evertz 570J2K-HW-X19 User manual

570J2K-HW-X19
Multi Channel J2K Encoder-Decoder
User Manual
© Copyright 2017
EVERTZ MICROSYSTEMS LTD.
5288 John Lucas Drive
Burlington, Ontario
Canada L7L 5Z9
Phone: [phone]
Sales: [e-mail] Fax: [phone]
Tech Support: [e-mail] Fax: [phone]
Web Page: http://www.evertz.com
Version 1.0, February 2017
The material contained in this manual consists of information that is the property of Evertz Microsystems and is intended solely for the use of
purchasers of the 570J2K product. Evertz Microsystems expressly prohibits the use of this manual for any purpose other than the operation of the
570J2K product. Due to on going research and development, features and specifications in this manual are subject to change without notice.
All rights reserved. No part of this publication may be reproduced without the express written permission of Evertz Microsystems Ltd. Copies of
this manual can be ordered from your Evertz dealer or from Evertz Microsystems.

This page left intentionally blank

IMPORTANT SAFETY INSTRUCTIONS
The lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated “Dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (Servicing) instructions
in the literature accompanying the product.
•Read these instructions
•Keep these instructions.
•Heed all warnings.
•Follow all instructions.
•Do not use this apparatus near water
•Clean only with dry cloth.
•Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
•Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
•Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than other. A grounding-type plug has two blades and a third grounding prong.
The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
•Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles and the point where they exit from the apparatus.
•Only use attachments/accessories specified by the manufacturer
•Unplug this apparatus during lightning storms or when unused for long periods of time.
•Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC –
SHOCK, DO NOT EXPOSE THIS APPARATUS
TO RAIN OR MOISTURE
WARNING
DO NOT EXPOSE THIS EQUIPMENT TO DRIPPING OR SPLASHING AND ENSURE THAT NO
OBJECTS FILLED WITH LIQUIDS ARE PLACED ON THE EQUIPMENT
WARNING
TO COMPLETELY DISCONNECT THIS EQUIPMENT FROM THE AC MAINS, DISCONNECT THE
POWER SUPPLY CORD PLUG FROM THE AC RECEPTACLE
WARNING
THE MAINS PLUG OF THE POWER SUPPLY CORD SHALL REMAIN READILY OPERABLE

INFORMATION TO USERS IN EUROPE
NOTE
CISPR 22 CLASS A DIGITAL DEVICE OR PERIPHERAL
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to the European Union EMC directive. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
INFORMATION TO USERS IN THE U.S.A.
NOTE
FCC CLASS A DIGITAL DEVICE OR PERIPHERAL
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
WARNING
Changes or Modifications not expressly approved by Evertz Microsystems Ltd. could void the user’s
authority to operate the equipment.
Use of unshielded plugs or cables may cause radiation interference. Properly shielded interface cables
with the shield connected to the chassis ground of the device must be used.
EN60065
Safety
EN504192 2005
Waste electrical products should not be
disposed of with household waste. Contact
your Local Authority for recycling advice
EN55103-1: 1996
Emission
EN55103-2: 1996
Immunity

