evertz 5782ENC-H264HD-IPASI User manual

5782ENC-H264HD-IPASI
Professional Contribution H.264 and MPEG-2 Encoder
User Manual
© Copyright 2015
EVERTZ MICROSYSTEMS LTD.
5292 John Lucas Drive
Burlington, Ontario
Canada L7L 5Z9
Phone: [phone]
Sales: [email protected] Fax: [phone]
Tech Support: [email protected] Fax: [phone]
Web Page: http://www.evertz.com
Version 1.0, October 2015
The material contained in this manual consists of information that is the property of Evertz Microsystems and is intended solely for the use of
purchasers of the 5782ENC-H264HD-IPASI series product. Evertz Microsystems expressly prohibits the use of this manual for any purpose other
than the operation of the 5782ENC-H264HD-IPASI series product. Due to on going research and development, features and specifications in this
manual are subject to change without notice.
All rights reserved. No part of this publication may be reproduced without the express written permission of Evertz Microsystems Ltd. Copies of
this manual can be ordered from your Evertz dealer or from Evertz Microsystems.

This page left intentionally blank

IMPORTANT SAFETY INSTRUCTIONS
The lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated “Dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (Servicing) instructions
in the literature accompanying the product.
•Read these instructions
•Keep these instructions.
•Heed all warnings.
•Follow all instructions.
•Do not use this apparatus near water
•Clean only with dry cloth.
•Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
•Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
•Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than other. A grounding-type plug has two blades and a third grounding prong.
The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
•Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles and the point where they exit from the apparatus.
•Only use attachments/accessories specified by the manufacturer
•Unplug this apparatus during lightning storms or when unused for long periods of time.
•Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC – SHOCK, DO NOT EXPOSE
THIS APPARATUS
TO RAIN OR MOISTURE
WARNING
DO NOT EXPOSE THIS EQUIPMENT TO DRIPPING OR SPLASHING AND ENSURE THAT NO
OBJECTS FILLED WITH LIQUIDS ARE PLACED ON THE EQUIPMENT
WARNING
TO COMPLETELY DISCONNECT THIS EQUIPMENT FROM THE AC MAINS, DISCONNECT THE
POWER SUPPLY CORD PLUG FROM THE AC RECEPTACLE
WARNING
THE MAINS PLUG OF THE POWER SUPPLY CORD SHALL REMAIN READILY OPERABLE

INFORMATION TO USERS IN EUROPE
NOTE
CISPR 22 CLASS A DIGITAL DEVICE OR PERIPHERAL
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to the European Union EMC directive. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
INFORMATION TO USERS IN THE U.S.A.
NOTE
FCC CLASS A DIGITAL DEVICE OR PERIPHERAL
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
WARNING
Changes or Modifications not expressly approved by Evertz Microsystems Ltd. could void the user’s
authority to operate the equipment.
Use of unshielded plugs or cables may cause radiation interference. Properly shielded interface cables
with the shield connected to the chassis ground of the device must be used.
EN60065
Safety
EN504192 2005
Waste electrical products should not be
disposed of with household waste.
Contact your Local Authority for recycling
advice
EN55103-1: 1996
Emission
EN55103-2: 1996
Immunity

