Lilin CMD072 series User manual

MERIT LILIN ENT. CO., LTD
http://www.meritlilin.com
INSTRUCTION MANUAL
CMD072/076/172/176 Series
66-CMD072CSE
WDR ULTRAHIGH RES. COLOR DOME CAMERA
CMD072X/076X/172X/176X Series
D/N WDR ULTRAHIGH RES. VARI-FOCAL DOME CAMERA

IMPORTANT SAFEGUARDS
GRAPHIC SYMBOL EXPLANATION
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of
uninsulated "dangerous voltage" within the product's enclosure
that may be of sufficient magnitude to constitute a risk of electric
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature
shock to persons.
accompanying the unit.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS

CAUTION
Do not drop or strike this equipment.
Do not install the equipment near any naked flames or heat
sources.
Do not expose this unit to rain or excessive moisture, avoid
smoke and dust.
Do not cover cloth or to install this unit in poorly ventilated
places.
Do not continue to operate if there appears to be fault.
Do not touch the power connection with wet hands.
Do not damage the power cord or leave it under pressure.
Sensitive electronics inside are vulnerable to excessive shock.
Excessive heat could damage this unit.
Please the camera in an environmental housing for protection.
If the camera gets wet, unplug it and have it checked by
qualified service personnel.
This may lead to overheating.
If the unit ceases to function, contact qualified service
personnel for help.
Risk of short circuit or electric shock.
Risk of fire or shock circuit.

CONGRATULATIONS
Thank you for purchasing this Day/Night WDR Camera. You now
own one of the many fine CCTV products we manufactured. This
product has been carefully inspected under rigid quality control
and should reach you in perfect condition. With reasonable care,
it will provide years of reliable performance.
We recommend that you read this installation and operation
manual thoroughly before installing and operation your new
system.
Here you will find all the information you need to set up and use
the system. If any questions are not answered in the manual,
please contact your dealer.
Before proceeding, please read and observe all instructions and
warnings contained in this manual. Retain this manual with the
original bill of sale for future reference and, if necessary, warranty
service.
When unpacking your new camera, check for missing or damaged
items. If any item is missing, or if damage is evident,
I . Contact your dealer for
assistance.
DO NOT
NSTALL OR OPERATE THIS PRODUCT

WARRANTY INFORMATION
Please complete the following product purchase information. The
factory will requests this information when contacted for technical
support, or warranty repair. It is also valuable in case of loss or
theft.
Purchase Date
Serial Number
Model Number

TABLE OF CONTENTS
FEATURES
PART DESCRIPTION & DIMENSION
INSTALLATION
CONFIGURATION OF THE MENU
SETTING MENU AND FUNCTIONS
CAMERA ID
EXPOSURE
WDR/BLC
BRIGHTNESS
AGC (Automatic Gain Control)
SHUTTER (Shutter Speed)
SENS-UP
WHITE BAL (White Balance)
DAY/NIGHT
3D-DNR (Digital Noise Reduction)
PRIVACY
SPECIAL
D-ZOOM (Digital Zoom)
D-EFFECT (Digital Effect)
SHARPNESS
STABILIZER
COLOR
SYNC (Synchronization)
USER TITLE
LANGUAGE
RESET
SPECIFICATIONS
1
3
5
8
10
10
11
11
11
12
12
13
13
15
15
16
17
17
18
18
18
19
19
20
20
21
22

