EuroLite HL-BSW380 User manual

HL-BSW380 380W Beam/Spot/Wash
3in1 Moving Head Light
User manual
Thanks for choosing our goods please read this manual carefully before your operating

2
Contents
Introduction .................................................................. 3
Dimensions...................................................................4
Safety Information........................................................5
Using for the first time .................................................7
AC power......................................................................8
Data link .......................................................................8
Setup ............................................................................. 9
Menu chart....................................................................10
DMX Protocol&Channel Function .............................. 14
Service and maintenance..............................................19
Cleaning........................................................................ 20

3
Introduction
380W Beam Spot Wash 3 in 1 Moving head light
Voltage:AC100V-240V 50/60Hz
Power Consumption:500W
Light source:R17 371W
Color Temperature:3200K-8000K Linear Adjustment
Beam Angle: Beam0-1.5, Spot1.5°- 20° linear fast zooming.
Focus:High precision optical lens,electronic linear control
Linear Dimmer:Mechanical dimmer 0-100%
Color Wheel:13 fixed color+open,half-tone effect, linear color conversion, bi-
directionally rotatable at variable speeds and rainbow effect
Rotating Gobo:9rotating gobos+White,bi-directional rotatable and gobo shaking at
variable speeds
Fixed gobo: 14 interchangeable gobos +white, and bi-directionally rotatable and gobo
shaking at variable speeds
Prism:8+6facet circular prism (10°-20° zooming)
Dimmer:0-100% linear dimmer
Strobe:0.3-20times/second,double lens strobe with adjustable speed Pan and Tilt:
Smoothly,automatic Pan/Tilt position correction,speed adjustable Range:Pan540°,
Tilt 280°
Frost: 8°-60° washing
Effect:Color+Gobo+Prism+Strobe automatic operation function Cooling:Fan Cooling
Control mode:Standard DMX 512, 3 pin connector(5pin optional) Channel
mode:19/24
Display Interface:LCD screen both in Chinese and English
IP rate:IP20,Built-in overheat protection,triggered high voltage protection.
Glass Gobos: Outer diameter:12mm Inner diameter:12mm
Thickness:1.1mm
Static Gobo Wheel: Diameter:120mm
Water Ripple Gobos: Diameter:15.8mm Size:
400x280x660mm
Net Weight:20KG
Gross Weight:21KG(Carton)
Thickness:0.8mm
Thickness:3mm

4
Dimensions

5
Safety Information
WARNING!
Read the safety precautions in this section before
installing, powering, operating or servicing this
product.
The following symbols are used to identify important safety information on the product and in this manual:
DANGER!
DANGER!
Protection
WARNING!
WARNING!
WARNING!
WARNING!
Safety hazard.
Hazardous
from burn High brightness Burn hazard. Wear Refer to user
Risk of severe
voltage. Risk
and fire. light source, Hot surface. protective manual.
injury or death.
of lethal or
With risk of Do not touch. Eye wear.
severe electric
burned eyes.
shock.
Warning!
High brightness light source,don't look at the light directly so that keep the risk of burned eyes
away.
This product is for professional use only. It is not for household use.
, ■ \ This product presents risks of severe injury or death due to fire and burn hazards, electric shock and falls.
Read this manual before installing, powering or servicing the fixture, follow the safety precautions listed below and
observe all warnings in this manual and printed on the fixture.
If have any problem,please contact the supplier.

6
PROTECTION FROM ELECTRIC SHOCK
/, \ • Disconnect the fixture from AC power before removing or installing any cover or part and when not in
use.
•Always ground (earth) the fixture electrically.
•Use only a source of AC power that complies with local building and electrical codes and has both overload
and ground-fault (earth-fault) protection.
•Before using the fixture, check that all power distribution equipment and cables are in perfect condition and
rated for the current requirements of all connected devices.
•Power input and throughput cables must be rated 20 A minimum, have three conductors 1.5 mm2
(16 AWG) minimum conductor size and an outer cable diameter of 5 - 15 mm (0.2 - 0.6 in.). Cables must be
hard usage type (SJT or equivalent) and heat-resistant to 90° C (194° F) minimum. In the EU the Cable must
be HAR approved or equivalent.
•Use only Neutrik Powercon NAC3FCA cable connectors to connect to power input sockets. Use only
Neutrik Powercon NAC3FCB cable connectors to connect to power throughput sockets.
•Isolate the fixture from power immediately if the power plug or any seal, cover, cable, or other Component is
damaged, defective, deformed, wet or showing signs of overheating. Do not reapply power until repairs have
been completed.
•Do not expose the fixture to rain or moisture.
PROTECTION FROM BURNS AND FIRE
•Do not operate the fixture if the ambient temperature (Ta) exceeds 40° C (104° F).
•The exterior of the fixture becomes hot during use. Avoid contact by persons and materials. Allow the fixture
to cool for at least 10 minutes before handling.
•Keep all combustible materials (e.g. fabric, wood, paper) at least 100 mm (3.9 in.) away from the
fixture.
•Keep flammable materials well away from the fixture.
•Ensure that there is free and unobstructed airflow around the fixture.
•Do not expose the front glass to sunlight or other strong light sources from any angle.
•Do not illuminate surfaces within 200 mm (7.9 ins.) of this light.
•Do not attempt to bypass thermostatic switches or fuses.
• Do not stick filters, masks or other materials onto any optical component.
• Do not modify the fixture in any way not described in this manual

