ETENON Fitness PC1609 User manual

Abdominal Curl
/Back Extension
OWNER S MANUAL’
CAUTION
Please read all instructions in this manual before
use the equipment and keep the manual well.

2

Cautions
In order void es and property dam sto a human injuri age , before th s of thise u e series
equipment please the following mportant notices, read i .
1. Before u fse o the e ent pleasequipm read this Owner’s Manual carefully The.
equipment should be assembled strictly following the relevantand used instructions
in this m and can not change an ponents oranual, y of its com disassemble t f eelyi r .
2. It should ns ed thatbe e ur all e e b fully aware ty warnings andus rs hav een of the safe
precautions before they exercise on e e entth quipm .
3. Too loose-fitting clothing can not be worn and sports shoes should be t while, pu on
exercising.
4. The equipment should be a ly examined beforec reful training If there i ge. s dama ,
please do ot try o pair it by yourself Please ct yournot use it and do n t re . conta
supplier in time. It is necessary to inform af ert -sales service personnel as soon as
possible to get the ac repairedm hine .
5. Make sure the selector pin has fit well in its position before exercising and do not use
selector pin o ne coupled with th nt to o yther than the o is equipme av id an
injury.(Apply to le stationsing with cable)
6. The equipment should be c indoors and make sure that thepla ed , ground s f ati l , and
there are spaceenough around uipment for s to c e o thethe eq u er exer is n machine
freely.
7. Before u t machine please check the cables to ensing he , sure that cable is in the
groove o ey and attention sh e paid ally tof pull , ould b especi the end f cableo . (Apply
to single t with cablesta ion )
8. Only origina ched or m t rlly atta anufac ure provided w s ac can be used in thiseight t k
3

manufacturers’ weight stack plate. (Apply to single station w h bleit ca )
9. Child and ot lowed to be too lo t equipment while t s in usingpet are n al c se to he i i .
10.If exerciser feels dizzy or physical pain w ng he or should s ophile traini she t
exercising immediately and ult a d rcons octo .
11.The equipment should be ll d fined e and r dused in a we e plac unde well manage and
monitored t e equipment ownerway of h .
Before u t equipment please consult your physician ss expert andsing he and fitne ,
must be to read all tsure he if cations in this ownerspec i ’s manual Ma. nufacturer will
not be held responsible or y personal injury and property loss resulted from thef an
incorrect use t productsof he .
equipment and can not increase he eightt w of weight stack by use of other
4

Equipment Schematic
Upper shield
Front shield
Seat pad
Back cushion
Main frame
Round pad
Swing span
Seat tube Cam set
5

Fitting instructions
1. When strip f theo f wrappage around the surface of equipment, be a ,should c reful do
not hurt chine with knife atches on the surfacethe ma scr .
2. When moving this equipment a c ent number of personnel should be, suffi i used to
prevent the equipment from collision or to avoid the s caused by per nel, injurie son
shortage.
3. Prior to t of the equipment make sure that he p ts are ete noinstalla ion , all t ar compl ,
missing hardware.
4. When install the equipment s o or more s s working tog to, hould have tw per on ether
ensure the accurate location of parts assembly.
5. When install the equipment should pay attention to ssembly instructions tothe a
prevent component fitting to a w some om onents being omittedrong place or c p .
6. The suitable in ation tool ould be used to avostall s sh id the equipment damages or
human injuries c s by the use of appropriate tools in on processau ed in the installati .
7. If need o ve equipment the movement must be af tion oft mo , ter the comple
installation The equipment can t e m he. no b oved w n he s lation process hat in tal sn’t
finished or locking hnut asn’t been ig tenedt h up.
8. Attention ce of fa c ing nut when the vshould be paid to the sequen stening lo k , o erall
installation of the quipment is no shed should no hten up the nut that ise t fini , t tig
being installed After the whole. machine is properly fitted the lotogether, cking nuts
can be tightened p o by oneu ne .
9. Before st llation the cable rminals should hecked to make sure whetherin a te be c they
are firm. (Apply to ingle st tion bles a with ca )
10.After the completion of installation s rt t initial trial o he e ent with, ta he f t quipm gentle
6

the machine If something s is found with ment that. unu ual the equip , it is necessary
to check the equipment carefully identify the probl s and, em reinstall it.
Warranty
* : FramTen years Main es
* y : , , , eight p , , wiOne ear Bushings Pivot bearings guide rods W late cams s vel welding
parts Pull, -pin components
* ar: F , ubber gr , , .Half ye inish r ips belt cables
*Three Months upholstery:
force Make t that he t is w y normity before. cer ain t equipmen ithout an ab normally use
7