5782ENC-H264HD-IPASI
Professional Contribution H.264 and MPEG-2 Encoder
Revision 1.0 Page - i
TABLE OF CONTENTS
1. OVERVIEW ...................................................................................................................................1
2. SPECIFICATIONS.........................................................................................................................3
2.1. SERIAL VIDEO INPUT SPECIFICATIONS...........................................................................3
2.2. VIDEO ASI OUTPUT STANDARDS .....................................................................................3
2.3. ETHERNET:..........................................................................................................................3
2.4. COMPRESSION AND ENCAPSULATION SPECIFICATIONS.............................................3
2.5. AUDIO SPECIFICATIONS....................................................................................................3
2.6. ANCILLARY SPECIFICATIONS...........................................................................................4
2.7. CONFIGURATION & MGMT.................................................................................................4
2.8. ELECTRICAL .......................................................................................................................4
2.9. PHYSICAL (NUMBER OF SLOTS) ......................................................................................4
3. GETTING STARTED.....................................................................................................................5
3.1. CONNECTING TO AN ETHERNET NETWORK...................................................................5
3.2. CARE AND HANDLING OF OPTICAL FIBER WHEN USING SFP MODULES ...................5
3.2.1. Handling and Connecting Fibers................................................................................5
3.3. HARDWARE INSTALLATION..............................................................................................6
3.3.1. Three Different Ways to Control and Configure the 5782ENC-H264HD-IPASI ..........6
3.3.2. Module Installation.....................................................................................................6
4. WEB INTERFACE.........................................................................................................................7
4.1. SYSTEM TAB.......................................................................................................................8
4.2. PRODUCT FEATURES ......................................................................................................11
4.3. INPUT AUDIO PROC CONTROL .......................................................................................12
4.4. ENCODERS MONITOR......................................................................................................12
4.5. CONTRIBUTION ENCODER..............................................................................................13
4.6. DOLBY METADATA CONTROL ........................................................................................18
4.7. SCTE 35 GPI ......................................................................................................................21
4.8. PRESET..............................................................................................................................22
4.9. FAULT................................................................................................................................23
4.10. VIDEO NOTIFY...................................................................................................................26
5. VISTALINK®PRO INTERFACE ..................................................................................................27
5.1. SYSTEM TAB.....................................................................................................................28
5.2. PRODUCT FEATURES TAB..............................................................................................31

5782ENC-H264HD-IPASI
Professional Contribution H.264 and MPEG-2 Encoder
Page - ii Revision 1.0
5.3. INPUT AUDIO PROC CONTROL TAB .............................................................................. 32
5.4. ENCODER MONITOR TAB................................................................................................33
5.5. CONTRIBUTION ENCODER TAB .....................................................................................34
5.6. DOLBY METADATA CONTROL TAB ............................................................................... 38
5.7. PRESET TAB.....................................................................................................................40
5.8. FAULT TAB .......................................................................................................................43
5.9. VIDEO NOTIFY..................................................................................................................44
6. UPGRADE PROCEDURES ........................................................................................................45
6.1. UPDATING VLPRO SERVER JAR FILE ...........................................................................45
6.2. FIRMWARE UPGRADE.....................................................................................................47
6.3. FIRMWARE UPGRADE USING WEBEASY®....................................................................47
6.4. FIRMWARE UPGRADE USING VISTALINK® WITH THE 570FC ...................................... 50

