F Care Systems EVRF Instruction manual

EVRF
EndoVenous Radio Frequency
Quick User Guide
1. Display with touchscreen.
2. Connection for the 3M Cable.(black)
3. Connection for the footswitch.(blue)
4. Connection for the needle holder
pen and catheter.(red)
For more detailed information please consult the manual
WARNING! Patient may not be grounded or connected to any other radiofrequency device!
Use of the EVRF
Connect the footswitch to the apparatus (blue plug).
Switch on the apparatus, the welcome screen appears.
The program selection screen is shown.
1
2
3
4

D-COM-QUGe-07
EVRF settings for the CR45i catheter
Diameter vein 6 - 18 mm
Catheter CR45i
Needle 6 French Introducer
Power (watt) 25
Continuous mode Keep footswitch pressed down
Number beeps at start 2 x 3
Number beeps per 0,5 cm
retraction
3
Connection of pad required YES
Parameters for treatment of varicose veins and hemorrhoids:
www.fcaresystems.com - Tel: [phone]
EVRF settings for the transcutaneous treatment
Diameter vein 0,3 - 0,6 mm 0,7 - 1 mm
Treatment area Face Leg
Needle K3i K6i
Power (watt) 5 - 8
Max. 10
9 - 14
Max. 16
Impulse time 0,2 - 0,3 s 0,3 - 0,4 s
Max 0,5s
Connection of pad required NO NO
1639
EVRF settings for the HPR45i probe
Hemorrhoids Degree II, III, IV
Probe HPR45i
Power (watt) 25
Continuous mode Keep footswitch pressed down
Connection of pad required NO
EVRF settings for the CR30KAB catheter
Diameter vein 2 - 5mm
Catheter CR30KAB
Needle G20 needle
Power (watt) 15
Continuous mode Keep footswitch pressed down
Number beeps at start 3
Number beeps per 0,8cm
retraction
3
Connection of pad required Optional