Assembly step1
19129 23 34
Steps No. Description Specifications Qty
1Doorframe 1
19 Hex socket head cap screw M12*30 4
23 Spring washer M12 4
29 Plain washer Φ24*Φ13*2.5 4
34
Transverse connecting frame 1
1
8

Assembly step2
28
29
23
19
34
8385
33
Steps No. Description Specifications Qty
19 Hex socket head cap screw M12*30 4
23 Spring washer M12 4
28 Plain washer Φ20*Φ10.5*2 2
29 Plain washer Φ24*Φ13*2.5 4
33 Main frame 1
34 Transverse connecting frame 1
83 Hex socket head cap screw M10*35 2
85
Spring washer M10 2
2
9

Assembly step3
35
40 753436
Steps No. Description Specifications Qty
34 Transverse connecting frame 1
35 Swing span 1
36 Cam holder 1
40 Camshaft 1
75 Circlips for shaft Φ25 1
3
10

Assembly step4
756677
43
38
10
36
10
70
71
Steps No. Description Specifications Qty
10 Pulley Φ114*25.4 2
38 Cable set 1
43 Swing span 1
66 End cover Φ60*15 1
70 Pulley Φ89*25. 4 1
71 Wide pulley Φ116*47 1
75 Circlips for shaft Φ25 1
77 Countersunk hex socket screws M8*20 1
4
11

Assembly step5
22
27
65
89
86
35
77
87 27
88
22
89
Steps No. Description Specifications Qty
22 Spring washer M8 6
27 Plain washer Φ16*Φ8.4*1.6 6
65 End cover Φ50*15 1
77 Countersunk hex socket screws M8*20 1
86 Round pad 1
87 Back cushion 1
88 Seat pad 1
89
Hex socket head cap screw M8*35 6
5
12

Assembly step6
13
38
2
25
22
17
6
32
47
14
31
52
85
82
55
54
7
11
Steps No. Description Specifications Qty
2Guild rod stator 1
6Guide rod 2
7Selector pin 1
11 Rod end cover 4
13 Rubber bumper 2
14 Spring pin 10*45 1
17 Hex socket head cap screw M8*20 2
22 Spring washer M8 2
25 Big washer Φ24*Φ8.4*2 2
31 Stopple Φ10*8. 5 1
32 Rubber bumper Φ38*Φ22*8 2
38 Cable set 1
47 15holes shaft 1
52 10lb weight stack plate 1
54 20lb weight stack plate 9
55 10lb weight stack plate 6
82 Hex socket head cap screw M10*25 4
85 Spring washer M10 4
6
13

Assembly step7
26
4
27
1
26
16
9
8
16
17
Steps No. Description Specifications Qty
1Doorframe 1
4Shield fixation column 2
8Upper shield 1
9Front shield 1
16 Hex socket head cap screw M6*16 2
17 Hex socket head cap screw M8*20 2
26 Plain washer Φ12*Φ6.4*1.6 2
27 Plain washer Φ16*Φ8.4*1.6 2
7
14

Exploded View
34
9
26 16
16 26
8
10
4
18 28
3
28 30
1
18 28 28 30
27
17
20 20
12
11
13
54 7
71 28 85 84
38 32
14 31
85 82 55
70
29
23 19
19 23 29
42
24
17
22 25
11 2
77 66 75 43 73 40 73 36
79
81
21 26
69
69
2621
81 75
80
78 67
50 72
68 76
87
88 37 27
22 89 27 22 89 63
74
44
45
51
74
46
83
85
28
64
33
58
64 59
60
53 35 86 65 77
62
49
48
39
73
57
61
30 28
28
18
5
15 10
16
26 21
47
6
41
85
52
15

