Eurotops Chronograph Coloris User manual

1
GB
Chronograph "Coloris"
Art. No.: 25613
INSTRUCTION MANUAL
LED Light: Press (A) once, the LED light will light up for 2-3 seconds.
You can change LED light color: Press A for 3 seconds, the LED light will change to other
color or flashing.
Display: Normal time display in hours, minutes and seconds with day of the week marked
below the day scale. Press and hold C once to read month and date. Automatically return
to normal time display on release of C. To read alarm time press and hold D. Automatic
return to normal time display on release of D.
Time and Date setting: Press B three times - The second will flash, then press C to set
seconds to
zero.
Press D - Minute will flash and press C to advance minutes
Press D again - hour will flash and press C to advance hours, 12 hours mode or 24 hours
model
can be selected when advancing hours.
Press D again - date will flash and press C to advance date.
Press D again - Month will flash and press C to advance month.
Press D again - day will flash and press C advance day.
Press B to finish setting.
Alarm Setting: Press B twice - hour will flash and press C to advance hours
Press D - minute will flash and press C to advance minutes.
Press B to finish setting.

2
Alarm setting On/Off: Hold C and press D for on/off (ALM)
Hourly Chime Setting: Hold D and press B to set On/Off.
7 days all appear = ON
7 days all disappear = OFF
Stopwatch: The stopwatch measures in minutes, seconds and 1/100 seconds.
For stopwatch function (1), time accumulating
Press B once (the display shows all zero)
Start/Stop-press C once
Reset –when the counter is stopped by pressed C, press D to reset. All counter will be
reset to zero.
For stopwatch function (2), split time (lap time)
Start- press C once
Whilst stopwatch is running, press D to freeze lapsed time, press D again to
resume recording time.
Reset - Once timing has been stopped by pressing C.
Press D again to reset.
Press B to return to normal time.
To change the battery of the LCD display:
1) Remove the case back
2) Replace the old battery with new battery. Battery type is CR2016
3) Screw back
4) Fix back the case back
To change the battery of the analogue watch:

3
1) Remove case back
2) Unscrew the 5 screws as shown
3) Replace old battery with new battery. Battery type is SR626 or 377
4) Screw back the 5 screws.
5) Fix back the case back.
DISPOSAL：
The packaging material is reusable. Dispose of the packaging in an environmental
friendly way by putting it in the appropriate recycle waste collection containers.
Dispose of the product and the batteries in view of the environment if you
want to separate. The device and the batteries must not be thrown in with
domestic waste. Take them to a recycling center for used electrical and
electronic devices. For more information you can consult your local
government. Remove batteries first.
Eurotops Versand GmbH
Elisabeth-Selbert-Straße 3
40764 Langenfeld, Germany
If technical support is needed, please call ...
in Germany 0180 . 530 63 63* or [email protected]
in Austria 01 . 230 60 43 12 or [email protected]
in Switzerland 044 . 28 36 125 or [email protected]
in the Netherlands 026 . 37 36 333 or [email protected]
in France 0892 . 700 470** or [email protected]
* 14 Cents/minute via German landline, max. 42 cents/minute via mobile phone network
**34 Cents/minute via French landline
A possible return of products should be addressed to the return address stated on your
invoice.
The manual only reflects the technical conditions available under printing. Any changes in

4
technology and equipment are reserved.
© 13.01.2015