Extreme USB USB 2.0 RG2311 User manual

USB 2.0 RG2311
1-Port USB 2.0 100m (330 ft) CAT 5e/6/7
Extender System with Flexible Power
Before you get started, ensure that all the drivers
required for your USB device(s) are installed.
Local Extender Remote Extender
1Place the units where desired, and connect the
CAT 5e/6/7 (solid core) extension link cabling into
the Link ports (RJ45) of the Local and Remote
Extenders.
2Connec
t the power adapter into your desired unit –
Local Extender or Remote Extender.
Max 100m
(CAT 5e/6/7 cable not included)
3Connect the Local Extender into your computer
using the included USB 2.0 cable.
Computer
4Attach your USB device to the Remote Extender.
Plug the power adapter into
either the local or remote unit
Quick
Start
Guide
Product Contents:
▪USB 2.0 RG2311 Local Extender
▪USB 2.0 RG2311 Remote Extender
▪USB 2.0 Cable
▪AC Power Adapter
▪Country Specic Power Cord
▪Quick Start Guide

FCC Radio Frequency Interference Statement Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference,and (2) this device must accept any interference received including interference that may cause undesired operation.
CE Statement
We, Icron Technologies Corporation, a Maxim Integrated brand, declare under our sole responsibility that the Icron USB 2.0 RG2311, to which this
declaration relates, is in conformity with European Standards EN 55024, EN 55032, EN 61000, and RoHS Directive 2011/65/EU + 2015/863/EU.
IC Statement
This Class A digital apparatus complies with Canadian ICES-003.
WEEE Statement
The European Union has established regulations for the collection and recycling of all waste electrical and electronic equipment (WEEE).
Implementation of WEEE regulations may vary slightly by individual EU member states.Please check with your local and state government
guidelines for safe disposal and recycling or contact your national WEEE recycling agency for more information.
Product Operation and Storage
Please read and follow all instructions provided with this product and operate for intended use only. Do not attempt to open the product casing
as this may cause damage and will void warranty.Use only the power supply provided with this product.When not in use,product should be
stored in a dry location between -20°C and 70°C.
Certification and Compliance
Icron Technologies Corporation
A Maxim Integrated Brand
4664 Lougheed Hwy., Suite 221
Burnaby, BC
V5C 5T5, Canada
[phone]
Copyright © 2020 Icron | A Maxim Integrated Brand.
All rights reserved.Information contained herein is
subject to change without notice.