By adopting a diagonal 6mm(1/3") 410,000(NTSC) pixel, 470,000(PAL) pixel
CCD, the camera produces clear picture quality with a horizontal resolution of
600TV lines for color.
For images with high contrast between bright and dark areas from difficult
lighting conditions such as backlighting, this camera selectively illuminates
darker areas while decreasing the light level for brighter areas to even out the
overall brightness.
The high-performance DSP chip effectively removes low-light gain noise and
afterimage to provide clear images even in dark environments.
Equipped with a maximum X256 sens-up capacity and low luminance levels
of 0.0002Lux(F1.2), the camera achieves excellent performance in processing
images especially in very low light conditions.
The camera automatically identifies when it is either day or night time and
switched accordingly. During daylight the camera will switch to color to obtain
excellent image clarity, while at night the camera will switch to monochrome to
obtain improved picture definition.
The EIS function compensates for any camera movement, to produce more
stable pictures.
FEATURES
ULTRAHIGH RESOLUTION
WIDE DYNAMIC RANGE(WDR)
3D DIGITAL NOISE REDUCTION
SENS-UP(X256) / LOW LUMINANCE LIGHT
DAY&NIGHT(IR CUT REMOVABLE)
ELECTRONIC IMAGE STABILIZER(EIS)
1

2
The HSBLC function that effectively blocks strong light sources such as
headlights. It provides optimum performance in recognizing vehicular license
plates and objects at night.
This camera provides an on screen display(OSD) setup menu where all
advanced functions can be selected and setup via OSD.
Privacy zones prevent objects and areas such as windows and doors which
are within the camera's viewing range but not in the scope of surveillance,
8 masking areas per screen simultaneously.
Built-in continuous digital zooming control, X1 to X10.
Color-temperature is adjusted automatically to produce clean, natural and rich
color images. ATW, AWC, INDOOR and OUTDOOR modes are available to
obtain most suitable selection.
HIGHLIGHT SUPPRESS BACK LIGHT COMPENSATION(HSBLC)
ON SCREEN DISPLAY CONTROL(OSD)
PRIVACY ZONE
DIGITAL ZOOM
WHITE BALANCE

PART DESCRIPTION & DIMENSION
3
VIDEO OUTPUT JACK
DC POWER INPUT (DC12V 10%) JACK
DC12V (NON-POLARITY INPUT) OR AC24V POWER INPUT
BASE
FIX RING
INSIDE COVER
DOME COVER
LENS
Unit : mm
120
102
98
55
[CMD072/076 Series]

4
VIDEO OUTPUT JACK
DC POWER INPUT (DC12V 10%) JACK
DC12V (NON-POLARITY INPUT) OR AC24V POWER INPUT
BASE
FIX RING
INSIDE COVER
DOME COVER
LENS
120
102
98
55
Unit : mm
[CMD172/176 Series]

5
INSTALLATION
1. Put the provided screws (M3.0 x 25, wooden screw) through the holes marked
as "a", and fix the base in the desired area (FIG.1).
a
a
a
FIG. 1
2. The direction of the lens is adjustable through the adjustable Pan/Tilt brackets
and rotatable round bracket for Azimuth. The lens can be adjusted easily by
hand without using screw driver. Please refer to FIG.2 (Color Dome Camera)
and FIG.3 (Vari-Focal Dome Camera).
BRACKET
PAN
AZIMUTH
TILT
FIG. 2
(CMD072/076/172/176)
40mm
120
OSC SETTING
SET
RL
U
D

6
PAN
AZIMUTH
TILT
FIG. 3
(CMD072X/076X/172X/176X)
OSD SETTING
BRACKET
ZOOM ADJUSTMENT
FOCUS ADJUSTMENT
SET
RL
U
D
A. (UP): Push up to move the cursor upwards or to select items.
B. (LEFT): Push left to move the cursor to the left and to select or adjust
the parameters of the selected item. The parameters changes
each time this button is pushed.
C. (RIGHT): Push right to move the cursor to the right and to select or
adjust the parameters of the selected item. The parameters
changes each time this button is pushed.
D. (DOWN): Push down to move the cursor downwards or to select items.
E. SET: Press to executes selections and displays a submenu for an item
with the mark.
OSD SETTING
3. An extra RCA jack for easy installation. Plug the video input of monitor to
the RCA jack and adjust focus and zoom.
After finished, unplug the RCA jack. Please refer to FIG.4.