5782ENC-H264HD-IPASI
Professional Contribution H.264 and MPEG-2 Encoder
Revision 1.0 Page - iii
Figures
Figure 1-1: 5782ENC-H264HD-IPASI Block Diagram......................................................................................2
Figure 3-1: 5782ENC-H264-HD Rear Plate.....................................................................................................5
Figure 3-2: 570FR Chassis...............................................................................................................................6
Figure 4-1: WebEASY – Login Prompt.............................................................................................................7
Figure 4-2: WebEASY – Login Menu ...............................................................................................................7
Figure 4-3: WebEASY®– System Tab - Part 1 ................................................................................................8
Figure 4-4: WebEASY®– System Tab Part 2 ................................................................................................10
Figure 4-5: Illustration of BNC Outputs 1 and 2 .............................................................................................10
Figure 4-6: WebEASY – Product Features ....................................................................................................11
Figure 4-7: WebEASY – Input Audio Proc Control.........................................................................................12
Figure 4-8: WebEASY®– Encoders Monitor..................................................................................................12
Figure 4-9: WebEASY®– Contribution Encoder Part 1..................................................................................13
Figure 4-10: WebEASY®– Contribution Encoder Part 2................................................................................16
Figure 4-11: WebEASY®– Dolby Metadata Control ......................................................................................18
Figure 4-12: WebEASY®– SCTE 35 GPI ......................................................................................................21
Figure 4-13: WebEASY®– Preset..................................................................................................................22
Figure 4-14: WebEASY®– Fault Part 1..........................................................................................................23
Figure 4-15: WebEASY®– Fault Part 2..........................................................................................................24
Figure 4-16: WebEASY®– Video Notify.........................................................................................................26
Figure 5-1: VistaLINK® - System Tab .............................................................................................................28
Figure 5-2: Illustration of BNC Outputs 1 and 2 .............................................................................................29
Figure 5-3: VistaLINK® - Product Features Tab..............................................................................................31
Figure 5-4: VistaLINK® - Input Audio Proc Control Tab..................................................................................32
Figure 5-5: VistaLINK® - Encoder Monitor Tab...............................................................................................33
Figure 5-6: VistaLINK® - Contribution Encoder Tab Part 1.............................................................................34
Figure 5-7: VistaLINK® - Contribution Encoder Tab Part 2.............................................................................37
Figure 5-8: VistaLINK® - Dolby Metadata Control Tab ...................................................................................38
Figure 5-9: VistaLINK® - Preset Tab...............................................................................................................40
Figure 5-10: VistaLINK® - SNMP Trap Destinations Tab ...............................................................................41
Figure 5-11: VistaLINK® - SCTE 35 GPI Tab .................................................................................................42
Figure 5-12: VistaLINK® - Fault Tab ...............................................................................................................43
Figure 5-13: VistaLINK® - Video Notify...........................................................................................................44
Figure 6-1: VistaLINK®PRO Server...............................................................................................................45
Figure 6-2: VistaLINK®PRO – Applying JAR Updates ..................................................................................46
Figure 6-3: WebEASY® - Upgrade Button on Top Menu Bar .........................................................................47
Figure 6-4: WebEASY® - Firmware Upgrade Menu ......................................................................................48
Figure 6-5: WebEASY® - Firmware Upgrade Menu........................................................................................49
Figure 6-6: VistaLINK®- Selecting Version Information.................................................................................50
Figure 6-7: VistaLINK®- Selecting Card for Upgrade ....................................................................................51
Figure 6-8: Selecting File for Firmware Upgrade ...........................................................................................51

5782ENC-H264HD-IPASI
Professional Contribution H.264 and MPEG-2 Encoder
Page - iv Revision 1.0
This page left intentionally blank

5782ENC-H264HD-IPASI
Professional Contribution H.264 and MPEG-2 Encoder
Revision 1.0 Page - v
REVISION HISTORY
REVISION DESCRIPTION DATE
1.0 First Release Oct 2015
Information contained in this manual is believed to be accurate and reliable. However, Evertz assumes no responsibility for the use thereof
nor for the rights of third parties, which may be affected in any way by the use thereof. Any representations in this document concerning
performance of Evertz products are for informational use only and are not warranties of future performance, either expressed or implied. The
only warranty offered by Evertz in relation to this product is the Evertz standard limited warranty, stated in the sales contract or order
confirmation form.
Although every attempt has been made to accurately describe the features, installation and operation of this product in this manual, no
warranty is granted nor liability assumed in relation to any errors or omissions unless specifically undertaken in the Evertz sales contract or
order confirmation. Information contained in this manual is periodically updated and changes will be incorporated into subsequent editions. If
you encounter an error, please notify Evertz Customer Service department. Evertz reserves the right, without notice or liability, to make
changes in equipment design or specifications.

