Extreme USB RG2304N User manual

USB 2.0 RG2304N,
2304S or 2304GE-LAN
4-Port USB LAN or CAT 5e/6/7
Extender System
Quick
Start
Guide
Package Contents:
▪USB 2.0 RG2304N/S/GE-LAN Local Extender
▪USB 2.0 RG2304N/S/GE-LAN Remote Extender
▪USB 2.0 Cable
▪AC Power Adapter
▪Country Specic Power Cord
▪Quick Start Guide
12
3
1
Direct Connect
1
3
1
Max 100m between network devices
LinkMode
24V 1A Cong
Connect the Local Extender to the
computer using the included USB
cable.
Computer
Place extenders where desired and
connect the CAT 5e/6/7 extension link
cabling to the Link ports (RJ45) on the
Local and Remote Extenders.
Remote Extender (back view)
Local Extender (back view)
Local Extender (back view)
LinkModeCong
LinkModeCong
Before you get started, ensure that all the drivers required for your USB device(s) are installed.
2
4
Connect the Local Extender to the
computer using the included USB
2.0 cable.
Place the Remote Extender where desired.
Connect a CAT 5e/6/7 patch cable from the
Link port (RJ45) to a network switch or
wall network port connected to a switch.
Connect the Remote Extender to the AC
adapter and plug it into a power source.
Place the Local Extender where desired
and connect a CAT 5e/6/7 patch cable from
the Link port (RJ45) to a network switch or
wall network port connected to a switch.
Network Connect
Attach USB device(s) to the Remote
Extender.
Host
Activity
Link
Power
Computer
Max 100m between network devices
Remote Extender (back view)
Remote Extender (front view)
LinkModeCong
Local Extender (back view)
Local Extender (back view)
LinkModeCong
4
Connect the Remote Extender to the
AC adapter and plug it into a power
source.
Attach USB device(s) to the Remote
Extender.
Max 100m (CAT 5e/6/7 cable not included)
Host
Activity
Link
Power
Remote Extender (back view)
Remote Extender (front view)
LinkMode
24V 1A Cong
LinkMode
24V 1A Cong

FCC Radio Frequency Interference Statement Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received including interference that may cause undesired operation.
CE Statement
We, Icron Technologies Corporation, an Analog Devices brand, declare under our sole responsibility that the USB 2.0 RG2304 Series, to which this
declaration relates, is in conformity with European Standards EN 55024, EN 55032, EN 61000, and RoHS Directive 2011/65/EU + 2015/863/EU.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
CAN ICES-3 (B)/ NMB-3 (B)
WEEE Statement
The European Union has established regulations for the collection and recycling of all waste electrical and electronic equipment (WEEE).
Implementation of WEEE regulations may vary slightly by individual EU member states. Please check with your local and state government
guidelines for safe disposal and recycling or contact your national WEEE recycling agency for more information.
Product Operation and Storage
Please read and follow all instructions provided with this product and operate for intended use only. Do not attempt to open the product casing
as this may cause damage and will void warranty. Use only the power supply provided with this product. When not in use, product should be
stored in a dry location between -20°C and 70°C.
Certication, Compliance and Warranty Information
Icron Technologies Corporation
An Analog Devices Brand
4664 Lougheed Hwy., Suite 221
Burnaby, BC
V5C 5T5, Canada
[phone]
Copyright © 2022 Icron | An Analog Devices Brand
All rights reserved. Information contained herein is
subject to change without notice.
90-01102-D01