Experia IRiS User manual

M Clayton
05/10/2017
V1
010065
IRiS LED Infinity Tunnel
(3 Shapes)

Congratulations on the purchase of your IRiS LED Infinity Tunnel (3 shapes)!
The IRiS LED Infinity Tunnel (3 shapes) has been designed specifically for people with special needs
and should, if used in accordance with these guidelines, offer years of switching learning and fun!
The IRiS LED Infinity Tunnel (3 shapes) offers endless opportunities to develop numerous skills
including colour recognition, cause and effect, and many more
The IRiS LED Infinity Tunnel (3 shapes) is an IRiS Listener and can be controlled by IRiS Talkers.
Please ensure you read this Instruction Manual in full before operating the unit.
Heed all warnings on the product and within this manual. If upon receipt of this product, the user
suspects that the product is defective, and/or requires service or repair due to malfunction or
damage to the product, please contact the manufacturer immediately. Please be aware that
improper installation and/or use or misuse of this product may result in injury, death, or adverse
reactions to its user. This product is intended to be installed and/or use by a trained professional.
Failure to comply with these precautions or with specific warnings elsewhere in this manual violates
safety standards of design, manufacture, and intended uses of the product.
Features
IRiS Wirefree Compatible
Ergonomic Design
Latest LED Technology
Hundreds of Shades of Colour
No Lamp Change –LED
Completely Silent
Safe Low Voltage –transformer supplied
Easy upgrade/maintenance
Durable
Easy to use
3 Year Manufacturers Guarantee (Return to base)
We recommend the IRiS LED Infinity Tunnel (3 shapes) be installed by a competent person by
following the installation manual supplied with this product

Getting Started
1. Connect the XLR connector from the transformer supplied into the socket on the left side of
the IRiS LED Infinity Tunnel (3 shapes).
2. Connect the standard mains plug to an electrical outlet.
3. Switch on the electrical outlet.
4. The IRiS LED Infinity Tunnel (3 shapes) will now illuminate and go through its colours and go
off.
5. The unit is ready for use.
6. Decide which IRiS Talker you want to use to control the IRiS LED Infinity Tunnel (3 shapes)
with then go to the Pairing section below.
Pairing to IRiS Listeners
This procedure is split into 2 sections, one for those who do not have an IRiS Master Pairer and for
those who do.
Without an IRiS Master Pairer
Every IRiS Listener has a button on it called a pairing button. To get the IRiS LED Infinity Tunnel (3
shapes) to work with a product, first turn on the IRiS LED Infinity Tunnel, then decide which IRiS
Talker you want to control it with –in this example we use the IRiS Qube, but all work in the same
manner. Next, find the pairing button (located next to the power socket) on the product and press
it. You then need to activate the IRiS Qube within 5 seconds (in this case you would turn the Qube
over). The IRiS Infinity Tunnel (3 shapes) will now change colour every time you turn the Qube if
correctly paired. If it does not, then repeat the above.
With an IRiS Master Pairer
To get the IRiS LED Infinity Tunnel (3 shapes) to work with a product, first turn on the IRiS LED
Infinity Tunnel (3 shapes) then decide which IRiS Talker you want to control it with –in this example
we use the IRiS Qube, but all work in the same manner. Then find the button on the IRiS Master
Pairer that corresponds with the IRiS LED Infinity Tunnel (3 shapes) and press it. You then need to
activate the IRiS Qube within 5 seconds (in this case you would turn the Qube over). The IRiS Infinity
Tunnel (3 shapes) will now change colour every time you turn the Qube if correctly paired. If it does
not, then repeat the above.

Cleaning and Maintenance
The unit should be cleaned with a damp soft cloth. A non-abrasive cleaning agent may be used for
stubborn stains. Ensure no liquid enters the base of the unit.
The unit has been designed for use by people with special needs, however this does NOT mean it is
unbreakable. You must ensure the unit is not hit with anything and that no one pulls or pushes the
unit.
Troubleshooting
Q. The unit doesn’t work.
A1. Is it switched on? If so, see A2
A2. Has the unit scrolled through its colours? If so, see A3
A3. Has the unit been paired to an IRiS Talker? If so, see A4
A4. Is the battery in the IRiS Talker fully charged? If so, see A5
A5. Have you tried a different IRiS Talker? If so, please contact us.

Contact Details
For USA please email [email protected]om
For Ireland please email [email protected]
For UK and rest of the world email [e-mail]
Telephone: [phone].
Please note: email is our support teams preferred communication and this takes precedence over
telephone calls.
QUESTIONS & IDEAS?
If you have an idea on how to improve this product or want to see your product idea realised, please
email: [e-mail].
All ideas are presented to our OT, technical and finance department and if all procedures are passed
we will contact you to discuss your idea further.
We can’t promise to develop every product but if it’s a great idea, we’ll try!
Manufactured proudly in the UK by:
Experia, Acorn Phase 3, High Street, Grimethorpe, S72 7BD.
© Copyright 2017 Experia All rights reserved. Experia is a registered trademark