Vivo DESK-V111GT User manual

Black 36" Pneumatic Mobile Compact Desk
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/desk-v111gt
SKU: DESK-V111GT
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual and do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
PACKAGE CONTENTS
WARNING!
1 (x1)
Desktop
2(x1)
Desk Support
Bracket
3(x1)
Desk Support
Bracket
A (x4)
Caster
B x17)
M5x14
C(x8)
M6x14
4 (x1)
Frame
5 (x1)
Leg
6 (x1)
Keyboard Shelf
8(x1)
Support
Bracket
9(x1)
Base
10 (x2)
Le/Right
Bracket
7(x2)
Keyboard
Support
Bracket
D (x6)
M5x12
E x4)
M6x30
F(x1)
4mm Allen
Wrench
G(x1)
Cable Clip
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

3
Phillips
Screwdriver
TOOLS NEEDED
33lbs
(15kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
ASSEMBLY STEPS
STEP 1
Screw the casters (A) into the underside of the base (9). Secure the support bracket (8) to the base
using x4 M6x14 bolts (C). Install the leg (5) to the base using x4 M6x30 bolts (E). Tighten all bolts with
the Allen wrench (F).

4
STEP 2
Slide the frame (4) onto the top of the leg, making sure the long end is facing forward. Install a desk
support bracket (2) to the rear using two M6x14 bolts (C) in the inner two holes, and a support bracket
(3) to the front using two M6x14 bolts in the outer two holes. Tighten all bolts with the Allen wrench.
STEP 3
Install the desktop (1) to the top of the frame using
x6 M5x14 bolts (B), then install keyboard support
brackets (7) and release lever to desktop using x11
M5x14 bolts. Tighten with a Phillips screwdriver.

5
STEP 4
Secure le and right brackets (10) to keyboard shelf (6) using x6 M5x12 screws (D), and tighten with a
Phillips screwdriver. Mount the keyboard shelf to the support brackets using the knobs pre-installed
on the brackets.

6
STEP 5
Place monitor, keyboard, mouse and other items on the desk. Use cable clip (G) to organize cables.
Li the release lever to raise and lower the desk.
STEP 6
If lock is not releasing properly to change desk height, adjust the position of the black tube containing
the steel release cable. Turn the nuts at the end of the tube just behind the handle as shown, moving
the tube away from the handle until the cable once again has proper tension, then tighten the nuts.

7
CAUTION!
Failure to follow these instructions may result in property damage and/or personal injury.
motion 16.5" (42cm).

LAST UPDATED: 03/04/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303