Extreme USB USB 3.0 SP3022 User manual

3
Before you get started, ensure that all the drivers required for your USB device(s)
are installed noting this product does not support USB 1.1 or 2.0 devices.
Power the Remote Extender with
the included adapter and tighten
the locking ring.
Link
1
1
5Connect the Local Extender to a
computer with the included USB cable.
Link
Computer
Remote Extender (front view)
Local Extender
(rear view)
OM3 Multimode Fiber
Remote Extender (rear view)
Max. distance between Local and Remote Extenders: Up to 50m
with USB 3.0 storage type devices and up to 100m when using
USB 3.0 bulk traffic cameras.
1
4Remove the white sticker from the back of
the Local Extender (if still affixed). Directly
connect the Local and Remote Extenders
with a Duplex LC crossover multimode
fiber cable (not included).
Link
Link
2Place the Remote Extender unit where
desired and attach the USB 3.0 device(s)
to the Remote Extender.
Power
Status
Host
In your computer settings, disable the Suspend feature.
a) For Windows, open the Control Panel,
then select Power Options.
c) Select Never for Put the computer to sleep
for all the configurations presented.Then
click Change advanced power settings.
b) For each of the plans listed, click on
Change plan settings.
d) Expand USB settings.
Expand USB selective suspend setting.
Select Disabled for all options listed.
Note: AIA USB3 Vision™ locking USB connectors supported.
For more information and steps to disable your computer’s suspend feature,refer to the SP3022 user guide.
USB 3.0 SP3022
2-Port USB 3.0 Multimode
Fiber Extender System
Quick
Start
Guide
Package Contents:
▪USB 3.0 SP3022 Local Extender
▪USB 3.0 SP3022 Remote Extender
▪Locking AC Power Adapter
▪Country Specic Power Cord
▪USB 3.0 Cable
▪Quick Start Guide

FCC Radio Frequency Interference Statement Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received including interference that may cause undesired operation.
CE Statement
We, Icron Technologies Corporation, an Analog Devices brand, declare under our sole responsibility that the USB 3.0 SP3022, to which this
declaration relates, is in conformity with European Standards EN 55024, EN 55032, EN 61000, and RoHS Directive 2011/65/EU + 2015/863/EU.
IC Statement
This Class B digital apparatus complies with Canadian ICES-003.
CAN ICES-3 (B)/ NMB-3 (B)
WEEE Statement
The European Union has established regulations for the collection and recycling of all waste electrical and electronic equipment (WEEE).
Implementation of WEEE regulations may vary slightly by individual EU member states. Please check with your local and state government
guidelines for safe disposal and recycling or contact your national WEEE recycling agency for more information.
Product Operation and Storage
Please read and follow all instructions provided with this product and operate for intended use only. Do not attempt to open the product casing
as this may cause damage and will void warranty. Use only the power supply provided with this product. When not in use, product should be
stored in a dry location between -20°C and 70°C.
Certication, Compliance and Warranty Information
Icron Technologies Corporation
An Analog Devices Brand
4664 Lougheed Hwy., Suite 221
Burnaby, BC
V5C 5T5, Canada
[phone]
Copyright © 2022 Icron | An Analog Devices Brand.
All rights reserved. Information contained herein is
subject to change without notice.
90-01060-D01