FALMEC Nuvola Series User manual

INSTALLATION MANUAL
falmecau.com
Nuvola

2
CONGRATULATIONS
Congratulations and thank you for choosing
a Falmec rangehood.
To avoid the risks that are always present
when you use an electrical appliance it is
important that the rangehood is installed
correctly and that you read the safety in-
structions carefully to avoid misuse and ha-
zards.
We recommend that you keep this instruction
booklet for future reference and pass it on to
any future owners.
IMPORTANT INFORMATION
AFTER UNPACKING THE RANGEHOOD PLEASE REVIEW YOUR NEW ITEM TO ENSURE
THAT IT HASN’T BEEN DAMAGED IN TRANSIT OR IS MISSING ANY COMPONENTS.
FAILURE TO REPORT ANY ISSUE WITHIN 72 HOURS OF RECEIPT OF YOUR ITEM MAY
RESULT IN ADDITIONAL CHARGES.
ENVIRONMENTAL TIP
Information on disposal for users Most of the packing materials are recyclable.
Please dispose of those materials through your local recycling depot or by placing
them in a appropriate collection bin.
If you wish to discard this product, please contact your local authorities and ask for
the correct method of disposal.
TO AVOID THE RISK OF INJURY OR DAMAGE TO THE PRODUCT IT IS ESSENTIAL TO
READ THESE INSTRUCTIONS PRIOR TO INSTALLATION AND USE.

2
HOLE SIZES
940 - 1325
505 - 590
540 - 625
973 - 1358
925 - 1310
492 - 577
370
556 128
min 10/max 25
341
239
275
95
275
150
NUVOLA 90: 32 KG
NUVOLA 140: 45 KG
INSTALLATION WITH MOTOR ON THE HOOD

3
HOLE SIZES
940 - 1325
505 - 590
540 - 625
973 - 1358
216
472
min 10/max 25
128
925 - 1310
492 - 577
370
246
193
144
86
95
556 - 640
NUVOLA 90: 31 KG
NUVOLA 140: 44 KG
INSTALLATION WITH SLIM MOTOR

4
HOLE SIZES
940 - 1325
505 - 590
540 - 625
973 - 1358
925 - 1310
492 - 577
370
556
128
min 10/max 25
275 275
86
216
193
95
144
NUVOLA 90: 24 KG
NUVOLA 140: 37 KG
INSTALLATION WITH CONVEYOR KIT AND REMOTE MOTOR

5
HOLE SIZES
940 - 1325
505 - 590
min 10/max 25
128 540 - 625
973 - 1358
95
925 - 1310
492 - 577
150
130
NUVOLA 90: 22 KG
NUVOLA 140: 35 KG
INSTALLATION WITH REMOTE MOTOR

6
Max 1500 mm
ø9 mm
MEASUREMENTS FOR
INSTALLATION

7
FALSE CEILING
CONTROSOFFITTO
2
min.
60 mm
min.
60 mm
1
FALSE CEILING
CONTROSOFFITTO
G
3
4
double adhesive
2
1
H
H
√
x
1
2
Cutting the plasterboard (1), inserting the
supporting frame (2)
PRELIMINARY
OPERATIONS

8
X
Y
X
1
2
Y
4
3
Ø9
mm
3
Fixing the mandatory safety chains to the ceiling.
PRELIMINARY OPERATIONS

9
Open the panel, remove the filters (4) and gas piston (5).
1
4
2
3
2
1
4
5
PRELIMINARY OPERATIONS

10
INLET
1 2
3
Remove the flange from the hood (1) and
the motor (2). If the air outlet is upward, see (3).
For other directions, see (4) and (5).
INSTALLATION WITH MOTOR ON THE HOOD

11
5
4
AIR
180°
3
4
90°
5
x 8
6
x 8
2
1OUTLET
INSTALLATION WITH MOTOR ON THE HOOD
Side movement of the air exhaust

12
120 mm
x8
x4
1
3
1
2
3
6
INSTALLATION WITH MOTOR ON THE HOOD

13
7
12
8
INSTALLATION WITH MOTOR ON THE HOOD
Fixing the motor support brackets(7)
Positioning the motor on the
support frame (8)

14
ø 15
950
m3/h
1100
m3/h
150mm
1
2
3
9
INSTALLATION WITH MOTOR ON THE HOOD
Fitting the suction pipe and electrical connection (9).

15
2
1
1
2
Remove the flange from the hood (1).
Detach pre-cut elements and position
the slim motor bracket
SLIM MOTOR

16
AIR
145,5
SLIM
L
M
2
1
3V
1(x8)
4V2 (x4)
3
Fixing the motor support brackets (3).
SLIM MOTOR INSTALLATION

17
1
2
L
M
H
G
SLIM
217mm
87mm
800
m3/h
1
2
3
4
5
Positioning the motor on the support frame (4).
Fitting the suction pipe and electrical connection (5).
SLIM MOTOR INSTALLATION

18
120 mm
AIR
AIR
3
4
22
V2 (x4)
V1 ( x 8 )
120 mm
3V1 (x8)
4
V2 (x4)
2
1
Remove the ange from the hood (1).
Fixing the brackets onto the rectangular
connection (2).
INSTALLATION WITH CONVEYOR KIT AND REMOTE MOTOR

19
1
2
L
CT
M
H
G
3
1
217mm
87mm
CUE 2
4
Positioning the rectangular connection on the support frame (3).
Fitting the suction pipe (4).
INSTALLATION WITH CONVEYOR KIT AND REMOTE MOTOR