data Graphs
1. Tap Data Graphs.2. You can view daily, weekly, or monthly progress.
Tap to view your weighing history.
1
2

20
3. Tap on any entry to see more information.
4. View the 12 health metrics that the scale tracks.
Tap on any of the health metrics for more
information.
Note: To delete, swipe left on an entry.