Extremis PANTAGRUEL User manual

tools for togetherness
PRODUCT
PANTAGRUEL – BACK REST – ASSEMBLY WITH INUMBRA /
INUMBRINA – MAINTENANCE
PANTAGRUEL
© design by dirk wynants
READ INSIDE
ASSEMBLY INSTRUCTIONS,
HOW TO USE, USEFUL TIPS
FOR KEEPING YOUR TOOL FOR
TOGETHERNESS IN SHAPE
LANGUAGES
EN – NL – DE – FR – IT – ES
MORE
WWW.EXTREMIS.BE

LANGUAGES
ENGLISH P. 3
contents p. 3
assembly pantagruel p. 4
assembly back rest p. 6
assembly inumbra on pantagruel p. 7
assembly inumbrina on pantagruel p. 7
maintenance p. 8
NEDERLANDS P. 11
inhoud p. 11
montage pantagruel p. 12
montage rugleuning p. 14
montage inumbra in pantagruel p. 15
montage inumbrina in pantagruel p. 15
onderhoud p. 16
DEUTSCH P. 19
inhalt p. 19
montage pantagruel p. 20
montage rückenlehne p. 22
montage inumbra im pantagruel p. 23
montage inumbrina im pantagruel p. 23
pege p. 24
FRANÇAIS P. 27
contenu p. 27
montage pantagruel p. 28
montage dossier p. 30
montage inumbra dans pantagruel p. 31
montage inumbrina dans pantagruel p. 31
entretien p. 32
ITALIANO P. 35
contenuto p. 35
montaggio pantagruel p. 36
montaggio schienale p. 38
montaggio inumbra con pantagruel p. 39
montaggio inumbrina con pantagruel p. 39
manutenzione p. 40
ESPAÑOL P. 43
contenido p. 43
montage pantagruel p. 55
montage respaldo p. 46
montage inumbra con pantagruel p. 47
montage inumbrina con pantagruel p. 47
mantenimiento p. 48
2 contents

2/4 x back rest
(+le & right clip)
4/8 x bolt M10 x 20 4 x oor fastening plate
BACK REST FLOOR FASTENING
OPTIONAL
4 x wheel 4 x bolt M6x20 4 x at washer M6 1 x extra lock nut
M6
1 x stainless steel
plate
16 x countersunk bolt
M10x25
4 x bench 16 x bolt M8 x 16 16 x corrugated spring
washer M8
4 x leg 4 x bench support 4 x base plate 8 x countersunk bolt
M8x25
1 x tabletop 1 x lazy-susan 1 x stainless steel disk
CONTENTS
english 3

4 pantagruel
of
ASSEMBLY PANTAGRUEL
4. Put the bench upside down on a table (use the
packaging as protection) & assemble the leg with 4
bolts M8x16 & the corrugated spring washers M8.
Aer the bench is assembled, you can tighten the bolts
of the base plate completely.
5. Secure the leg with the bench to the tabletop with 4
countersunk bolts M10 x 25. Aer assembling the rst
leg, mount the opposite leg to maintain balance.
Remove the trestles.
2. Assemble the wheels to the axles with 4 bolts M6 x 20
and at washers M6. Use a 13 wrench when tightening
the bolts to secure the axle. ATTENTION: tighten the
bolts, but do not fully tighten them.
3. Secure the support and the base plate (or the optional
oor fastening plate, with the hole directed to the
centre. Use the xing media most suited to the type of
ground on which you intend to install the Gargantua
table.) to the leg with 2 countersunk bolts M8 x 25 but
don’t tighten it completely yet. Repeat this for all the
legs.
1. Put the tabletop diagonally on the trestles. Loosen the
lazy susan by unscrewing the nut on the bottom of the
tabletop and by removing the stainless steel plate.
Remove the lazy susan.
+/- 45 min.
no. 4-5-6 hex key
no. 13 spanner
2 people
WHAT YOU NEED

OPTIONAL LAZY SUSAN ANCHORING
If you would like to anchor the lazy susan (e.g. to prevent the), you can assemble the stainless steel plate again on the
bottom of the tabletop. Use the extra lock nut instead of the regular nut. is is a sustainable solution.
Do not tighten the extra lock nut too much so the lazy susan can still rotate freely.
6. Put the lazy susan and the stainless steel disk in the tabletop.
english 5