Fein AStlxe 638 Quick start guide

SERVICE
Tool service and maintenance must be performed only by qualified
repair personnel.
When servicing a tool, only use identical replacement parts available
from FEIN.
Repairs on FEIN Power Tools required the use of special tools (pulling devices
and bearing press). Authorized repair centers have trained repair technicians
andequipmentnecessarytoper-formtheserepairs.Serviceorrepairsperformed
by unqualified persons could result in operator injury.
For the location of the repair center near you, please call 1-800-441-9878.
Monday thru Friday, 9AM to 5PM EST. Or, look on our web site at
www.feinus.com and follow the link to “AuthorizedWarranty Repair Centers”
Phone: [phone] Fax: [phone] Toll Free: 1-800-441-9878
FEIN Power Tools
1030 Alcon Street
Pittsburgh, PA 15220
November 24, 2003
AStlxe 638
Special Cutter

Fein Power Tools
Astlxe 638 Special Cutter - Parts Lis
t
Item Item Numbe
r
Description Reqd
10 3-19-01-093-00-0 MOTOR HOUSING 1
20 3-28-05-128-00-3 TRIGGER 1
30 3-28-16-049-00-0 SWITCH LEVER 1
40 5-1-268-001-11-2 FIELD COIL 1
50 4-30-70-004-00-1 SCREW 1
70 3-14-28-075-00-7 AIR CONDUCTING RING 2
80 3-07-19-448-01-7 CONNECTION CABLE 2
100 3-07-62-242-02-9 SPEED CONTROL 1
110 3-09-02-040-00-4 SPRING 1
120 3-07-12-095-01-7 BRUSH HOLDER 2
130 3-07-11-140-00-0 CARBON BRUSH 2
140 3-24-31-036-00-8 CABLE BRIDGE 1
150 3-07-07-101-01-2 CABLE 1
160 3-14-13-007-00-7 STRAIN RELEASE 1
170 3-12-01-072-01-4 COVER 1
171 3-14-15-065-00-2 CUSHION 1
180 4-30-70-001-00-6 SCREW 2
210 3-07-19-340-02-4 CONNECTION CABLE 2
250-270 5-3-268-001-11-4 ARMATURE 1
260 3-34-05-031-00-9 PINION 1
270 4-30-64-001-99-3 SCREW 3
300 3-15-06-309-00-3 INTERMEDIATE PLATE 1
320 3-15-08-227-00-1 GEARHOUSING 1
330 3-32-18-057-00-7 LEVER 1
340 4-17-06-033-00-3 NEEDLE BEARING 1
350 3-23-13-045-01-2 PISTON 1
360 4-02-38-017-00-4 CLAMPING SLEEVE 1
370 3-05-07-180-00-8 BUSHING 1
380 4-17-05-022-00-5 NEEDLE BEARING 1
390 3-34-06-247-00-4 OUTPUT SHAFT 1
400 4-06-12-129-00-1 O RING 1
410 4-17-01-007-03-8 BALL BEARING 1
420 4-06-08-054-00-9 SEAL 1
430 3-05-09-041-00-0 THREADED SLEEVE 1
500 4-17-01-004-24-6 BALL BEARING 1
510 4-17-01-001-17-2 BALL BEARING 1
520 3-26-03-035-00-2 BALANCING RING 1
530 3-14-28-076-01-9 MAGNET RING 1
540 4-06-12-089-00-6 O RING 1
550 4-06-08-059-00-2 SEAL 1
560 4-06-12-088-00-2 O RING 1
610 3-30-24-062-00-4 CLAMPING BOLT 1
620 4-30-70-007-00-2 SCREW 4
630 4-30-70-004-00-1 SCREW 2