570J2K-HW-X19
Multi channel J2K Encoder-Decoder
Revision 1.0 Page - i
TABLE OF CONTENTS
1. OVERVIEW ...................................................................................................................................1
2. GETTING STARTED.....................................................................................................................3
2.1. REAR PLATE .......................................................................................................................4
2.2. CARE AND HANDLING OF OPTICAL FIBER......................................................................4
2.3. HARDWARE INSTALLATION..............................................................................................5
2.4.1 CONNECTION VIA FC PROXY ............................................................................................5
3. SPECIFICATIONS.........................................................................................................................7
3.1. SERIAL DIGITAL VIDEO......................................................................................................7
3.2. SERIAL VIEDO INPUTS.......................................................................................................7
3.3. IP INPUT...............................................................................................................................7
3.4. SERIAL VIDEO OUTPUT .....................................................................................................7
3.5. IP OUTPUT...........................................................................................................................7
3.6. EMBEDDING OF HANC & VANC.........................................................................................7
3.7. ELECTRICAL .......................................................................................................................7
3.8. PHYSICAL............................................................................................................................7
3.9. ENCLOSURES .....................................................................................................................8
3.10. ORDERING INFORMATION.................................................................................................8
4. 570J2K-HW-X19 APPLICATION BASED FIRMWARE.................................................................9
5. 570J2K-HW-X19 APP A “ENCODER” WEB INTERFACE .........................................................11
5.1. SYSTEM .............................................................................................................................13
5.1.1. System ....................................................................................................................13
5.1.2. Control Port Configuration .......................................................................................13
5.1.3. Data Port Configuration ...........................................................................................13
5.1.4. Data Port Monitor.....................................................................................................14
5.1.5. Temperature Monitor ...............................................................................................15
5.1.6. Card Control............................................................................................................15
5.2. PRODUCT FEATURES ......................................................................................................16
5.2.1. License Control........................................................................................................16
5.2.2. Product Features Supported....................................................................................16
5.3. SDI INPUT CONTROL........................................................................................................17
5.3.1. Input Status .............................................................................................................17
5.4. IP OUTPUT CONTROL.......................................................................................................18
5.4.1. Configuration...........................................................................................................18
5.4.2. IP Output Control.....................................................................................................18
5.4.3. IP Output Advanced Control ....................................................................................19

570J2K-HW-X19
Multi channel J2K Encoder-Decoder
Page - ii Revision 1.0
5.5. IP INPUT CONTROL..........................................................................................................19
5.5.1. Input Control ...........................................................................................................20
5.5.2. Input Port Control....................................................................................................20
5.5.3. Input SFP Port Selection.........................................................................................20
5.5.4. IP Input Advanced Control ......................................................................................21
5.5.5. ARP Control............................................................................................................21
5.6. ENCODER CONTROL.......................................................................................................21
5.6.1. Encoder Configuration ............................................................................................21
5.6.2. Encoder Audio Output Control ................................................................................22
5.6.3. Program Description Control...................................................................................23
5.6.4. Compliance.............................................................................................................23
5.6.5. Encoder Control......................................................................................................23
5.7. IP INPUT MONITOR...........................................................................................................24
5.7.1. Input Stream ...........................................................................................................24
5.7.2. Input IP Packet Monitor...........................................................................................24
5.8. SYSTEM NOTIFY...............................................................................................................25
5.8.1. System Monitoring Control......................................................................................25
5.8.2. System Notify..........................................................................................................25
5.9. INPUT NOTIFY...................................................................................................................26
5.9.1. Encoder Input Notification.......................................................................................26
6. 570J2K-HW-X19 APP B “DECODER” WEB INTERFACE......................................................... 27
6.1. SYSTEM.............................................................................................................................29
6.1.1. System....................................................................................................................29
6.1.2. Control Port Configuration.......................................................................................29
6.1.3. Data Port Configuration...........................................................................................29
6.1.4. Data Port Monitor....................................................................................................30
6.1.5. Temperature Monitor:..............................................................................................31
6.1.6. Card Control............................................................................................................31
6.2. PRODUCT FEATURES......................................................................................................32
6.2.1. License Control.......................................................................................................32
6.2.2. Product Features Supported...................................................................................32
6.3. SDI INPUT CONTROL .......................................................................................................33
6.3.1. Input Status.............................................................................................................33
6.4. SDI OUTPUT CONTROL ...................................................................................................34
6.4.1. Output Control.........................................................................................................34
6.4.2. Genlock...................................................................................................................34
6.4.3. Phase Adjustment...................................................................................................35
6.5. IP OUTPUT CONTROL......................................................................................................35
6.5.1. Configuration...........................................................................................................36
6.5.2. IP Output Control....................................................................................................36
6.5.3. IP Output Advanced Control....................................................................................36
6.6. IP INPUT CONTROL..........................................................................................................36
6.6.1. Input Control ...........................................................................................................37
6.6.2. Input Port Control....................................................................................................37
6.6.3. Input SFP Port Selection.........................................................................................38
6.6.4. IP Input Advanced Control ......................................................................................38

