Extremis Captain's chair User manual

CAPTAIN’S CHAIR
© design by metrica
PRODUCT
SLIDING CHAIR – HIGH SLIDING CHAIR – PAW CHAIR – ROLLING
CHAIR – SWIVEL CHAIR – STORAGE NET – MAINTENANCE
READ INSIDE
ASSEMBLY INSTRUCTIONS,
HOW TO USE, USEFUL TIPS
FOR KEEPING YOUR TOOL FOR
TOGETHERNESS IN SHAPE
LANGUAGES
EN – NL – DE – FR – IT – ES
MORE
WWW.EXTREMIS.BE

LANGUAGES
ENGLISH P. 3
contents p. 3
assembly sliding chair p. 5
assembly high sliding chair p. 6
assembly paw chair p. 7
assembly rolling chair p. 8
assembly swivel chair p. 9
assembly storage net p. 10
maintenance p. 11
NEDERLANDS P. 13
inhoud p. 13
montage sliding chair p. 15
montage high sliding chair p. 16
montage paw chair p. 17
montage rolling chair p. 18
montage swivel chair p. 19
montage bagagenet p. 20
onderhoud p. 21
DEUTSCH P. 23
inhalt p. 23
montage sliding chair p. 25
montage high sliding chair p. 26
montage paw chair p. 27
montage rolling chair p. 28
montage swivel chair p. 29
montage ablage p. 30
pege p. 31
FRANÇAIS P. 33
contenu p. 33
montage sliding chair p. 35
montage high sliding chair p. 36
montage paw chair p. 37
montage rolling chair p. 38
montage swivel chair p. 39
montage storage net p. 40
entretien p. 41
ITALIANO P. 43
contenuto p. 43
montaggio sliding chair p. 45
montaggio high sliding chair p. 46
montaggio paw chair p. 47
montaggio rolling chair p. 48
montaggio swivel chair p. 49
montaggio storage net p. 50
manutenzione p. 51
ESPAÑOL P. 53
contenido p. 53
montaje sliding chair p. 55
montaje high sliding chair p. 56
montaje paw chair p. 57
montaje rolling chair p. 58
montaje swivel chair p. 59
montaje storage net p. 60
mantenimiento p. 61
2 contents

SLIDING CHAIR
PAW CHAIR
HIGH SLIDING CHAIR
english 3
4 x feet 4 x rubber
1 x shell 1 x frame 4 x M6x16 hexagon socket bolt
1 x shell 1 x frame 4 x M6x16 hexagon socket bolt
1 x shell 1 x frame 4 x M6x16 hexagon socket bolt
CONTENTS

ROLLING CHAIR
SWIVEL CHAIR
5 x wheels 5 x rubber 1 x mounting block
1 x shell 1 x frame 4 x M6x16 hexagon socket bolt
4 x wheels 4 x rubber 1 x mounting block
1 x shell 1 x frame 4 x M6x16 hexagon socket bolt
CONTENTS
4 contents + assembly sliding chair

+/- 10 min.
1 person
no. 4 hex key
ASSEMBLY SLIDING CHAIR
WHAT YOU NEED
2. Position the frame on the shell as shown in the gure
above and fasten it by means of 4 hexagon socket bolts
M6x16.
1. Put the shell upside down on a so surface with the
opening facing backwards so that you do not damage
the shell.
english 5

+/- 10 min.
2. Position the frame on the shell as shown in the gure
above and fasten it by means of 4 hexagon socket bolts
M6x16.
1. Put the shell upside down on a so surface with the
opening facing backwards so that you do not damage
the shell.
ASSEMBLY HIGH SLIDING CHAIR
WHAT YOU NEED
no. 4 hex key
1 person
6 assembly high sliding chair + assembly paw chair

+/- 10 min.
revision Table
ZONE REV. DESCRIPTION DATE APPROVED
unless otherwise specified: DIMENSIONS ARE IN MM
A4
PROJECT
NUMBER
TITLE
COMMENTS:
WEIGHT in kg
MATERIAL
CC_FT_gemonteerd_man
ual
3.85
23/05/2013
DATE CREATED
DATE MODIFIED
23/05/2013
1:10
PROPRIETARY AND CONFIDENTIAL : THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF EXTREMIS. ANY REPRODUCTION
IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF EXTREMIS IS PROHIBITED.
FINISH
DRAWN
SCALE
4. Position the frame on the shell as shown in the gure
above and fasten it by means of 4 hexagon socket bolts
M6x16.
2. Turn the frame upside down and put a rubber ring and
a foot on each of the legs.
3. Put the shell upside down on a so surface with the
opening facing backwards so that you do not damage
the shell.
1. Turn the frame upside down and put a rubber ring and
a chair castor on each of the 4 legs.
ASSEMBLY PAW CHAIR
WHAT YOU NEED
no. 4 hex key
plastic hammer
1 person
english 7

