ETENON Fitness PC1608 User manual

Seated Leg Press
OWNER S MANUAL’
CAUTION
Please read all instructions in this manual before
use the equipment and keep the manual well.

2

Cautions
In order void es and property dam sto a human injuri age , before th s of thise u e series
equipment please the following mportant notices, read i .
1. Before u fse o the e ent pleasequipm read this Owner’s Manual carefully The.
equipment should be assembled strictly following the relevantand used instructions
in this m and can not change an ponents oranual, y of its com disassemble t f eelyi r .
2. It should ns ed thatbe e ur all e e b fully aware ty warnings andus rs hav een of the safe
precautions before they exercise on e e entth quipm .
3. Too loose-fitting clothing can not be worn and sports shoes should be t while, pu on
exercising.
4. The equipment should be a ly examined beforec reful training If there i ge. s dama ,
please do ot try o pair it by yourself Please ct yournot use it and do n t re . conta
supplier in time. It is necessary to inform af ert -sales service personnel as soon as
possible to get the ac repairedm hine .
5. Make sure the selector pin has fit well in its position before exercising and do not use
selector pin o ne coupled with th nt to o yther than the o is equipme av id an
injury.(Apply to le stationsing with cable)
6. The equipment should be c indoors and make sure that thepla ed , ground s f ati l , and
there are spaceenough around uipment for s to c e o thethe eq u er exer is n machine
freely.
7. Before u t machine please check the cables to ensing he , sure that cable is in the
groove o ey and attention sh e paid ally tof pull , ould b especi the end f cableo . (Apply
to single t with cablesta ion )
8. Only origina ched or m t rlly atta anufac ure provided w s ac can be used in thiseight t k
3

manufacturers’ weight stack plate. (Apply to single station w h bleit ca )
9. Child and ot lowed to be too lo t equipment while t s in usingpet are n al c se to he i i .
10.If exerciser feels dizzy or physical pain w ng he or should s ophile traini she t
exercising immediately and ult a d rcons octo .
11.The equipment should be ll d fined e and r dused in a we e plac unde well manage and
monitored t e equipment ownerway of h .
Before u t equipment please consult your physician ss expert andsing he and fitne ,
must be to read all tsure he if cations in this ownerspec i ’s manual Ma. nufacturer will
not be held responsible or y personal injury and property loss resulted from thef an
incorrect use t productsof he .
equipment and can not increase he eightt w of weight stack by use of other
4

Equipment Schematic
Upper shield
Adjusting knob
Backrest adjusting board
Pedal
Front shield
Backrest cushion
Main frame
Seat pad
5

Fitting instructions
1. When strip f theo f wrappage around the surface of equipment, be a ,should c reful do
not hurt chine with knife atches on the surfacethe ma scr .
2. When moving this equipment a c ent number of personnel should be, suffi i used to
prevent the equipment from collision or to avoid the s caused by per nel, injurie son
shortage.
3. Prior to t of the equipment make sure that he p ts are ete noinstalla ion , all t ar compl ,
missing hardware.
4. When install the equipment s o or more s s working tog to, hould have tw per on ether
ensure the accurate location of parts assembly.
5. When install the equipment should pay attention to ssembly instructions tothe a
prevent component fitting to a w some om onents being omittedrong place or c p .
6. The suitable in ation tool ould be used to avostall s sh id the equipment damages or
human injuries c s by the use of appropriate tools in on processau ed in the installati .
7. If need o ve equipment the movement must be af tion oft mo , ter the comple
installation The equipment can t e m he. no b oved w n he s lation process hat in tal sn’t
finished or locking hnut asn’t been ig tenedt h up.
8. Attention ce of fa c ing nut when the vshould be paid to the sequen stening lo k , o erall
installation of the quipment is no shed should no hten up the nut that ise t fini , t tig
being installed After the whole. machine is properly fitted the lotogether, cking nuts
can be tightened p o by oneu ne .
9. Before st llation the cable rminals should hecked to make sure whetherin a te be c they
are firm. (Apply to ingle st tion bles a with ca )
10.After the completion of installation s rt t initial trial o he e ent with, ta he f t quipm gentle
6

