Falconeyes LPW-600TD User manual

D) Specifications:
E) Attention
Thank you for purchasing FalconEyes’ products.
For further details of our related products, please contact your
local distributor or visit our webpage at www.falconeyes.com.cn
Thank you.
Please read this manual carefully before using this product.
E-mail: [email protected]
Website: www.falconeyes.com.cn
FM1709_LPW-600TD_LPW-1505TD_eng
1.Make sure the power is off after use.
2.Do NOT plug/unplug when the power is still connected.
3.Since there can be high voltage inside the unit, Do NOT open or repair the unit yourself. If
there is any defect, please contact an experienced technician.
4.Keep the environment dry and ventilated when using the product. Do not leave or use the
flash in humid or dusty environment.
5.For best performance of LEDs, maintain cleanliness of LEDS by wiping the surface softly
with clean cloth.
6.Do NOT apply pressure to the product.
7.Read this manual carefully before using the product.
3
Model no.：
No. of LED bulbs
Power
Color Temperature
LUX（LUX)
Baery Holder
Beam Angle 45°
Lamp Base
Dimensions (LxWxH)
LCD Display
Weight
LPW-600TD
600pcs x 0.06W
36w
U-Bracket
34x 23.5x 6.2cm
1.8kg
3000K-8000K（ Adjustable）
Color Filter
AC Adaptor SP-AC15(15V/5A)
√
√
Transparent & Orange
LPW-600TD / LPW-1505TD
LED Instruction Manual
Fig
13、
Fig
14、
3. Save function: 5 momery slots(A,B,C,D,E), save button and delete button are located at the
bottom of the apps
①
Save current setting to memory slots: choose the slots and then press save button.Recall
settings by press any memory slots for 2 seconds.
②Refer to Fig. 13, RED slot represents memory stored, BLUE represents slot memory is
recalling BLACK represent slots are free to store memory.
③Choose any memory slots then press delete button,
any stored data will be erased.
Ⅱ、
LED Display (Fig.14)
1. Turning the upper button to adjust Color Temperature of the light.
Pressing the upper button to switch between multi- light and
single-light mode(Press 3 s for multi-light mode, 6s for sing light-
mode)
2. Turning the lower button to adjust the brightness. Pressing the
lower button to enter or exit stand by mode.
3. Press the up and down arrows on the screen to adjust brightness
and color temperature respectively.
2M(735)/1M(2900)/0.5M(9950)
LPW-1505TD
150pcs x 0.5W
75w
2.2kg
3000K-8000K（ Adjustable）
SP-AC15(15V/7A)
2M(1330)/1M(5380)/0.5M(20200)
For Android
For IOS

B) Panel Diagram
A) Product Overview
12
Sony battery holder (SY)
LPW-TD series LED panel designed by Falcon Eyes Ltd. is equipped with
WiFi control function. With the smartphone apps, users can adjust the color
temperature and brightness of the light via their smart phones.The aluminum
housing provides strong protection to the light. Users can choose SONY or
Anton Bauer battery sockets. LED beads are with stable performance, long
lifespans and HIGH CRI of (~95Ra). Color temperature is adjustable from
3000K - 8000K and there is a touchable LCD screen at the back for users to
adjust color temperature and brightness directly.
1.Aluminum housing 7.CCT knob / reset button 12.U-Bracket
2.Color temperature 8.Switch 13. U-Bracket Base
3.Power socket 9.Fastening Knob 14.USB Receiver
4.USB receiver port 10.Brightness knob 15.Receiver cover
5.Fastening knob / Stand by button 16.RC-W01
6. Brightness 11.Power Socket 17.Indicating light
Ⅰ、Light control panel and USB WiFi receiver diagram
17
15
16
14
RC-W01
WiFi receiver
C) Operating Instructions
Anton Bauer battery
holder(AB)
1
2
37
8
4
5
6
9
10
11
12
13
14
15
16
Ⅱ、WiFi Apps operation
1.Indicating light
2.ID of lights
3.Memory slot
4.Light switch
5.Brightness
6.Color Temp.
7.Save
8.Delete
9. Light Scan
10.Back
11.Color Temp. (3rd screen)
12.Color Temp. adjustment area
13.Pre-set color temp.
14.Router setting
15.Status display
16. Brightness control
Fig6、Fig7、Fig8、Fig9、Fig10、Fig11、Fig12、
Ⅰ、LPW-TD + RC-W01 Operating Steps
1. Please make sure the WiFi application is installed on mobile phone. You can download from our
website or scan the QR code on the first page of the manual to download the apps.
2. Plug in power cable and RC-W01 WiFi receiver. Switch on the light and the indicating light on
the receiver should have lighted up. Turn on the WiFi function on mobile phone and start to
connect.
①Single Light mode: Search the WiFi network “LEDSxxxx” on your mobile phone and enter
password: candlehome to connect. Enter the WiFi app and the connected light should appear on
the control screen. (All RC-W01 receiver starts with the name LEDSxxxx and follow by 4 digits, e.g.
LEDS1234) (All RC-W01 receiver are pre-set with password : candlehome)
② A router is needed for multi-lights connection. Enter WiFi connection of the smartphone
and connect to a password protected router as Fig6. Enter WiFi app and then 2nd control
screen as Fig7 and Fig8. Click to enter Router setting as Fig9. (IOS system to enter
router name first and then password). Please press the Reset button (CCT knob) at the back
of the LED light for 3 seconds. The RC-W01 indicating light will twinkle rapidly and please
release the button now. (Please also do the same procedure for other LED lights). After 5 - 20
seconds, the indicating light stops twinkling. Click on the WiFi app to search for the
connected lights as Fig10. (IOS system needs not to click the icon, connected lights will
be displayed automatically). Click the light ID to enter 3rd control screen for adjustment. For
Multi-lights adjustment, Click to choose specific lights as Fig10 or uppper icon to
choose all lights as Fig12. Then entering any one of the light to 3rd screen allows multi-lights
adjustment at one time. (Please start from the begining if connection fails.)
Fig1、Fig2、Fig3、Fig4、Fig5、
Control panel
Connect LEDS5469 Enter password Enter 2nd screen Click ID to enter 3rd screen
Click ID to enter
3rd screen
Connect
LEDS5469 Enter 2nd screen Enter Router setting Enter password Light control screen Control screen
1
3
4
5
27
10
11
9
6
8
13
12