Extremis Bistroo User manual

Bistroo

IMPORTANT! RETAIN FOR FUTURE
REFERENCE: READ CAREFULLY.

Table of contents 1/2
Mounting kit 
Exploded view 
Assembly Bistroo 
This is an interactive PDF
You can easily navigate through this manual, allowing you to
smoothly jump from one page to the other.
Table tray 

Table of contents 2/2
Extended tabletop 
Floor fastening 
This is an interactive PDF
You can easily navigate through this manual, allowing you to
smoothly jump from one page to the other.
Warnings - Text instructions -
Maintenance 

6
4 x M8x20
4 x M8x30
4 x M6x12
4 x M6x12
6 x M6x12
4 x M8
4 x M6
4 x M6
6 x M6
Mounting kit BIS344-1 to fix the
logo frame to center leg
Mounting kit
Mounting kit BIS347 to fix back
support to center leg support
Mounting kit BIS703
to fix a seat
Mounting kit BIS345 to fix the
tabletop to the center leg
Mounting kit BIS346
to fix the backrest

7
Exploded view

8
2.
1.
Bistroo
BIS345
BIS344-1
35’
N° 4 - 5
N° 13
4 x M6x124 x M6
2.
4 x M8x20

9
3a.
BIS347
3b.
4 x M8x30
Position the backrest on the outside of the logo frame
Do this for both sides

10
4a.
4b.
BIS347
4 x M8
Slide the left and right leg over the bolts
Do this for both sides

11
5.
4 x M6x124 x M6
8 Nm
MAX!
1
2
3
4
8 Nm
Tighten carefully!
Excessive force may
damage the coating!
BIS345
per seat

12
6.
BIS346
6 x M6x126 x M6
8 Nm
MAX!
Tighten carefully!
Excessive force may
damage the coating!

13
Position the table tray in the cut-out of the tabletop
Table tray

14
Extended tabletop
Position the extended tabletop in the cut-out of the
tabletop, make sure the logo on the tabletop is facing
away from the Bistroo

15
1.
10’
N° 34
2.
Floor fastening
Drill a hole in the plastic cap Pull the plastic cap out
using a screwdriver

16
3.
4.
Do not tighten yet!

17
5.
6.
Use the most appropriate fasteners for the surface on which
the Bistroo is to stand
Tighten all bolts by tightening the plastic cap

18
Warnings
Text instructions
Maintenance
Warnings 
Assembly text instructions 
Maintenance 

19
General
• Do not use any sharp tools to open the packaging.
• We strongly advise against using power tools.
• Tripping hazard, mind your step.
• Do not put out cigarettes on the bench.
• Not grafitti proof.
• Do not leave children unattended whilst playing on the bench.
• To avoid danger of suocation, keep plastic bags away from babies
and children.
• Colors can dier over years and from batch to batch.
Product
• Anchoring the product has to be done by qualified people.
• For anchoring: use suitable bolts or screws from a specialized store
depending on the material your terrace is made of.
• Stackable up to 4 pieces.
• Always stack the tables with 2 people.
• Only use Extremis accessories.
• Do not sit on the tabletop.
• Do not stand or jump on the seat or the tabletop.
• Max. 1 person or 120 kg per seat.
Powder coating
• White powder coating requires more maintenance.
• Do not use abrasive scouring powders or scourers as they will scratch
the surface.
• Color can fade to some extent when exposed to UV.
• Flame retarding - NEN-EN13501-1 A2-sl - Satisfying the same criteria
as Class B for the SBI-test according to EN13823. In addition,
under conditions of a fully developed fire these products will nog
Warnings

20
significantly contribute to the fire load and fire growth.
• Dark colors can get very hot in sunny weather.
Sunbrella
• Not waterproof, store inside!
• Shake or brush o loose dirt immediately.
• UV color fasteness: 7/8 (ISO 105-B02).