Exploded List
No. Description Specifications Qty
1Doorframe 1
2Guild rod stat or 1
3Pulley catch 1
4Shield fixation column 2
5Shield fixation plate 2
6Guide rod 2
7Selector pin 1
8Upper shield 1
9Fr ont shield 1
10 Pulley Φ114*25.4 2
11 Rod end cover 4
12 Rubber mat 4
13 Rubber bumper 2
14 Spring pin 10*45 1
15 Cross recess pan head self-tapping screw ST4.2*13 4
16 Hex socket head cap screw M6*16 6
17 Hex socket head cap screw M8*20 4
18 Hex socket head cap screw M10*50 3
19 Hex socket head cap screw M12*30 8
20 Hexagon socket button head screw M8*16 8
21 Spring washer M6 5
22 Spring washer M8 8
23 Spring washer M12 8
24 Cage nut M8 2
25 Big washer Φ24*Φ8.4*2 2
26 Plain washer Φ12*Φ6.4*1.6 9
27 Plain washer Φ16*Φ8.4*1.6 8
28 Plain washer Φ20*Φ10.5*2 9
29 Plain washer Φ24*Φ13*2.5 8
30 Nylon insert lock nut M10 3
31 Stopple Φ10*8.5 1
32 Rubber bumper Φ38*Φ22*8 2
33 Main frame 1
34 Transverse connecting frame 1
35 Swing span 1
36 Cam holder 1
37 Cushion frame 1
38 Cable set 1
39 Pilot plunger 1
40 Camshaft 1
41 adjust ment past er 1
42 non-slip mat 1
16

Exploded List
No. Description Specifications Qty
43 Swing span 1
44 Fixed axle 1
45 Torsion spring 1
46 Limiting screw 1
47 15holes shaft 1
48 Spring 1
49 M20 nut 1
50 Reed nut 2
51 Adjusting handle 1
52 10lb weight stack plate 1
53 10lb counterweight 1
54 20lb weight stack plate 9
55 10lb weight stack plate 6
56 Round tube stopper 1
57 Rotary locating bush 1
58 Handle grip 4
59 Elliptical tube stopper 1
60 Elliptical tube stopper 1
61 Rubber bumper 1
62 Rotary knob 1
63 Hollow pipe sleeve 1
64 Rubber mat 2
65 End cover Φ50*15 1
66 End cover Φ60*15 1
67 End cover Φ25*21 2
68 End ring Φ25*14 2
69 Rubber bumper Φ42*Φ32*22 3
70 Pulley Φ89*25.4 1
71 Wide pulley Φ116*47 1
72 Handle grip R-C-6204-110 2
73 Steps rolling bearing 6
74 Split washer d=6 2
75 Circlips for shaft Φ25 2
76 Slotted set screws with cone point M4*5 2
77 Count er sunk hex socket screws M8*20 2
78 Count er sunk hex socket screws M6*25 2
79 Cross recessed countersunk head screw M5*10 3
80 Hex socket head cap screw M6*10 1
81 Hex socket head cap screw M6*20 3
82 Hex socket head cap screw M10*25 4
83 Hex socket head cap screw M10*35 2
84
Hex socket head cap screw M10*70 1
17

Exploded List
No. Description Specifications Qty
85 Spring washer M10 8
86 Round pad 1
87 Back cushion 1
88 Seat pad 1
89 Hex socket head cap screw M8*35 6
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
18

Maintenance Attentions
Daily Maintenance ()Basic Maintenance
1. Clean the seat pad b ck pad and cushion with ater and soft cloth order, a warm w in
to avoid s ethe w at erosion t s componento the e .
2. Clean the frame with warm water and soft cloth.
3. Cleaning chrome at parts wipe them hol moistened o t c thpl ed : with alco s f lo .
Monthly M enanaint ce ( ainte )Basic M nance
1. Check t m ssion cab k the ght ss and s on of erans i le. Chec ti ne abra i the cabl
( sur e, , di s on).disrepair of the fac bend stortion and o (Apply to sing stat withle ion
cable)
2. Check guide and wipe it with s er cloth and alcohol and l c itrod, oft dust , ubri ate by
anticorrosive oil but please don, ’t let e c s ve a c ulated on rodx es i oil c um . (Apply to
single s at tion with cable)
3. Check w t stack to any damagedeigh know if there is steel plate which caused by
too much force or friction on rod. (Apply to sing tat with cablele s ion )
4. Check pulley on whether its groove surface is clean and whether it runs smoothly.
(Apply t ion witho single stat cable)
5. Check bol ng p ts W m with alcohol and anticorrosive oilts and fixi ar . ipe the .
Further Maintenance
1. Check w olts on ba c frame e l ose springshether b si becom o , have damaged and
the tightness of drive cable.
2. Check if there is rust or paint loss on main frame and basic rack clean out rust, , by
sand paper nd then cover i t same color paint from he s e supplier, a t wi h t am .
3. Clean and c te e p elubri a ev ry bearing, and kee quipment ork smoothlyw.
4. Check w t oil cylinder suffers oil leakagehether he .
19