7
4. Put on the inside cover first, and followed by put on the dome cover.
Then tighten the fix ring(FIG.5).
bb
cc
FIG. 5
FIG. 4
NOTE Point each "b"
to each "c".

CAMERA
SETTING
CAMERA ID
EXPOSURE
3D-DNR
WHITE BAL
DAY/NIGHT
8
CONFIGURATION OF THE MENU
OFF/1~255
PUSH
ALC
OFF/LOW/MIDDLE/HIGH
ATW
DAY
COLOR TEMP
ELC
AWC
NIGHT
AUTO
RED(-100~100)
MANUAL
BLUE(-100~100)
WDR/BLC
BRIGHTNESS(0~100)
AGC
SHUTTER
SENS-UP
OFF/A.FLK/(1/160~1/90000)/(X512~X2)/AUTO
OFF
OFF
WDR
AUTO
BLC
HSBLC
WDR LIMIT(1~7)
SENS-UP LIMIT(X2~X256)
BLC LIMIT(1~7)
AREA SETTING
GRAY SCALE
GRAY/D.GRAY/BLACK
USER SCALE(0~5)
MASK OFF/ON
OFF/LOW/MIDDLE/HIGH
INDOOR/OUTDOOR
PRIVACY OFF
ON MASK NUMBER
DISPLAY
COLOR
HEIGHT(4~100)
WIDTH(4~100)
MOVE Y(20~80)
MOVE X(20~80)
AREA 1/2/3/4/5/6/7/8
OFF/ON
GRAY/WHITE/BLACK

RESET
EXIT
SPECIAL D-ZOOM
CAMERA REBOOT
OFF
OFF
INT
D-EFFECT
FACTORY RESET
COMMUNICATION
SHARPNESS(0~68)
STABILIZER
COLOR
SYNC
USER TITLE
LANGUAGE
ON
ON
LL
9
ZOOM(X1.1~X10)
PAN(-100~100)
TILT(-100~100)
OFF/V-FLIP/MIRROR/ROTATE
OFF/ON
OFF/ON
PHASE(0~359)
ENG
: Not used in the CMD072/076/172/176 Series.

SETTING MENU AND FUNCTIONS
To Open and Exit the Menu screen
1. Press "SET" button.
The Menu screen appears on the monitor. Check the current settings on the
menu.
2. Push or button to select the [EXIT] then push or button to select
a mode.
RET: Return to the previous.
TOP: Return to the CAMERA SETTING menu screen.
END: Exit the setup menu.
CAMERA SETTING
CAMERA ID
EXPOSURE
WHITE BAL
DAY/NIGHT
3D-DNR
PRIVACY
SPECIAL
RESET
EXIT
OFF
ALC
ATW
AUTO
MIDDLE
OFF
CAMERA ID
You can use the camera identification(CAMERA ID) to assign a number to the
camera.
1. Select [CAMERA ID] option on the [CAMERA SETTING] menu.
2. Push or button to select a CAMERA ID(OFF, 1~255).
The setup menu will be disappear after save the current setting value.
NOTE
CAMERA SETTING
CAMERA ID
EXPOSURE
WHITE BAL
DAY/NIGHT
3D-DNR
PRIVACY
SPECIAL
RESET
EXIT
OFF
ALC
ATW
AUTO
MIDDLE
OFF
10