the machine If something s is found with ment that. unu ual the equip , it is necessary
to check the equipment carefully identify the probl s and, em reinstall it.
Warranty
* : FramTen years Main es
* y : , , , eight p , , wiOne ear Bushings Pivot bearings guide rods W late cams s vel welding
parts Pull, -pin components
* ar: F , ubber gr , , .Half ye inish r ips belt cables
*Three Months upholstery:
force Make t that he t is w y normity before. cer ain t equipmen ithout an ab normally use
7

Assembly step1
Steps No. Description Specifications Qty
1Main frame 1
42 Plain washer Φ24*Φ13*2.5 8
43 Spring washer M12 8
44 Hex socket head cap screw M12*30 8
67
Door frame 1
1
8

Assembly step2
Steps No. Description Specifications Qty
3Front swing span 1
4Main swing span 1
5Pedal frame 1
14 Axle Φ25*249 3
49
Circlips for shaft Φ25 4
2
9

Assembly step3
Steps No. Description Specifications Qty
1Main frame 1
11 Left handle bracket 1
12 Right handle bracket 1
45 Plain washer Φ20*Φ10.5*2 4
47
Nylon insert lock nut M10 2
3
10

Assembly step4
Steps No. Description Specifications Qty
8Backrest support 1
10 Backrest adjusting board 1
17 Axle 3 Φ25*176 1
35 Limiting rubber 2
49 Circlips for shaft Φ25 2
54 Plain washer Φ16*Φ8.4*1.6 4
55 Spring washer M8 4
56 Hex socket head cap screw M8*25 2
57 Hex socket head cap screw M8*20 2
4
11

Assembly step5
Steps No. Description Specifications Qty
15 Backrest cushion 1
16 Seat pad 1
54 Plain washer Φ16*Φ8.4*1.6 6
55 Spring washer M8 6
56 Hex socket head cap screw M8*25 6
5
12

Assembly step6
74
55
67
73
77
76
75
22
62
79
83
75
13
57
Steps No. Description Specifications Qty
13 Cable set 1
22 20lb weight stack plate 14
55 Spring washer M8 2
57 Hex socket head cap screw M8*20 2
62 10lb weight stack plate 1
67 Door frame 1
73 Guild rod st ator 1
74 Big washer Φ24*Φ8.4*2 2
75 Rod end cover 4
76 Rubber bumper 2
77 Selector pin 1
79 Rubber bumper Φ38*Φ22*8 2
83 Guide rod 2
6
13

Assembly step7
55
57
64
67
66
65
65
68
66
69
Steps No. Description Specifications Qty
55 Spring washer M8 2
57 Hex socket head cap screw M8*20 2
64 Front shield 1
65 Hex socket head cap screw M6*16 6
66 Plain washer Φ12*Φ6.4*1.6 6
67 Door frame 1
68 Upper shield 1
69 Shield fixation column 2
7
14

15

Exploded View
16

Exploded List
No. Description Specifications Qty
1Main frame 1
2Joint fram e 1
3Front swing span 1
4Main swing span 1
5Pedal frame 1
6Bearing frame 1
7Adjusting fram e 1
8Backrest support 1
9Handle frame 1
10 Backrest adjusting board 1
11 Left handle bracket 1
12 Right handle bracket 1
13 Cable set 1
14 Axle 2 Φ25*249 3
15 Backrest cushion 1
16 Seat pad 1
17 Axle 3 Φ25*176 1
18 Adjusting plunger 1
19 Bevel plunger 1
20 Axle 2 1
21 Knuckle bearing M10 1
22 20lb weight stack plate 14
23 Steps rolling bearing 12
24 Iron base bushing 2
25 M20 nut 2
26 Spring 2
27 Reed nut HLM-G B25 2
28 End ring Φ25*14 2
29 End cover Φ25*121 2
30 Handle grip Φ31.5*Φ24*110 2
31 Pulley Φ114*25.4 5
32 Rubber bumper 2
33 Rot ary knob 2
34 Rubber bumper 1
35 Limiting rubber 2
36 Elliptical tube stopper 2
37 Rubber mat 3
38 Washer 2
39 Air spring 1
40 15 holes shaft 1
41 Spring pin Φ3*20 1
42 Plain washer Φ24*Φ13*2.5 8
17

