eTIGER S3b Sim Secual User manual

www.etiger.com
Quick Start Guide
S3b Sim Secual / S3b Sim Vid Secual
EN

Settings
SIM PIN
Request a PIN code to
unlock the phone.
O
Control panel’s
SIM card
Disable the security of your control panel’s SIM card
The S3b control panel interacts with you thanks to a SIM card
(sold separately). Before inserting your SIM card in the control
panel, make sure the SIM security is o. To proceed, insert the
SIM card in a mobile phone, browse the settings of the phone
and make sure the SIM card is unlocked (the PIN code may by
required to unlock the SIM card).
A piece of advice
For your control panel’s SIM card, we advise you to choose a
plan with unlimited text and 1 or 2h voice.

SIM
Insert the SIM card in the control panel
Open the battery compartment at the back of your control
panel and insert the SIM card in the control panel’s SIM card
slot.
Attention
Insert the SIM card according to the shape of the SIM card
slot.

Turn the control panel on
Plug the AC adaptor to an AC socket. Plug the output
connector of the AC adaptor into the adaptor interface in
the battery compartment at the back of the control panel.
Turn the power switch to “ON” and put back the cover of the
battery compartment. The control panel is turning on.
Attention
Make sure you have inserted a SIM card in the control panel
before turning it on.

UP
Mount the control panel on a wall
Screw the wall mount onto the wall where you wish to install
your control panel. Fix the control panel on the wall mount.
A piece of advice
Make sure the control panel is rmly xed on the wall mount.
Because of the tamper switch, the alarm rings out if the control
panel is separated from the wall mount.
Before mounting the control panel, make sure the GSM signal is
sucient: make a phone call to your control panel’s SIM card. Once
you are through, press 1234# and then 1on your phone. If this
operation arms your system, the GSM signal is sucient. If nothing
happens or if you go to voice mail, the GSM reception is not sucient.

0001
Ok
Blinks once every second: searching GSM network
Blinks once every two seconds: GSM reception is ready
Change the system language
Send “0001” by SMS to the control panel to set the system
language to English.
The control panel replies “Ok” as a conrmation.
Attention
Before sending the SMS, make sure the GSM reception is
ready. The reception is ready when the indicator blinks
once every two seconds.

SMS numbers:
1.
2.
3.
4.
SMS numbers:
1.0600112233
2.
3.
4.
6
Ok
Register your phone number(s)
This step enables you to dene the phone number(s) to which an
SMS is sent when the alarm is triggered. Only stored numbers can
control and congure the system.
Send “6”by SMS to the phone number of the SIM card in the
control panel. The control panel replies with a SMS containing
every phone number registered.
Copy and paste this SMS and edit it so to add your phone
number(s). Then send the SMS back to the control panel.
The control panel replies “Ok” as a conrmation.

In compliance with European laws. This product is in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC.
Manufactured in China.
Connect more accessories
On the control panel, type your access code (default code: 1234) followed
by the key : your control panel is now in Connection mode.
Within the next 15 seconds, trigger the accessory you wish to
connect (for a RFID tag, swipe it in front of the RFID reader of the
control panel). You hear one beep: the accessory is registered.
A piece of advice
Save time and register your accessories using the Connection
Assistant in the “Support” section of our website (www.etiger.com).
Change the access code
Do not forget to change your access code. To change your access
code, send “13” by SMS to the control panel.
Advanced setup
For more settings, please refer to the user manual of
the control panel, available for download on
www.etiger.com/eu/support
Advanced settings

Memo
by SMS
Arm the system 1
Disarm the system 0
Home Mode 2
System status 00
by phone call
Arm the system 1
Disarm the system
(stop the siren automatically) 0
Start audio surveillance
(stop the siren automatically) *
Start the conversation 3
Start the siren 9
Stop the siren 6
To enable the control by phone call, please refer to
the user manual available for download at
www.etiger.com
Memo
Detach it and keep it with you at all time
A piece of advice Save time and use our Android and iOS apps to interact with your control panel.
S3b-QSG-EN20151208-2.4-W
SIM card’s phone nb.
eTIGER Europe
18/C, Rue des Procureurs
7500 Tournai, Belgique
[e-mail]