+/- 10 min.
revision Table
ZONE REV. DESCRIPTION DATE APPROVED
unless otherwise specified: DIMENSIONS ARE IN MM
A4
PROJECT
NUMBER
TITLE
COMMENTS:
WEIGHT in kg
MATERIAL
CC_WH_gemonteerd_m
anual
4.15
23/05/2013
DATE CREATED
DATE MODIFIED
23/05/2013
1:10
PROPRIETARY AND CONFIDENTIAL : THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF EXTREMIS. ANY REPRODUCTION
IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF EXTREMIS IS PROHIBITED.
FINISH
DRAWN
SCALE
4. Position the frame on the shell as shown in the gure
above and fasten it by means of 4 hexagon socket bolts
M6x16.
2. Secure each castor to the chair by gently tapping it
with the supplied block of wood and a hammer.
3. Put the shell upside down on a so surface with the
opening facing backwards so that you do not damage
the shell.
1. Turn the frame upside down and put a rubber ring and
a chair castor on each of the 4 legs.
ASSEMBLY ROLLING CHAIR
WHAT YOU NEED
no. 4 hex key
plastic hammer
1 person
8 assembly paw chair + assembly rolling chair

+/- 10 min.
4. Position the frame on the shell as shown in the gure
above and fasten it by means of 4 hexagon socket bolts
M6x16.
2. Secure each castor to the chair by gently tapping it
with the supplied block of wood and a hammer.
3. Put the shell upside down on a so surface with the
opening facing backwards so that you do not damage
the shell.
1. Turn the frame upside down and put a rubber ring and
a chair castor on each of the 5 legs.
ASSEMBLY SWIVEL CHAIR
WHAT YOU NEED
no. 4 hex key
plastic hammer
1 person
english 9

+/- 10 min.
6. Tie a double knot in the elastic
and trim o any excess.
7. Repeat these steps on the other
side.
3. Pass the elastic once again
through the rst hole, upward
from below.
4. en wind the elastic around the
frame’s horizontal element
(downward from above) and pass
it through the next hole. Proceed
in the same way until you reach
the last hole.
5. When you have passed the elastic
through the last hole, wind it around
the outer vertical elemenet of the
frame, then under the horizontal
element and pass it once again
through the last hole downward
from above.
1. Pass the elastic through the rst
hole. Make sure that the knot is
located on the underside of the
storage net.
2. en wind the elastic around the
outer vertical element of the
frame and under horizontal
element.
ASSEMBLY STORAGE NET
WHAT YOU NEED
scissors
1 person
10 assembly storage net + maintenance

MAINTENANCE
SHELL
Use common kitchen cleaning
products. Avoid using aggressive
products. ese surfaces are best
cleaned with a neutral cleaning
product diluted in water.
In case of stubborn stains, we
recommend using a magic sponge.
POWDER COATED LEGS
Clean with lukewarm water and
a mild detergent. DO NOT USE
abrasive scouring powders or
scourers as they will scratch the
surface.
STAINLESS STEEL LEGS
Although stainless steel has its own
oxidation layer protecting the steel
from rust, it remains necessary
to regularly remove deposit and
dirt from the steel with a dry cloth
and some stainless steel cleaner. If
damaged, the oxidation layer
cannot always repair itself
completely. A maritime climate,
bleach, acid rain, an aggressive
industrial or urban environment
seriously damage the material. ey
determine the frequency and the
necessity of the surface cleaning.
e appropriate cleaning products
are readily available. Steel will
however only remain rustproof if
it is covered by the oxidation layer.
Consequently, you must prevent the
formation of a permanent layer of
dirt, especially in case of aggressive
environmental factors.
CUSHION
First of all, prevent the cushion from
getting really dirty by storing it
indoors when not in use.
e best way to clean slightly dirty
cushions is to use a dry or slightly
damp cloth. Alternatively, you can
also use a vacuum cleaner with the
so brush attachment.
Remove stains by immediately
dabbing them gently with an
absorbent cloth. Stains on the edge
of the cushion can be removed by
gently dabbing with small circular
movements from the outside
towards the centre of the stain. Any
persisting stains can be treated
with a so sponge dipped in a
lukewarm soapy solution. If this
does not work, you can briey soak
the cushion in lukewarm water with
a stain remover. In any case, we
recommend that you always test this
rst on a part that is not visible and
that you always strictly follow the
manufacturer’s instructions. Do not
use bleach!
Do not launder the cushion in a
washing machine!
IMPORTANT
Stains should be removed
immediately with a clean, so cloth,
particularly in case of dark-coloured
liquids such as wine, ink, coee,
coke, oil and bird droppings. If
le to dry, these liquids may cause
permanent damage!
MAGIC SPONGE
Only use the Miraclean sponge when
normal cleaning with lukewarm
water, so soap and a normal sponge
isn’t sucient!
If stubborn stains remain visible
aer treatment according to the
instructions (see product manual),
you can use the MiraClean sponge
provided. Dip the sponge in water
and rub it over the stain. Do not
rub too hard with this sponge as
this might cause dull patches on a
surface.
ere is no need to use cleaning
products. Water alone is sucient.
is sponge is made of melamine
resin and wears away with use. e
sponge is very easy to use and gives
results up to 26 times more quickly
than a traditional microbre cloth.
e magic sponge gets rid of most
stubborn stains without extra eort.
Never use this sponge on high-gloss
surfaces as it may cause dull
patches.
e magic sponge is the solution for
getting rid of stubborn stains such as
felt-tip pens, grease, scu marks,
limescale marks or coee and tea
stains. e magic sponge can be used
on tarpaulin fabric, plastic proles,
glass, steel, chrome, aluminium,
porcelain, articial leather and
many types of oor.
For more information, contact
Extremis: [e-mail]
english 11