5782ENC-H264HD-IPASI
Professional Contribution H.264 and MPEG-2 Encoder
Page - vi Revision 1.0
This page left intentionally blank

5782ENC-H264HD-IPASI
Professional Contribution H.264 and MPEG-2 Encoder
Revision 1.0 Page - 1
1. OVERVIEW
The 5782ENC-H264HD-IPASI has been designed to deliver “best in breed” video and audio
compression technology to lead the contribution market space, offering the very best video quality,
latency and bandwidth utilization.
This flexible architecture offers both MPEG-2 and H.264 (MPEG-4 Part 10) user configurable video
compression at up to 10-Bit 4:2:2 resolution. Concurrently, with latencies as low as 250 ms end to end,
the 5782ENC becomes an ideal compression solution for low latency contribution requirements.
The 5782ENC-H264HD-IPASI supports audio encoding of up to 16 embedded channels using a wide
variety of audio compression cores including, but not limited to MPEG1L2, Dolby-E/AC-3, AAC and
audio pass-through.
The 5782ENC-H264HD-IPASI offers a built-in web server for quick and easy configuration, including
true SNMP control from the award winning VistaLINK® NMS when paired with a frame controller for
multiple control options. For those mission critical applications, the 5782ENC-H264HD-IPASI can be
intelligently managed using the Evertz Compression Systems Manager (CSM) software which offers
complete provisioning, monitoring and redundancy management of the contribution compression head
end.
The 5782ENC-H264HD-IPASI is fully feature upgradable in the field, allowing for a cost-effective
migration from a base platform capable of 420, H.264 or MPEG-2 ASI, up to a fully optioned platform
capable of 422 10b, H.264 or MPEG-2, ASI and/or IP. The 5782ENC-H264HD-IPASI offers the best
performance and versatility available from a world class contribution encoder.
Features & Benefits
•1X High quality H.264 or MPEG-2 encoder up to 4:2:2 10-bit
•2x HD/SD-SDI inputs
•Support for multiple audio codecs including AAC and Dolby
•Fully integrated with the industry leading VistaLINK® PRO System
•Compact one slot design compatible within any Evertz 3RU 570FR chassis
•Control and/or integrated HTTP interfaces via 570FC frame controller

5782ENC-H264HD-IPASI
Professional Contribution H.264 and MPEG-2 Encoder
Page - 2 Revision 1.0
Figure 1-1: 5782ENC-H264HD-IPASI Block Diagram

5782ENC-H264HD-IPASI
Professional Contribution H.264 and MPEG-2 Encoder
Revision 1.0 Page - 3
2. SPECIFICATIONS
2.1. SERIAL VIDEO INPUT SPECIFICATIONS
Standard: HD-SDI (SMPTE ST 292-1)
SD-SDI (SMPTE ST 259-C)
Video Resolution: 1920x1080 @ 25, 29.97
1280x720 @ 50, 59.94
720x576 @ 25Hz (ITU-R BT.656-4)
720x480 @ 29.97Hz (SMPTE 125M)
Number of Inputs: 2
Connectors: BNC IEC 61169-8 Annex A
Embedded Audio: SMPTE ST 272-A, ST 299-1
2.2. VIDEO ASI OUTPUT STANDARDS
Standard: ASI per DVB TR 101 891 (Max 80Mb/s)
Number of Outputs: 2
Connectors: BNC IEC 61169-8 Annex A
2.3. ETHERNET:
Data Ports: 2x GbE Data Ports (SFP Type)
2.4. COMPRESSION AND ENCAPSULATION SPECIFICATIONS
Encapsulation: UDP or RTP
FEC SMPTE-2022 (Optional)
SPTS
Video Compression: H.264 / MPEG-2 4:2:0 (Optional)
H.264 / MPEG-2 4:2:2 8bit (Optional)
H.264 / 4:2:2 10bit (Optional)
Profile/Level: MP@ML up to [email protected]
2.5. AUDIO SPECIFICATIONS
Number of Channels: 8x PIDs of audio processing across 16x Channels of Embedded PCM
Compression Formats: MPEG-1 Layer 2
Passthrough
PCM
Dolby Digital
Dolby-E
Optional: Dolby Digital AC-3 up to 3/2L
Dolby Digital Plus
Dolby-E Encode
AAC (LC, HE, v1, v2)

