Evo-lite MOVING WASH 36x8Z User manual

MOVING WASH 36x8Z
36x RGBW QUAD 8W LED
User manual

WARNING !
Before use, and before installing this fixture, read carefully user manual, and follow the
safety precautions listed on this page.
WARNING !
Very high level light output. DO NOT LOOK INTO THE BEAM.
DANGER !
Hazardous voltage. Risk of electric shock!
ALWAYS disconnect the fixture from power for servicing, for cleaning or installing.
Do not connect this unit on a dimmer power pack.
Protect the unit from rain or moisture.
WARNING !
Burn Hazard. Do not touch. Very hot surface
The fixture becomes hot during use and remains hot 10 min after use . Do not touch the unit.
WARNING !
Fire Hazard!
Keep flammable materials away from the fixture. Do not operate the fixture with ambient
temperature over 40°C.
.

DANGER !
Safety Hazard. Risk of injury.
This evolite unit must be installed by professional people. If suspended, make sure the
structure and the hardware used for this suspension is secured. This Hardware must support
at least 10 times the weight of the device suspended.
Ensure public is not looking at the beam. Do not try to repair the fixture by yourself. Contact
a professional repair service.

Introduction
Thank you for selecting this professional fixture from evolite
This new intelligent Moving Wash will provide you reliability, latest features,
and professional lighting effects for a long period of time.
This evolite fixture is complying with European standards: EN60598-
1:2008+A11:2009 EN60598-2-17:1989+A2:1991 et RoHs.
Device Description
> 11 channel DMX-512 .
> Pan :630°/tilt:180°.
> Variable electronic strobe.
> Variable electronic dimmer(0-100%).
> LED display menu with invert.
> Reset to factory settings option.
> Pan/tilt invert option.
> Fan cooled.
Installation
oRigging
The installation of the projector has to be built and constructed in a way that it can hold 10 times the
weight for 1 hour without any harming deformation.
IMPORTANT! OVERHEAD RIGGING REQUIRES EXTENSIVE EXPERIENCE, including calculating working
load limits, installation material being used, and periodic safety inspection of all installation material
and the projector. If you lack these qualifications, do not attempt the installation yourself, but instead
use a professional structural rigger. Improper installation can result in bodily injury and or damage to
property. The projector had to be installed out of the reach of people
Always secure your fixture with a safety cable !

oDMX 512 Connection
The wires must not come into contact with each other, otherwise the fixture will not work at all or
properly. Please note the starting address depends upon which controller is being used. Only use a
DMX cable and 3-pin XLR-plugs and connectors in order to connect the controller with the fixture or
one fixture to another
Connection with the mains.
The earth has to be connected. The device must only be connected with an electric installation
carried out in compliance with IEC standards.

DM X-pr ot ocol
11 DMX channel mode
Channel
Value
Function
1
0-255
Dimmer
0~100% dimmer
2
0-255
Red
0-100% Red
3
0-255
Green
0-100% Green
4
0-255
Blue
0-100% Blue
5
0-255
White
0-100% White
6
0-255
Customs dimmer
7
0-255
Pan
Pan movement 0~540
8
0-255
Tilt
Tilt movement 0~270
9
0-255
Pan Fine
Pan fine movement 0~540
10
0-255
Tilt Fine
Tilt fine movement 0~270
11
0-255
Pan Tilt speed
Pan & Tilt speed adjustment
12
0-255
Zoom
From 18 degree to 55 degree zoom
13
0
1-255
Strobe
No function
Strobe with increasing speed
14
0
1-25
26-50
51-90
91-130
131-170
171-210
211-250
251-255
Built in effect
Switch off ID effect
Fade delay open
Fade delay close
Select built color on
Color change in pulse
Color change
Color change in fade
Built in mode 1
Sound mode
15
0
1-20
21-40
41-60
61-80
81-100
101-120
121-140
141-160
161-170
171-200
201-205
206-210
211-215
216-220
Build in Color
Running this channel need channel 14 at 91-210
No function
R255 G↑B0 W0
R↓G255 B0 W0
R0 G255 B↑W0
R0 G↓B255 W0
R↑G0 B255 W0
R255 G0 B↓W0
R255 G↑B↑W0
R↓G↓B255 W0
R255 G255 B255 W255
R0 G0 B0 W0
R242 G204 B5 W227
R242 G215 B5 W227
R255 G255 B50 W255

221-215
226-230
231-235
236-240
241-245
246-250
251-255
R255 G255 B90 W255
R255 G255 B118 W255
R255 G255 B132 W255
R255 G255 B151 W255
R255 G255 B171 W255
R255 G255 B185 W255
R255 G255 B197 W255
R255 G255 B234 W255
16
0-9
10-19
20-29
30-39
40-49
50-59
60-69
70-79
80-89
90-99
100-109
110-119
120-129
130-139
140-149
150-159
160-169
170-179
180-189
190-199
200-209
210-219
220-229
230-239
240-249
250-255
ID effect
No function
ID 1
ID 2
ID 3
ID 4
ID 5
ID 6
ID 7
ID 8
ID 9
ID 10
ID 11
ID 12
ID 13
ID 14
ID 15
ID 16
ID 17
ID 18
ID 19
ID 20
ID 21
ID 22
ID 23
ID 24
ID 25
TECHNICIAL SPECIFICATIONS
Model
M 368Z QUAD ZOOM MOVING WASH
Voltage
110V- 250V / 50-60Hz
Power consumption:
380W
LED
36x8pcs RGBW QUAD
Gross Weight
9.5Kgs
Dimensions
39(H) x 39(W) x44(L) mm

www.evolite-pro.com