12 inhoud
LANGUAGES
ENGLISH P. 3
contents p. 3
assembly sliding chair p. 5
assembly high sliding chair p. 6
assembly paw chair p. 7
assembly rolling chair p. 8
assembly swivel chair p. 9
assembly storage net p. 10
maintenance p. 11
NEDERLANDS P. 13
inhoud p. 13
montage sliding chair p. 15
montage high sliding chair p. 16
montage paw chair p. 17
montage rolling chair p. 18
montage swivel chair p. 19
montage bagagenet p. 20
onderhoud p. 21
DEUTSCH P. 23
inhalt p. 23
montage sliding chair p. 25
montage high sliding chair p. 26
montage paw chair p. 27
montage rolling chair p. 28
montage swivel chair p. 29
montage ablage p. 30
pege p. 31
FRANÇAIS P. 33
contenu p. 33
montage sliding chair p. 35
montage high sliding chair p. 36
montage paw chair p. 37
montage rolling chair p. 38
montage swivel chair p. 39
montage storage net p. 40
entretien p. 41
ITALIANO P. 43
contenuto p. 43
montaggio sliding chair p. 45
montaggio high sliding chair p. 46
montaggio paw chair p. 47
montaggio rolling chair p. 48
montaggio swivel chair p. 49
montaggio storage net p. 50
manutenzione p. 51
ESPAÑOL P. 53
contenido p. 53
montaje sliding chair p. 55
montaje high sliding chair p. 56
montaje paw chair p. 57
montaje rolling chair p. 58
montaje swivel chair p. 59
montaje storage net p. 60
mantenimiento p. 61

nederlands 13
INHOUD
1 x schelp 1 x onderstel 4 x binnenzeskantbout M6 x 16
1 x schelp 1 x onderstel 4 x binnenzeskantbout M6 x 16
4 x poten 4 x rubber
1 x schelp 1 x onderstel 4 x binnenzeskantbout M6 x 16
SLIDING CHAIR
PAW CHAIR
HIGH SLIDING CHAIR

14 inhoud + montage sliding chair
1 x schelp 1 x onderstel 4 x binnenzeskantbout M6x16
1 x schelp 1 x onderstel 4 x binnenzeskantbout M6x16
4 x wielen 4 x rubber 1 x montageblok
5 x wielen 5 x rubber 1 x montageblok
ROLLING CHAIR
SWIVEL CHAIR
INHOUD

nederlands 15
MONTAGE SLIDING CHAIR
BENODIGDHEDEN
inbussleutel nr. 4
1 persoon
1. Leg de schelp omgekeerd op een zachte ondergrond
met de opening naar achteren gericht zodat je deze
niet beschadigt.
+/- 10 min.
2. Plaats nu het onderstel op de schelp zoals aangegeven
op bovenstaande tekening en bevestig d.m.v. 4
binnenzeskantbouten M6x16.