7
PROTECTION FROM INJURY
•When light up the fixture,please don't look at the optical lens with eyes directly.Besides, don't use the
camera light to point at the optical lens.
• Fasten the fixture securely to a fixed surface or structure when in use. The fixture is not portable when
installed.
• Ensure that any supporting structure and/or hardware used can hold at least 10 times the weight of all
the devices they support.
• Allow enough clearance around the head to ensure that it cannot collide with an object or another
fixture when it moves.
• Check that all external covers and rigging hardware are securely fastened.
• Block access below the work area and work from a stable platform whenever installing, servicing or
moving the fixture.
• Do not operate the fixture with missing or damaged covers, shields or any optical component.
Using for the first time
Important! After unpacking,please check the goods damage or not,which due to the
transportation. If you find damage, please do not use this item, then contact the dealer or
manufacturer as soon as possible.
•Please read the “Safety Information''before using the fixture.
• Check that the local AC mains power source is within the fixture's power voltage and
frequency ranges.
•Please make sure the fixture use in “Safety Information^ term.
AC power
Warning! Read “Safety Information" starting on page 5 before connecting this light to AC
mains power.
Warning! For protection from electric shock, this light must be grounded (earthed). The
power distribution circuit must be equipped with a fuse or circuit breaker and groundfault
(earth-fault) protection.

8
Warning! Socket outlets or external power switches used to supply this light with power must
be located near the fixture and easily accessible so that the fixtures can easily be disconnected
from power.
Important! Do not insert or remove live Neutrik PowerCon connectors to apply or cut power,
as this may cause arcing at the terminals and damage the connectors.
Important! Do not use an external dimming system to supply power to the 350BSW as this
may cause damage to the fixture that is not covered by the product warranty.
Power voltage
Warning! Check that the voltage range specified on the fixture's serial number label matches the local
AC mains power voltage before applying power to the fixture.
This light fixtures accept AC mains power at 100-240 V nominal, 50/60 Hz. Do not apply AC mains
power to the fixture at any other voltage than that specified on the fixture's serial number label.
Data link
A DMX 512 data link is required in order to control a 350BSW via DMX.
This light has 5-pin XLR connectors for DMX data input and output. The pin-out on all connectors is pin 1 = shield,
pin 2 = cold (-), and pin 3 = hot (+). Pins 4 and 5 in the 5-pin XLR connectors are not used in this light but are
available for possible additional data signals as required by the DMX512-A standard.
Standard pin-out is pin 4 = data 2 cold (-) and pin 5 = data 2 hot (+).
The number of fixtures is either limited to 256 or limited by the number of DMX channels required by the fixtures
in relation to the maximum 512 channels available in one DMX universe, whichever limit is lower. Note that if
independent control of a fixture is required, it must have its own DMX channels. Fixtures that are required to
behave identically can share the same DMX channels.
To add more fixtures or groups

9
Connecting the data link
Connecting the data link
To connect this light to data:
1. Connect the DMX data output from the controller to the closest this light male
5/3-pin XLR DMX input connector.
2. Connect the DMX output of the fixture closest to the controller to the DMX input
of the next fixture and
continue connecting fixtures output to input.
3. Terminate the last fixture on the link with a 120 Ohm resistor.
When this light turned on , the display screen and key button get flash
in every second once the fixture without the DMX signal.When insert
DMX signal,the display screen and key button stop flashing, it stand
for run into the DMX control mode. 20 seconds later,the display will
be in power save mode and the the key button indicator turn off.
Setup
Control panel and menu navigation
to see the working condition.
This light control center to
set the DMX. When you choose
O or©
viewmenus.
menu press ,
After finding your menu,Press
to enter
,quit
After out of menu,press

10
Menu chart :
Main Menu Sub Menu UP/DOWN
Lock Remark: Lock Display
08Tt
Remark:Display 180° invert
中
Remark: Language
中
EN
Setting
Run Mode
DMX
Sound
Random
DMX Address 001-512
Channel Mode
Std. 19CH
Ext. 24CH
Sound Regulator +003-- -003
Invert Pan
ON
OFF
Invert Tilt
ON
OFF
Pan-Tilt Encoder
ON
OFF
NO DMX Signal
KEEP
CLEA
Display
ON
OFF
Lamp On@Startup
ON
OFF
ScreenAutoRotation
ON
OFF
Load Default
OK
CANCEL