Extreme USB RV2850 User manual

USB 1.1 RV2850
Before you get started, ensure that all the drivers
required for your USB device(s) are installed.
Quick
Start
Guide
Local Extender Remote Extender
1Place units where desired and connect the
CAT 5e/6/7 (solid core) extension link cable
to the Link ports (RJ45) on the local extender
and remote extender units.
(CAT 5e/6/7 cable
not included)
3Attach USB device(s) to the remote extender.
*Maximum Cable Range:
Full-Speed and Low-Speed: up to 40m (131 ft)
Low-Speed HID Devices: up to 85m (279 ft)
2Connect the local extender to your computer
using the included USB cable.
Computer
Product Contents:
▪USB 1.1 RV2850 Local Extender
▪USB 1.1 RV2850 Remote Extender
▪USB Cable
▪Quick Start Guide
2-Port USB 1.1 85m* CAT 5e/6/7
Extender System

FCC Radio Frequency Interference Statement Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference,and (2) this device must accept any interference received including interference that may cause undesired operation.
CE Statement
We, Icron Technologies Corporation,an Analog Devices brand, declare under our sole responsibility that the Icron USB 1.1 RV2850, to which this
declaration relates, is in conformity with European Standards EN 55024, EN 55032, EN 61000, and RoHS Directive 2011/65/EU + 2015/863/EU.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
CAN ICES-3 (B)/ NMB-3 (B)
WEEE Statement
The European Union has established regulations for the collection and recycling of all waste electrical and electronic equipment (WEEE).
Implementation of WEEE regulations may vary slightly by individual EU member states. Please check with your local and state government
guidelines for safe disposal and recycling or contact your national WEEE recycling agency for more information.
Product Operation and Storage
Please read and follow all instructions provided with this product and operate for intended use only. Do not attempt to open the product casing
as this may cause damage and will void warranty. When not in use, product should be stored in a dry location between -20°C and 70°C.
Certification and Compliance
Icron Technologies Corporation
An Analog Devices Brand
4664 Lougheed Hwy., Suite 221
Burnaby, BC
V5C 5T5, Canada
[phone]
Copyright © 2021 Icron | An Analog Devices Brand.
All rights reserved.Information contained herein is
subject to change without notice.
90-01049-D01