5782ENC-H264HD-IPASI
Professional Contribution H.264 and MPEG-2 Encoder
Page - 4 Revision 1.0
2.6. ANCILLARY SPECIFICATIONS
Embedding of: Audio Pass Through
Closed Caption / Teletext
AFD / WSS
Timecode
SMPTE 2038 (Optional)
2.7. CONFIGURATION & MGMT
Web Server: Integrated HTTP with full control using a 570FR via 570FC Frame
Controller
SNMP: VistaLINK remote control and monitoring via Frame Controller
2.8. ELECTRICAL
Input Voltage: Auto ranging 100 – 240VAC
Power: <48W
EMI/RFI: Complies with FCC regulations for class-A devices
Complies with EU EMC directive
2.9. PHYSICAL (NUMBER OF SLOTS)
570FR: 1

5782ENC-H264HD-IPASI
Professional Contribution H.264 and MPEG-2 Encoder
Revision 1.0 Page - 5
3. GETTING STARTED
The 5782ENC-H264HD-IPASI module comes with a companion rear plate that occupies one slot in the
frame. The module can be installed in a 570FR chassis.
Figure 3-1: 5782ENC-H264-HD Rear Plate
IN 1, 2: BNC connectors used to input HD/SD SDI with embedded audio.
OUTPUT 1: Selectable as Contribution encoder ASI output or HD/SD SDI input bypass.
OUTPUT 2: Selectable as Contribution encoder ASI output or HD/SD SDI input bypass.
DATA 1,2: There are two SFP cages for streaming output. RJ-45 SFPs can be provided for
Ethernet connection. Contribution and IPTV encoder can be output from both ports.
3.1. CONNECTING TO AN ETHERNET NETWORK
The 5782ENC-H264HD-IPASI is made possible using the 570FC frame controller. Please refer to the
570FR manual for making your network connections.
3.2. CARE AND HANDLING OF OPTICAL FIBER WHEN USING SFP MODULES
3.2.1. Handling and Connecting Fibers

Never touch the end face of an optical fiber. Always keep dust caps on optical
fiber connectors when not connected and always remember to properly clean the
optical end face of a connector before making a connection.
The transmission characteristics of the fiber are dependent on the shape of the optical core and
therefore care must be taken to prevent fiber damage due to heavy objects or abrupt fiber bending.
Evertz recommends that the user maintains a minimum bending radius of 5 cm to avoid fiber-bending
loss that will decrease the maximum attainable distance of the fiber cable. The Evertz fiber optic
modules come with cable lockout devices, to prevent the user from damaging the fiber by installing a
module into a slot in the frame that does not have a suitable I/O module.

5782ENC-H264HD-IPASI
Professional Contribution H.264 and MPEG-2 Encoder
Page - 6 Revision 1.0
3.3. HARDWARE INSTALLATION
3.3.1. Three Different Ways to Control and Configure the 5782ENC-H264HD-IPASI
There are two different ways that 5782ENC can be controlled and configured:
1. WebEASY®using the 570FC frame controller with 5782ENC-H264HD-IPASI installed in frame.
2. VistaLINK® using the 570FC frame controller with 5782ENC-H264HD-IPASI installed in frame.
3.3.2. Module Installation
Before handling the card it is important to minimize the potential effects of static electricity. It is
therefore recommended that an ESD strap be worn.
Locate on the 570FR frame chassis one adjacent vacant slot. Unpack the 5782ENC-H264-HD-IPASI
and separate the rear plate module from the main card. Locate on the rear of the rack the one slot and
remove the blanking panel. Insert the rear plate module into the back of the chassis and secure using
the two screws provided.
Figure 3-2: 570FR Chassis
Insert the 5782ENC-H264HD-IPASI card into the corresponding front slots ensuring the card lines up
with the slot runners on the bottom and the top of the chassis. Push the card into the slot ensuring that
when it mates with the rear card that is has been firmly pushed into a seated position. Use the thumb
screw to properly secure the module. Do not over tighten thumb screws.

