Falconeyes RFL-3 User manual

B) Accessories
C) Optional Accessories
A) Features
1
1
2
D) Control Panel
E) Operation
Power Cord Power Switch
Fuse
2
L shape Camera Bracket TMB-176L Camera Bracket
(Optional)
The lamp panel can be installed
on the light stand directly, or using
TB-U8 to connect with the light
stand (By employing the TB-U8,
the shooting angle can be
adjusted), as shown in the
pictures:
Using TB-U8 to install on
the stand ( Optional )
Install directly on the stand (3/8”)
The RFL-3 fluorescent ring light possesses unique appearance and
special light effect. The three fluorescent tubes create only little heat,
which is suitable for taking close-up shots and portrait.
The lamp body employs thermo stable and flame-resistant materials
which guarantee a secure usage. The light effect achieves stably without
shadows, constant color temperature, high Color Rendering Index (CRI),
and incredibly long service life.
The lamp panel comes with two
different camera brackets as
shown in the pictures.

IM1012_RFL-3_eng
G) Attentions
Instruction Manual
RFL-3
3
F) Specification
3
Please follow the labeled voltage instruction for power source.
For non-maintenance technician, please do not disassemble the product.
3-in-1
Fluorescent Ring Light
Do not connect or disconnect the lamp tube while the power cord is
plugged to the main. Uninstall the tube only when the power of the lighting
is switched off for more than 15 minutes to avoid scald.
Diffuser can be applied according to different shooting situation. And the Installation
method for the diffuser is shown as below:
Model No.
No. of Tubes
Power
Color Temperature
Voltage
Dmiension(WxLxH)
Central Aperture(mm)
Net Weight
Accessories Included
RFL-3
1 x 22W 1 x 28W 1 x 40W
5300K-5500K
Diffusor,Tilng Bracket(CLD-15),Camera Bracket
AC 110-120V 60Hz / AC 220-240V 50Hz
480 x 480 x 85mm
102
1.6Kg
3