570J2K-HW-X19
Multi channel J2K Encoder-Decoder
Revision 1.0 Page - iii
6.6.5. ARP Control.............................................................................................................38
6.7. DECODER CONTROL........................................................................................................38
6.7.1. Rx Input Monitor ......................................................................................................39
6.7.2. Decoder Input Program Control...............................................................................39
6.7.3. Manual PID Control .................................................................................................40
6.7.4. MPPM Control .........................................................................................................42
6.8. IP INPUT MONITOR...........................................................................................................43
6.8.1. Input Stream............................................................................................................44
6.8.2. Input Stream Internal Decoder Core ........................................................................44
6.8.3. Input IP Packet Monitor............................................................................................44
6.9. DECODER PROGRAM MONITOR.....................................................................................45
6.9.1. Rx Program Monitor.................................................................................................45
6.9.2. Program Video Monitor............................................................................................45
6.10. SYSTEM NOTIFY ...............................................................................................................46
6.10.1. System Monitoring Control.......................................................................................46
6.10.2. System Notify ..........................................................................................................46
6.11. DECODER NOTIFY ............................................................................................................47
7. UPGRADE PROCEDURES.........................................................................................................49
7.1. FIRMWARE UPGRADE......................................................................................................49

570J2K-HW-X19
Multi channel J2K Encoder-Decoder
Page - iv Revision 1.0
Figures
Figure 1-1 : 570J2K-HW-X19 Block Diagram .................................................................................................. 2
Figure 2-1 : 570J2K-HW-X19 Rear Plate and Front Plate Layout................................................................... 3
Figure 2-2 : 570FC Proxy Address................................................................................................................... 5
Figure 5-1 : WebEASY® - Login Menu ........................................................................................................... 11
Figure 5-2 : 570J2K-HW-X19 Main Menu...................................................................................................... 12
Figure 5-3 : WebEASY® - System Tab (Part 1).............................................................................................. 13
Figure 5-4 : WebEASY® - System Tab (Part 2).............................................................................................. 14
Figure 5-5 : WebEASY® - System Tab (Part 3).............................................................................................. 15
Figure 5-7 : WebEASY® - Product Features Tab........................................................................................... 16
Figure 5-8 : WebEASY® - SDI Input Control Tab........................................................................................... 17
Figure 5-9 : WebEASY® - IP Output Control Tab........................................................................................... 18
Figure 5-10 : WebEASY® - IP Input Control Tab (Part 1)............................................................................... 19
Figure 5-11 : WebEASY® - IP Input Control Tab (Part 2)............................................................................... 20
Figure 5-12 : WebEASY® - Encoder Control Tab (Part 1).............................................................................. 21
Figure 5-13 : WebEASY® - Encoder Control tab (Part 2)............................................................................... 23
Figure 5-14 : WebEASY® - IP Input Monitor Tab ........................................................................................... 24
Figure 5-15 : WebEASY® - System Notify Tab............................................................................................... 25
Figure 5-16 : WebEASY® - Input Notify tab.................................................................................................... 26
Figure 6-1 : WebEASY® - Login Menu ........................................................................................................... 27
Figure 6-2 : 570J2K-HW-X19 Main Menu...................................................................................................... 28
Figure 6-3 : WebEASY® - System Tab (Part 1).............................................................................................. 29
Figure 6-4 : WebEASY® - System Tab (Part 2).............................................................................................. 30
Figure 6-5 : WebEASY® - System Tab (Part 3).............................................................................................. 31
Figure 6-6 : WebEASY® - Product Features Tab........................................................................................... 32
Figure 6-7 : WebEASY® - SDI Input Control Tab........................................................................................... 33
Figure 6-8 : WebEASY® - SDI Output Control Tab ........................................................................................ 34
Figure 6-9 : WebEASY® - IP Output Control Tab........................................................................................... 35
Figure 6-10 : WebEASY® - IP Input Control Tab............................................................................................ 36
Figure 6-11 : WebEASY® - IP Input Control Tab Continued .......................................................................... 37
Figure 6-12 : WebEASY® - Decoder Control Tab (Part 1).............................................................................. 38
Figure 6-13 : WebEASY® - Decoder Control Tab (Part 2).............................................................................. 41
Figure 6-14 : WebEASY® - Decoder Control Tab (Part 3).............................................................................. 42
Figure 6-15 : WebEASY® - IP Input Monitor Tab ........................................................................................... 43
Figure 6-16 : WebEASY® - Decoder Program Monitor Tab ........................................................................... 45
Figure 6-17 : WebEASY® - System Notify Tab............................................................................................... 46
Figure 6-18 : WebEASY® - Input Notify Tab................................................................................................... 47
Figure 7-1 : WebEASY® - Upgrade Button on Top Menu Bar........................................................................ 49
Figure 7-2 : WebEASY® - Firmware Upgrade Menu...................................................................................... 49
Figure 7-3 : WebEASY® - Firmware Upgrade Menu...................................................................................... 50