5782ENC-H264HD-IPASI
Professional Contribution H.264 and MPEG-2 Encoder
Revision 1.0 Page - 7
4. WEB INTERFACE
After the 5782ENC and 570FC have been installed, the 5782ENC can be completely configured using
VLPro or the 570FC web interface. The web interface will be discussed below. Simply type in the IP
address of the 570FC module in the web browser.
For Login and Password, type in “root” and “evertz”.
Note: Computer must be on the same network in order to have communication with 570FC
Frame controller. For quick setup confirmation, try connecting back to back from your computer
to the 570FC and confirm the IP addresses are in the same subnet.
Figure 4-1: WebEASY – Login Prompt
Once logged in, the 570FC main menu will appear. Select the 5782ENC-H264HD-IPASI for configuring.
Figure 4-2: WebEASY – Login Menu

Due to the size of the certain menu tabs, we will be breaking up screen tab images
into multiple images.
Some of the screen shots will also require the user to zoom in
to see the image more clearly.

5782ENC-H264HD-IPASI
Professional Contribution H.264 and MPEG-2 Encoder
Page - 8 Revision 1.0
4.1. SYSTEM TAB
Figure 4-3: WebEASY®– System Tab - Part 1

Note: For IP address settings on Control and Data ports, after applying any changes,
the device must be rebooted for the changes to take. Reboot can be pressed at the
bottom of this System tab after all changes are made.
Firmware Version
Firmware Version: This monitor displays the current firmware version.
Control Port (for future implementation)
Data Port Control (must reboot in order for settings new to take effect)
For Port 1 and Port 2
IP Address: This control allows the user to set the IP address on the Data Port. This control will
also display the currently set IP address.

5782ENC-H264HD-IPASI
Professional Contribution H.264 and MPEG-2 Encoder
Revision 1.0 Page - 9
Netmask: This control allows the user to set the Netmask for the Data Port IP address. This control
will also display the currently set Netmask.
Gateway: This control allows the user to set the Gateway for the Data Port. This control will also
display the currently set Gateway address.
Syslog Configuration:
Syslog is a valuable tool for debugging the device operation. It is essentially serial readouts over IP,
sent to a dedicated server. If issues are present, Evertz can help install and setup a syslog server for
constant monitoring of the device activity.
External Syslog: This parameter allows the user to enable or disable sending syslog information to
the configured external server.
Syslog Server IP: This parameter allows the user to assign the external syslog server IP address.
This will be the address of a PC with the syslog server software installed (ex Kiwi Syslog Server).
Data Port Monitor
For Data Port 1 and Data Port 2
SFP Part Number: This parameter returns the part number of the SFP located in the Data Port.
Link Status: This parameter returns the link status for the Data Port. The status could be either Up or
Down.
Link Info: When the link is Up, this parameter returns link speed & duplex mode information for Data
Port.
Receive Bandwidth: When the link is Up, this parameter returns the receive bandwidth currently
being read on the Data Port. Reading is in kbps.
Transmit Bandwidth: When the link is Up, this parameter returns the transmit bandwidth currently
being sent on the Data Port. Reading is kbps.

5782ENC-H264HD-IPASI
Professional Contribution H.264 and MPEG-2 Encoder
Page - 10 Revision 1.0
Figure 4-4: WebEASY®– System Tab Part 2
Output Port Mux Select
Figure 4-5: Illustration of BNC Outputs 1 and 2
BNC 2 Output (OUT 1) and BNC 4 Output (OUT 2): This parameter allows the user to select the
BNC output type. Options are:
•Contribution encoder ASI
•V-Proc (video processor) HD/SD-SDI Loopout
(HD/SDI-Loopout will forward the currently selected input).
Encoders Control
Encoder SDI Input: 5782ENC-H264HD-IPASI has two HD/SD SDI input interfaces. This parameter
is used to select the SDI input for the video encoder and all audio encoders.
Note: Only one input is used for the main feed.
Temperature
Temperature Monitor 1: This displays the temperature of the module.