EXPOSURE
You can set the exposure options using the EXPOSURE menu.
Select [EXPOSURE] option on the [CAMERA SETTING] menu. Press "SET"
button and the EXPOSURE menu appears.
CAMERA SETTING
CAMERA ID
EXPOSURE
WHITE BAL
DAY/NIGHT
3D-DNR
PRIVACY
SPECIAL
RESET
EXIT
OFF
ALC
ATW
AUTO
MIDDLE
OFF
EXPOSURE-ALC
WDR/BLC
BRIGHTNESS
AGC
SHUTTER
SENS-UP
EXIT
OFF
MIDDLE
AUTO
OFF
RET
50
WDR/BLC
Use WDR/BLC option to set the options for WDR or BLC camera.
1. Select [WDR/BLC] option.
2. Push or button to select a mode then press "SET".
WDR: Set the WDR LIMIT(1~7).
BLC: Set the BLC LIMIT(1~7).
HSBLC: Use for adjusting brightness the specific area of picture.
AREA SETTING: Push or button to select a area then push or
button to select a ON or OFF. Press "SET" button to exit the AREA
SETTING menu.
GRAY SCALE: Push or button to select a gray scale.
USER SCALE: Push or button to select a bright level(0~5).
MASK: Push or button to select a ON or OFF.
GRAY D.GRAY BLACK
BRIGHTNESS
You can set the brightness level.
1. Select [BRIGHTNESS] option.
2. Push or button to set the bright level(0~100).
11

EXPOSURE-ALC
WDR/BLC
BRIGHTNESS
AGC
SHUTTER
SENS-UP
EXIT
OFF
MIDDLE
AUTO
OFF
RET
50
AGC (Automatic Gain Control)
If the image are too dark, change the maximum [AGC] value to make the images
lighter.
1. Select [AGC] option.
2. Push or button to select a mode.
OFF LOW MIDDLE HIGH
EXPOSURE-ALC
WDR/BLC
BRIGHTNESS
AGC
SHUTTER
SENS-UP
EXIT
OFF
MIDDLE
AUTO
OFF
RET
50
SHUTTER (Shutter Speed)
1. Select [SHUTTER] option.
2. Push or button to set shutter speed.
A. FLK: Anti-Flicker
OFF A.FLK(1/100 or 1/120) 1/160~90000 X512~X2 AUTO
12

13
SENS-UP
If pictures are not clear due to darkness, use for increase the sensitivity of
picture.
1. Push or button to select [SENS-UP] option.
2. Push t a [AUTO].
To setting the [AUTO] function, select the [AUTO] on the [SHUTTER].
3. Press "SET" button and push or button to set SENS-UP LIMIT
(X2~X256).
or button to selec
If you set the AGC to [OFF] or the SHUTTER is set to one of the SHUTTER options
except AUTO on the [SHUTTER] menu, the [SENS-UP] setting is not available and
[---] mark is displayed.
NOTE
EXPOSURE-ALC
WDR/BLC
BRIGHTNESS
AGC
SHUTTER
SENS-UP
EXIT
OFF
MIDDLE
AUTO
OFF
RET
50
EXPOSURE-ALC
WDR/BLC
BRIGHTNESS
AGC
SHUTTER
SENS-UP
EXIT
OFF
MIDDLE
AUTO
OFF
RET
50
WHITE BAL (White Balance)
You can select one of three modes for white balance adjustment.
1. Select [WHITE BAL] option on the [CAMERA SETTING] menu.
2. Push or button to select one of three modes for white balance then
press "SET".

CAMERA SETTING
CAMERA ID
EXPOSURE
WHITE BAL
DAY/NIGHT
3D-DNR
PRIVACY
SPECIAL
RESET
EXIT
OFF
ALC
ATW
AUTO
MIDDLE
OFF
ATW AWC MANUAL
ATW (Auto Tracing White Balance):
The color temperature range for the proper white balance is approximately
1,700K~11,000K. Proper white balance may not be obtained under the
following conditions:
A. The color temperature is out of the 1,700K~11,000K range.
B. When the scene contains mostly high color temperature objects, such
as a blue sky or sunset.
C. When the scene is dim.
AWC PUSH : If you select the [AWC PUSH ] mode, you will be able
to setup the White Balance automatically using "SET" button.
MANUAL: You can set the white balance options manually.
COLOR TEMP: Push or button to select a function.
(INDOOR: 3,200K, OUTDOOR: 5,100K)
RED: Obtains the optimum amount of red gain.
BLUE: Obtains the optimum amount of blue gain.
14
WB MANUAL SETUP
COLOR TEMP
RED
BLUE
EXIT
INDOOR
RET
0
0