16 montage high sliding chair + montage paw chair
MONTAGE HIGH SLIDING CHAIR
BENODIGDHEDEN
inbussleutel nr. 4
1 persoon
1. Leg de schelp omgekeerd op een zachte ondergrond
met de opening naar achteren gericht zodat je deze
niet beschadigt.
+/- 10 min.
2. Plaats nu het onderstel op de schelp zoals aangegeven
op bovenstaande tekening en bevestig d.m.v. 4
binnenzeskantbouten M6x16.

nederlands 17
MONTAGE PAW CHAIR
BENODIGDHEDEN
inbussleutel nr. 4
plastic hamer
1 persoon
1. Draai het onderstel om en plaats op de 4 asjes telkens
een rubber ring en een pootje.
+/- 10 min.
2. Bevestig de pootjes door ze met een hamer vast te
kloppen.
3. Leg de schelp omgekeerd op een zachte ondergrond
met de opening naar achteren gericht zodat je deze
niet beschadigt.
4. Plaats nu het onderstel op de schelp zoals aangegeven
op bovenstaande tekening en bevestig d.m.v. 4
binnenzeskantbouten M6x16.
revision Table
ZONE REV. DESCRIPTION DATE APPROVED
unless otherwise specified: DIMENSIONS ARE IN MM
A4
PROJECT
NUMBER
TITLE
COMMENTS:
WEIGHT in kg
MATERIAL
CC_FT_gemonteerd_man
ual
3.85
23/05/2013
DATE CREATED
DATE MODIFIED
23/05/2013
1:10
PROPRIETARY AND CONFIDENTIAL : THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF EXTREMIS. ANY REPRODUCTION
IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF EXTREMIS IS PROHIBITED.
FINISH
DRAWN
SCALE

MONTAGE ROLLING CHAIR
BENODIGDHEDEN
inbussleutel nr. 4
plastic hamer
1 persoon
1. Draai het onderstel om en plaats op de 4 asjes telkens
een rubber ring en een pootje.
+/- 10 min.
2. Bevestig elk wieltje door dit vast te kloppen met het
bijgevoegde montageblokje en een hamer.
3. Leg de schelp omgekeerd op een zachte ondergrond
met de opening naar achteren gericht zodat je deze
niet beschadigt.
4. Plaats nu het onderstel op de schelp zoals aangegeven
op bovenstaande tekening en bevestig d.m.v. 4
binnenzeskantbouten M6x16.
18 montage paw chair + montage rolling chair
revision Table
ZONE REV. DESCRIPTION DATE APPROVED
unless otherwise specified: DIMENSIONS ARE IN MM
A4
PROJECT
NUMBER
TITLE
COMMENTS:
WEIGHT in kg
MATERIAL
CC_WH_gemonteerd_m
anual
4.15
23/05/2013
DATE CREATED
DATE MODIFIED
23/05/2013
1:10
PROPRIETARY AND CONFIDENTIAL : THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF EXTREMIS. ANY REPRODUCTION
IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF EXTREMIS IS PROHIBITED.
FINISH
DRAWN
SCALE

nederlands 19
MONTAGE SWIVEL CHAIR
BENODIGDHEDEN
inbussleutel nr. 4
plastic hamer
1 persoon
1. Draai het onderstel om en plaats op de 5 asjes telkens
een rubber ring en een wieltje.
+/- 10 min.
2. Bevestig elk wieltje door dit vast te kloppen met het
bijgevoegde montageblokje en een hamer.
3. Leg de schelp omgekeerd op een zachte ondergrond
met de opening naar achteren gericht zodat je deze
niet beschadigt.
4. Plaats nu het onderstel op de schelp zoals aangegeven
op bovenstaande tekening en bevestig d.m.v. 4
binnenzeskantbouten M6x16.

MONTAGE STORAGE NET
20 montage bagagenet + onderhoud
BENODIGDHEDEN
schaar
1 persoon
1. Steek het elastiekje door het eerste
gaatje zodat de knoop onderaan
zit.
2. Ga vervolgens rond de buitenste
schuine as v/h frame, onder de
horizontale as v/h frame.
3. Ga nu terug door het eerste gaatje,
van onder naar boven.
4. Vervolgens terug rond de
horizontale as v/h frame (van
boven naar onder) en dan telkens
door het volgende gaatje.
5. Eens je door het laatste gaatje
bent, ga je nu eerst rond de
buitenste schuine as v/h frame,
onder de horizontale as v/h frame
en terug door het laatste gaatje
van boven naar onder.
6. Leg een dubbele knoop in het
elastiek en snij het overtollige
weg.
7. Doe nu net hetzelfde aan de andere
kant.
+/- 10 min.