FabiaTech FX5637 Series User manual

Version 1.3 FX5637 Series User’s Quick Reference Page 1/5
www.fabiatech.com ©2014-2017 FabiaTech orporation
1. Brief
The FX5637x is a fanless, compact size embedded system with Intel® i3™/ i5™/ i7™ processor board
inside. This user’s quick reference provides the I/O outlets description and their pin assignment.
2. Dimensions (in mm) an Front/Rear Panel Information
+
12~40V DODI
D
0
-1 0 1
3
FAST
2
1
2
HDDLAN2
POWER BUTTONDISPLAY2FASTANTENNA DIGITAL I/O
DISPLAY3USBRESET LAN1
(Front Panel)
19V
1
4
3
10101 1
2
1
2
EAR-PHONE
D IN
ANTENNA RT
USB MIOM3 OM1
OM2OM4 LAN2LAN1
ANTENNA
+12~24V +12V
D IN
ARD
-
SYS
(Rear Panel)
3. Packing List
A. Standard Items
1 FX5637x embedded system.
1 A to D power adapter, 1 A power cord cable, and 1 pair of cable-tie.
1 pack of 2.5” SATA hard disk installation kit (2 cables with 4 fixed screws).
1 3-pin apartable terminal block. (Pitch: 5.08mm)
1 6-pin apartable terminal block. (Pitch: 3.5mm)
2 screws for riser card installation and 4 screws for minicard (mini P Ie) installation.
1 compact disc includes software utilities and manuals.
B. Optional Items for All FX5637x system
# Half size mini P Ie module adapter kit (AK1006, 1 piece of metal with 2 screws, P/N:
0606010028G)
# Wall mounting kit (FX5636K1, P/N: 0606010027G, 2 pieces of metal with 4 fixed screws)
# DDR3L RAM anti-vibration kit (FX5637K1, P/N: 0606010033R, 2 pieces of metal with 6 fixed
screws and 2 thermal pads)
C. Optional Items for FX5637S1-ix
# 1 slot P I riser card (FB4705, P/N: 0153000001G)
# 1 slot P Ie riser card (FB4744, P/N: 0120010003R)
# Add-On card holder kit (FX5637K2, 1 piece of metal, 1 piece of plastic and 3 screws, P/N:
0606010034G)
. Optional Items for FX5637S2-ix
# 1 slot P I and 1 slot P Ie riser card (FB4745, P/N: 0120010004R)
# 2 slot P I riser card (FB4730, P/N: 0153010001G)
# 2 slot P Ie riser card (FB4756, P/N: 0153010006G)
# Add-On card holder kit (FX5637K3, 1 piece of metal, 2 pieces of plastic and 4 screws, P/N:
0606010035G)