570J2K-HW-X19
Multi channel J2K Encoder-Decoder
Revision 1.0 Page - v
REVISION HISTORY
REVISION
DESCRIPTION
DATE
1.0
First Release
Feb 2017
Information contained in this manual is believed to be accurate and reliable. However, Evertz assumes no responsibility for the use thereof nor
for the rights of third parties, which may be affected in any way by the use thereof. Any representations in this document concerning
performance of Evertz products are for informational use only and are not warranties of future performance, either expressed or implied. The
only warranty offered by Evertz in relation to this product is the Evertz standard limited warranty, stated in the sales contract or order
confirmation form.
Although every attempt has been made to accurately describe the features, installation and operation of this product in this manual, no
warranty is granted nor liability assumed in relation to any errors or omissions unless specifically undertaken in the Evertz sales contract or
order confirmation. Information contained in this manual is periodically updated and changes will be incorporated into subsequent editions. If
you encounter an error, please notify Evertz Customer Service department. Evertz reserves the right, without notice or liability, to make
changes in equipment design or specifications.

570J2K-HW-X19
Multi channel J2K Encoder-Decoder
Page - vi Revision 1.0
This page left intentionally blank

570J2K-HW-X19
Multi channel J2K Encoder-Decoder
Revision 1.0 Page - 1
1. OVERVIEW
The 570J2K-HW-X19 is the optimal multi channel J2K encoding and decoding platform.
With direct conversion of up to 12 signals to direct mezzanine compression via JPEG2000, the
570J2K-HW-X19 series delivers unparallel processing density. Equipped with Advanced Encryption
Standard (AES 128), the 570J2K-HW-X19 provides industry leading encryption.
The exceptional density of the 570J2K-HW-X19 supports up to 12 channels of 3G, HD/SDI, SD/SDI or
up to 3 channels of UHD JPEG2000 encoding. The 570J2K-HW-X19 will support up to 9 channels of
3G, HD/SDI, SD/SDI JPEG2000 or 2 channels of UHD JPEG2000 decoding.
The 570J2K-HW-X19 features Evertz 4th generation ultra low latency, high density JPEG2000 codec
technology over multiple 10G or user configurable 1GE Ethernet.
The 570J2K-HW-X19 will provide auto-timing time stamped Ethernet outputs, multi-resolution
JPEG2000 streaming outputs and incorporates patent pending multi-path, multi-flow packet merge
base network bit error resilience for 100% QoS.
The 570J2K-HW-X19 can be managed via integrated HTTP web interfaces as well as SNMP
management via Frame Controller.
Features & Benefits
•Up to 12x3G/HD/SD or 3xUHD JPEG2000 Encodes
•Up to 9x3G/HD/SD or 2xUHD JPEG2000 Decodes
•Standards supported: 3480x2160p/59.94, 3480x2160p/50, 1080p/59.94, 1080p/50, 1080i/59.94,
1080i/50, 720p/59.94, 720p/50, 525i/59.94 and 625i/50
Mezzanine Encode Processing and encapsulation over IP:
•Video JPEG2000 encoded to native resolution
•4x groups of audio encapsulation
•Full VANC encapsulation & passthrough
Mezzanine Decode Processing
•Video JPEG2000 decode from native resolution
•4x groups of audio de-capsulated
•Full VANC de-encapsulation and embedding on SDI outputs
Control and Baseband Processing
•Modules support over frame controller or direct Ethernet interface
•SNMP control from Vistalink or Magnum Unified Control

