Evertz 2432rx2-hdmi User manual

2432RX2-HDMI

Dual Path Serial Digital to HDMI Converter

User Manual

EVERTZ MICROSYSTEMS LTD.

5288 John Lucas Drive,

Burlington, Ontario,

Canada L7L 5Z9

Phone: +1 905-335-3700

Sales: [email protected] Fax: +1 905-335-3573

Tech Support: [email protected] Fax: +1 905-335-7571

Web Page: http://www.evertz.com

Version 1.0, December 2018

The material contained in this manual consists of information that is the property of Evertz Microsystems and is intended solely for

the use of purchasers of the 2432RX2-HDMI Series products. Evertz Microsystems expressly prohibits the use of this manual for

any purpose other than the operation of the device. Due to ongoing research and development, features and specifications in this

manual are subject to change without notice.

Ltd. Copies of this manual can be ordered from your Evertz dealer or from Evertz Microsystems.

This page left intentionally blank

INFORMATION TO USERS IN EUROPE

NOTE

CISPR 22 CLASS A DIGITAL DEVICE OR PERIPHERAL

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant

to the European Union EMC directive. These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with

the instruction manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

INFORMATION TO USERS IN THE U.S.A.

NOTE

FCC CLASS A DIGITAL DEVICE OR PERIPHERAL

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications. Operation of this equipment

in a residential area is likely to cause harmful interference in which case the user will be required to correct

the interference at his own expense.

WARNING

Changes or Modifications not expressly approved by Evertz Microsystems Ltd. could void the user’s

authority to operate the equipment.

Use of unshielded plugs or cables may cause radiation interference. Properly shielded interface cables

with the shield connected to the chassis ground of the device must be used.

This page left intentionally blank

2432RX2-HDMI

Dual Path Serial Digital to HDMI Converter

Revision 1.0 Page i

REVISION HISTORY

REVISION DESCRIPTION DATE

1.0

First Release

Dec 2018

Information contained in this manual is believed to be accurate and reliable. However, Evertz assumes no responsibility for the use thereof, nor for the rights of third

parties, which may be affected in any way by the use thereof. Any representations in this document concerning performance of Evertz products are for informational

use only and are not warranties of future performance, either expressed or implied. The only warranty offered by Evertz in relation to this product is the Evertz standard

limited warranty, stated in the sales contract or order confirmation form.

Although every attempt has been made to accurately describe the features, installation and operation of this product in this manual, no warranty is granted nor liability

assumed in relation to any errors or omissions unless specifically undertaken in the Evertz sales contract or order confirmation. Information contained in this manual is

periodically updated and changes will be incorporated into subsequent editions. If you encounter an error, please notify Evertz Customer Service department. Evertz