Version 1.3 FX5637 Series User’s Quick Reference Page 2/5
www.fabiatech.com ©2014-2017 FabiaTech orporation
4. Features
* Processor Boar
Intel® ore-i low power processor with 8GB DDR3L RAM. (8GB DDR3L maximum)
FX5637x-i3 : i3™4102E (1.6GHz, 2 /4T, 3MB ache, 1600MHz FSB, 25 Watts)
FX5637x-i5 : i5™4422E (1.8GHz to 2.9GHz, 2 /4T, 3MB ache, 1600MHz FSB, 25 Watts)
FX5637x-i7 : i7™4700EQ (2.4GHz to 3.4GHz, 4 /8T, 6MB ache, 1600MHz FSB, 47 Watts)
* I/O Outlets
Two 10/100/1000 base-TX Ethernet ports.
6 USB ports, 2 RS-232, and 2 RS-232/422/485 serial ports.
1 VGA, 1 HD display port, 1 DP display port, 1 Earphone, and 1 Microphone connectors.
1 D -In plug connector, 1 3-pin terminal block, and 1 power button.
2 isolated inputs and 2 isolated outputs.
1 HDD/ Fast access LED and 2 LAN LEDs.
1 free P I/P Ie expansion slot. (Depend on riser cards and FX5637S1 only)
1 free P I and 1 free P Ie expansion slots. (Depend on riser cards and FX5637S2 only)
* Storage Bay
1 Fast socket for Fast modules.
2 mini P Ie sockets and 2 SIM sockets.
One 2.5" SATA hard disk space.
* Power requirement
+12 ~ +24V D , 3.35A maximum (2.42A typical) with FX5637x-i7, 19V input voltage, and w/o
expansion cards.
* Dimensions
252.0mm (D) x 210.0mm (W) x 77.2mm (H) without rubber stands and wall mounting kit.
5. I/O outlets an LED In icators
A. Power Connectors ( C +12 to +24V, 75W minimum)
Note: +12V input on terminal block is power supply for expansion card on FX5637S1/S2 models.
B. LAN LE Indicators (RJ45)
The LAN port is a RJ45 connector with 2 LEDs. The orange LED indicates data is accessing and
the green LED indicates on-line status.
6. Software Configuration an Driver Installation
Please refer to the driver installing documentaion in the included ompact Disc for installing what
device driver you need. If you need to change the system settings or configurations of I/O ports, Please
refer to User's Manual (also in the included ompact Disc) for details.
7. Open the Bottom Cover for installing HDD, DDR3L, mini-PCIe mo ules (WLAN), an
Antenna.
+12~24V
D IN
ARD
+12V
-
SYS
Terminal Block
D Plug-In onnector
N4
N8
Release 10 screws as upper figure shown
Install SATA HDD as upper figure shown. (4+3 screws)
Note: N8 is the SATA signal connector; N4 is used for SATA power connection with included
adapter cable.

Version 1.3 FX5637 Series User’s Quick Reference Page 3/5
www.fabiatech.com ©2014-2017 FabiaTech orporation
8. Install the CFAST Mo ule an Wall Mount Kit
9. Install the A -On Car s for FX5637S1-ix an FX5637S2-ix mo els
FX5637K1 (OPTION)
Install DDR3L RAM Module with FX5637K1. (Fasten the RAM module and help for heat dispassion)
Step 1:
Install the riser card and aux. power cable for add-on cards.
After all installations done, close bottom cover and fasten 10 screws
Install mini P Ie Module and Antenna.
Note that install SIM card (if necessary)
before installing mini P Ie module.
Installing half-size mini P Ie module if
necessary.
Half size mini P Ie adapter (Optional)
N9
RISER ARD (OPTION)

Version 1.3 FX5637 Series User’s Quick Reference Page 4/5
www.fabiatech.com ©2014-2017 FabiaTech orporation
10. Dimensions (in mm) an Front/Rear Panel Information of FX5637S1-ix
168mm REF (6.6inch)
PI Express half_length ARD
FX5637K2 (OPTION)
Step 2: Install the add-on card to the P I/P Ie slot smoothly.
Step 3:
Install the add-on card holder (FX5637K2) if necessary.
19V
1
4
3
10101 1
2
1
2
EAR-PHONERT
ANTENNA
D IN
OM4 SLOT OM2 LAN1 LAN2
OM1OM3 MIUSB ANTENNA
SYS
+12~24V -+12V
ARD
D IN
+
12~40V DODI
D
0
-101
3
FAST
2
1
2
LAN2
POWER BUTTONFAST DISPLAY2
ANTENNA DIGITAL I/O
RESET DISPLAY3USB LAN1 HDD

Version 1.3 FX5637 Series User’s Quick Reference Page 5/5
www.fabiatech.com ©2014-2017 FabiaTech orporation
11. Dimensions (in mm) an Front/Rear Panel Information of FX5637S2-ix 12. Dimensions (in mm) of FX5637S2 with Wall Mount Kit (FX5636K1)
End of Document
19V
1
4
3
10101 1
2
1
2
D IN OM1 USBOM3 MI ANTENNA
EAR-PHONELAN2LAN1OM2SLOTOM4RTANTENNA
+12~24V
D IN
ARD
+12V
-
SYS
+
12~40V DODI
D
0
-1 0 1
3
FAST
2
1
2
ANTENNA
RESET
DIGITAL I/O
USB DISPLAY3 HDD
POWER BUTTON
LAN1
DISPLAY2FAST
LAN2