570J2K-HW-X19
Multi channel J2K Encoder-Decoder
Page - 2 Revision 1.0
Figure 1-1 : 570J2K-HW-X19 Block Diagram

570J2K-HW-X19
Multi channel J2K Encoder-Decoder
Revision 1.0 Page - 3
2. GETTING STARTED
The 570J2K-HW-X19 modules come with a companion rear plate and occupy two slots in 570FR. Refer
to Figure 2-1 for 570J2K-HW-X19 Rear and Front plate layout.
Figure 2-1 : 570J2K-HW-X19 Rear Plate and Front Plate Layout.

570J2K-HW-X19
Multi channel J2K Encoder-Decoder
Page - 4 Revision 1.0
2.1. REAR PLATE
The rear plate of 570J2K-HW-X19 is equipped with 20 Mini-Din connectors. When using the module as
an encoder, mini dins 1-12 are used for the encoder input sources.
When 570J2K-HW-X19 is being used as a decoder, mini din 1-9 are used for decoder SDI outputs.
The front plate of 570J2K-HW-X19 has 12 available SFP slots. These SFP slots can be populated with
SFP10G-TR13-A. This will allow 10G interface to the 570J2K-HW-X19 Encoder and Decoder. Note that
up to 4 x 10G interfaces or 4 X SFP10G-TR13-A are supported.
2.2. CARE AND HANDLING OF OPTICAL FIBER
The transmission characteristics of the fiber are dependent on the shape of the optical core and
therefore care must be taken to prevent fiber damage due to heavy objects or abrupt fiber bending.
Evertz recommends that the user maintains a minimum bending radius of 5 cm to avoid fiber-bending
loss that will decrease the maximum attainable distance of the fiber cable. The Evertz fiber optic
modules come with cable lockout devices, to prevent the user from damaging the fiber by installing a
module into a slot in the frame that does not have a suitable I/O module.

Never touch the end face of an optical fiber. Always keep dust caps on optical
fiber connectors when not connected and always remember to properly clean the
optical end face of a connector before making a connection.

570J2K-HW-X19
Multi channel J2K Encoder-Decoder
Revision 1.0 Page - 5
2.3. HARDWARE INSTALLATION
To successfully install the 570J2K-HW-X19, the following is required:
1. 570 Series Frame
2. 570 Frame Controller
3. WebEASY® using the 570FC frame controller with 570J2K-HW-X19 installed in frame.
Before handling the card it is important to minimize the potential effects of static electricity. It is
therefore recommended that an ESD strap be worn.
Locate on the chassis 2 adjacent vacant slots. Unpack the 570J2K-HW-X19 and separate the rear
panel from the main card. Locate on the rear of the rack the two slots and remove the blanking panels.
Insert the rear panel into the back of the chassis and secure using the four screws provided.
Now insert the 570J2K-HW-X19 card into the corresponding front slots ensuring the card lines up with
the slot runners on the bottom and the top of the chassis. Push the card firmly into the slot ensuring
that when it mates with the rear card it has been firmly pushed into a seated position. Do not connect
any cables to the rear card (failure to do this could cause unwanted network issues) until the initial
configuration has been completed.
This procedure can be completed to all the other modules and is hot swappable allowing for the frame
to be powered on while installing.
2.4.1 CONNECTION VIA FC PROXY
The control of the 570J2K-HW-X19 can be done through FC Proxy. To configure a FC Proxy address
for the 570J2K-HW-X19, log into the 570FC webpage using “root” and “evertz” for the username and
password respectively. Navigate to the slot that houses the 570J2K-HW-X19 and enable the Proxy
Mode Address. Configure the Address, Netmask and Gateway for the required Control Connection.
Note the Proxy address must be configured for the second slot that 570J2K-HW-X19 occupies (i.e. if it
is placed in slot 2 and 3, configure proxy address for slot 3).
Figure 2-2 : 570FC Proxy Address