Exploded List
No. Description Specifications Qty
43 Spring washer M12 8
44 Hex socket head cap screw M12*30 8
45 Plain washer Φ20*Φ10.5*2 22
46 Hex socket head cap screw M10*50 3
47 Nylon insert lock nut M10 8
48 Hex socket head cap screw M10*75 1
49 Circlips for shaft Φ25 10
50 Hex socket head cap screw M10*30 4
51 Spring washer M10 2
52 Hex socket head cap screw M10*55 2
53 Hex socket head cap screw M10*25 2
54 Plain washer Φ16*Φ8.4*1.6 12
55 Spring washer M8 12
56 Hex socket head cap screw M8*25 8
57 Hex socket head cap screw M8*20 6
58 Hex socket head cap screw M10*35 2
59 Counter sunk hex socket screws M8*20 2
60 Slotted set screws with cone point M4*5 2
61 Guide sleeve 1
62 10lb weight stack plate 1
63 Spring pin 10*45 1
64 Fr ont shield 1
65 Hex socket head cap screw M6*16 6
66 Plain washer Φ12*Φ6.4*1.6 6
67 Door frame 1
68 Upper shield 1
69 Shield fixation column 2
70 Rubber mat 4
71 Hexagon socket button head screw M8*16 8
72 Pulley catch 1
73 Guild rod stator 1
74 Big washer Φ24*Φ8.4*2 2
75 Rod end cover 4
76 Rubber bumper 2
77 Selector pin 1
78 Cage nut M8 2
79 Rubber bumper Φ38*Φ22*8 2
80 Shield fixation plate 2
81 Cross recess pan head self-tapping screw ST4.2*13 4
82 Stopple Φ10*8.5 1
83 Guide rod 2
84
18

Maintenance Attentions
Daily Maintenance ()Basic Maintenance
1. Clean the seat pad b ck pad and cushion with ater and soft cloth order, a warm w in
to avoid s ethe w at erosion t s componento the e .
2. Clean the frame with warm water and soft cloth.
3. Cleaning chrome at parts wipe them hol moistened o t c thpl ed : with alco s f lo .
Monthly M enanaint ce ( ainte )Basic M nance
1. Check t m ssion cab k the ght ss and s on of erans i le. Chec ti ne abra i the cabl
( sur e, , di s on).disrepair of the fac bend stortion and o (Apply to sing stat withle ion
cable)
2. Check guide and wipe it with s er cloth and alcohol and l c itrod, oft dust , ubri ate by
anticorrosive oil but please don, ’t let e c s ve a c ulated on rodx es i oil c um . (Apply to
single s at tion with cable)
3. Check w t stack to any damagedeigh know if there is steel plate which caused by
too much force or friction on rod. (Apply to sing tat with cablele s ion )
4. Check pulley on whether its groove surface is clean and whether it runs smoothly.
(Apply t ion witho single stat cable)
5. Check bol ng p ts W m with alcohol and anticorrosive oilts and fixi ar . ipe the .
Further Maintenance
1. Check w olts on ba c frame e l ose springshether b si becom o , have damaged and
the tightness of drive cable.
2. Check if there is rust or paint loss on main frame and basic rack clean out rust, , by
sand paper nd then cover i t same color paint from he s e supplier, a t wi h t am .
3. Clean and c te e p elubri a ev ry bearing, and kee quipment ork smoothlyw.
4. Check w t oil cylinder suffers oil leakagehether he .
19