Extremis Kosmos Parasol Series Instruction Manual

The content of this document, in particular the mentioned models, is protected by copyrights and/or design rights. The present document and its content is communicated to you for information
purposes only. Any partial or total reproduction or any other use without our prior written permission is strictly prohibited. This technical sheet remains subject to possible changes. All dimensions are
in mm, unless mentioned otherwise. Extremis is not responsible for the errors in the documentation of products. All measurements are approximate and are provided for informational purposes only.
n° 16.2 kosmos parasol
technical sheet
Ve r s i o n 2 0111212
O
assembly directly to the floor
assembly on concrete base
H
h1
O
assembly on concrete wheel base
O
H
h1
h2
O
H
h1
h2
W
H
h1
W
H
h1
h2
W
H
h1
h2
H
h1
closed
assembly on Kosmos
L
L
L
L
L
L
L
l1
l
1
l1
l
1
dimensions
(mm) O L H h1
round 3250 3375 2005 1900
round
dimensions
(mm) O L H h1W
round 3250 3375 2025 1920 -
square - 3375 2025 1920 3250
dimensions
(mm) O L l1Hh
1h2W
round 3250 3375 760 2137 2032 112 -
square - 3375 760 2137 2032 112 3250
dimensions
(mm) O L l1Hh
1h2W
round 3250 3375 825 2215 2110 190 -
square - 3375 825 2215 2110 190 3250
square

COVER ROUND PARASOL COVER SQUARE PARASOL
box dimensions (mm) L W H qty (#)
volume
(m³)
gross
weight (kg)
net weight
(kg)
packaging
weight (kg)
parasol round (KPRW/KPRT) box 1 2250 250 250 1 0,141 24,5 21,2 3,3
parasol square (KPVW/KPVT) box 1 2650 250 250 1 0,166 27,4 24,1 3,3
concrete base (KC + IUB125) box 2 380 380 100 4 0,058 125,1 123,5 1,6
wheel base (KC + IUBW125) box 3 800 800 50 1 0,032 8,0 7,6 0,4
box 2 380 380 100 40,058 125,1 123,5 1,6
total: 0,455 310,1 299,9
note: other parts for your desired assembly are delivered inside the parasol box
LW
H
1
LW
H
2
L
W
H
3
HH
l1l1
dimensions (mm) l1H
round 1790 2005
square 2345 2005
round (closed position) square (closed position)

materials key facts thickness
layer
thickness density
in/out-
door water
UV colour
fastness
ame
retarding
mm micron 10³ kg/m³
High tech polyester - high rusting resistance
- periodical maintenance
0.37 n.a. 0,25 outdoor &
indoor
the fabric
has a water
column
of 1000
mm (EN
20811)
7/8 (ISO
105-B02)
/
Stainless steel - high UV resistance and
ultra strong
- low weight / high tear
strenght
- long term appearance
2 - 16 n.a. 8,0 outdoor &
indoor
n.a. very good NEN-
EN13501-
1 A1*
Concrete - made under high preasure
- matt and porous
100 n.a. 2,1 outdoor &
indoor
n.a. very good NEN-
EN13501-
1 A1*
Galvanized steel - most durable method for
protecting metal from
rusting
- protective layer
- very long life span
- can perfectly be recycled
2 - 10 50 - 100 7,5 outdoor &
indoor
n.a. very good:
galvanisa-
tion will
however
become
dull when
used
outdoors
NEN-
EN13501-
1 A1*
LED-light + dimmer - colour temperature of
3000K (warm white)
- 350mA
- 7W
n.a. n.a. n.a. outdoor &
indoor
IP65 / /
MATERIALS
high tech polyester
* NEN-EN13501-1 A1: Class A1 products will not contribute in any stage of the fire including the fully developed fire. For that reason they are assumed to be
capable of satisfying automatically all requirements of all lower classes.
stainless steel
galvanized steel base
with concrete blocks
LED-light
white taupe
parasol fabric colour options

www.extremis.be - [e-mail]
GOOD TO KNOW
Tests in a wind tunnel have shown that
the parasol resists up to 6 Beaufort.
Attention, we advice to close the parasol
from  Beaufort on.
Put the leather strap on the parasol to
prevent the parasol from opening.
This leather strap can also be used to
keep the parasol open:
A) in case of rain: creates water
draining.
B) after a long time not being in
use: its possible the parasol
magnets dont keep closed well.
ASSEMBL
1. Align the holes in the stainless
steel part with the holes in the
parasol pole. Insert four bolts
and tighten them securely. The
parasol pole can be slightly
tilted by turning the two adusting
screws in the two remaining
holes. To this end, first loosen the
top bolts a little until you obtain
the desired angle. Then turn the
adusting screws clockwise using
a  mm he agonal wrench until
they touch the parasol pole.
2. Take the parasol with its fabric
and bring the cable as closely as
possible to the top of the parasol
pole. In case of optional light,
insert the cable in the hole in the
parasol pole and lower it down
until it appears at the bottom.
1.
2.
3. Now insert the parasol as far as
possible into the hole in the
parasol pole and fasten it by
means of the bolts and put the
protective caps onto the parasol
and the parasol pole.
 . Now open the parasol. If the
magnets dont close well, first
loosen the velcro fasteners and
open the parasol again. Only
now you can position the velcro
fastener again.
3.
ANCHORING option 1
For anchoring on concrete base, place
the stainless steel part on the concrete
base and mark the spots to drill the
holes.
For more information, take a look at our
manual.
ANCHORING option 2
For anchoring directly to the floor,
place the stainless steel part on the floor
and mark the spots to drill the holes.
F.A. .
Q: Is the parasol wind resistant?
A: The parasol resists up to 6 Beaufort. Place the parasol with the opening to the
direction from where most of the wind will come. If theres too much wind, the
parasol will slam shut. We advice to close the parasol from  Beaufort on.
MAINTENANCE
Check: www.e tremis.be/tools/kosmos-parasol
APPLICATIONS
Freestanding with:
Kosmos 3-seater (2 ) + pouf
INSTRUCTIONS
 ou can open and close the parasol
as shown on the drawing. The parasol
closes by means of a magnete.
6
beaufort 50 km/h
IMPORTANT
We strongly advice to acquire the cover
for outdoor use. When applying the
cover correctly, the parasol can be left
outdoors.
Attention, we advice to close the parasol
and apply the cover from  Beaufort on.