Extremis AMAi User manual

AMAi
Galvanized version

IMPORTANT! RETAIN FOR FUTURE
REFERENCE: READ CAREFULLY.

Table of contents 1/3
Mounting kit 
Exploded view 
Assembly standard module 
Assembly extension module 
This is an interactive PDF
You can easily navigate through this manual, allowing you to
smoothly jump from one page to the other.

Table of contents 2/3
Add-on table 
Assembly screenholder 
This is an interactive PDF
You can easily navigate through this manual, allowing you to
smoothly jump from one page to the other.
Assembly tabletop fixation 
Assembly leveling feet 

Table of contents 3/3
Warnings - Text instructions -
Maintenance 
This is an interactive PDF
You can easily navigate through this manual, allowing you to
smoothly jump from one page to the other.
Assembly floor fastening 

7
4 x M10x45
2 x dop4 x M10x252 x M10x35
12 x washer M1012 x M10
Mounting kit AMA285 to fix A-frames
Mounting kit

8
8 x M8x20
2 x M10x503 x M10x408 x M108 x M10
Mounting kit AMA201-1 to fix the black dots to the A-frame
Mounting kit AMA239-1 to fix the extension module
4 x Connector axis
8 x Plastic cap

9
4 x M6x204 x M6x164 x spacer
2 x M8x20
4 x M4x124 x M4x204 x Spacer
Mounting kit AMA440 to fix the tabletop fixation
Mounting kit AMA442 to fix the floor fastening feet
Mounting kit AMA435 to fix the screenholder
2 x connection plate

10
Exploded view

11
2.
1. N° 5
N° 17
20’
+/- 160 cm
2.
Standard module - Galvanized
Use the polystyrene blocks in the packaging
of the A-frames for the rest of the assembly!

12
3a.
Logo on the outside
on both sides

13
3b.
AMA285
4 x M10x454 x washer M104 x M10
15 Nm
MAX!
Tighten carefully!
Excessive force may
damage the coating!
Do this for both A-frames,
do not tighten!

14
4.
AMA285
2 x M10x35
a
b
Make sure the set screw is centered to the
A-frame. Do this for both A-frames.

15
5.
AMA285
2 x washer M102 x M10
b
a
Do this for both sides

16
6.
AMA285
4 x M10x254 x washer M104 x M10
15 Nm
MAX!
Tighten carefully!
Excessive force may
damage the coating!
Do this for both A-frames,
tighten all bolts!

17
7.
AMA285
2 x washer M102 x M10 2 x dop
Do this for both A-frames

18
8.
Remove the polystyrene blocks

19
9.
b
a
4 x Connector axis
AMA201-1
per A-frame
Do this for both A-frames

20
10.
8 x M8x20
b
a
AMA201-1
per A-frame
8 x Plastic cap
Do this for both A-frames