570J2K-HW-X19
Multi channel J2K Encoder-Decoder
Page - 6 Revision 1.0
This page left intentionally blank

570J2K-HW-X19
Multi channel J2K Encoder-Decoder
Revision 1.0 Page - 7
3. SPECIFICATIONS
3.1. SERIAL DIGITAL VIDEO
Standards:
•SMPTE 424M (3Gb/s)
•SMPTE 292M (1.5Gb/s)
•SMPTE 259M (270Mb/s)
•SMPTE 2022-6
3.2. SERIAL VIEDO INPUTS
Number of Inputs: 12 SDI
Connector DIN
3.3. IP INPUT
Number of Inputs 12 SDI over 4 x 10G input interfaces
Connector 4 x SFP10G-TR13-A
3.4. SERIAL VIDEO OUTPUT
Number of Outputs 9 SDI
Rise and Fall Time Per SMPTE spec
3.5. IP OUTPUT
Ethernet Interface 4 x 1GE/10GE SFP/SFP+ SMPTE 2022-6
Encapsulation MPEG2 TS over IP
Ethernet/IP Signalling Multicast IGMP V2/V3 (SSM Support)
3.6. EMBEDDING OF HANC & VANC
•4x Groups Audio Pass through per encoder
•All type of VANC data pass through
3.7. ELECTRICAL
Power 90W
Voltage 12VDC
EMI/RFI Complies with FCC Part 15, Class AEU EMC directive
3.8. PHYSICAL
Number of slots: 2

570J2K-HW-X19
Multi channel J2K Encoder-Decoder
Page - 8 Revision 1.0
3.9. ENCLOSURES
570FR 3RU chassis
S570FR 1RU chassis
3.10. ORDERING INFORMATION
570J2K-HW-X19 Enhanced logic capacity 570FR hardware module acting as a bulk J2K
encoder/decoder (encoder licenses sold separately), 12 J2K Encodes/ 9
J2K Decodes and up to 4x10GE interfaces using SFP+ cages (SFPs sold
separately)
Ordering Options:
SFP Modules:
•SFP10G-TR13-A 10GE optical SFP+
Licensing Options:
•570IPG-X19-CK-J2KP60 3G/HD/SD JPEG 2000 Encoder or Decoder license for
570IPG- HW-X19

570J2K-HW-X19
Multi channel J2K Encoder-Decoder
Revision 1.0 Page - 9
4. 570J2K-HW-X19 APPLICATION BASED FIRMWARE
The 570J2K-HW-X19 can be loaded with two different application based firmware builds. App A is the
encoder application that will allow the 570J2K-HW-X19 to function as an encoder, supporting up to 12
J2K encodes. App B is the decoder application that will allow the 570J2K-HW-X19 to function as a
decoder, supporting up to 9 J2K decodes. The manual will first focus on App A related controls and
configurations. It will then proceed with APP B related controls and configurations.

570J2K-HW-X19
Multi channel J2K Encoder-Decoder
Page - 10 Revision 1.0
This page left intentionally blank