Fein Special Cutter FSC 1.6 Quick start guide

SERVICE
Toolserviceandmaintencancemustbeperformedonlybyqualified
repairpersonnel.
When servicing a tool, only use identical replacement parts available
from FEIN.
Repairs on FEIN Power Tools required the use of special tools (pulling devices
and bearing press). Authorized repair centers have trained repair technicians
andequipmentnecessaryto per-formthese repairs.Service orrepairs performed
by unqualified persons could result in operator injury.
For the location of the repair center near you, please call 1-800-441-9878.
Monday thru Friday, 9AM to 5PM EST. Or, look on our web site at
www.feinus.com and follow the link to “Authorized Warranty Repair Centers”
Phone: [phone] Fax: [phone] Toll Free: 1-800-441-9878
FEIN Power Tools
1030 Alcon Street
Pittsburgh, PA 15220
March 1, 2005
FSC 1.6
Special Cutter

Fein Power Tools
FSC 1.6 Parts List
Item Item Numbe
r
Descriptio
n
Reqd.
10 3-19-01-139-01-5 MOTOR HOUSING - FSC 1
20 3-28-05-195-00-1 SWITCH SLIDE - FSC 1
30 3-28-16-060-00-1 SWITCH ROD - FSC 1
40 5-1-274-006-11-4 FIELD COIL - FSC - 110V 1
50 4-30-70-014-00-0 SCREW 2
60 3-14-28-151-00-9 AIR CONDUCTING RING - FSC 1
80 3-28-05-194-01-6 SPEED BUTTON SET - FSC 1
90 3-24-27-120-01-1 COVER REPAIR SET - FSC 1
100 3-07-62-266-99-1 ELECTRONIC - FSC - 110V 1
110 3-07-19-619-01-3 CONNECTION CABLE - FSC 1
120 3-24-31-044-00-0 CABLE CLAMP - FSC 1
130 3-24-31-043-00-2 CLAMP BRIDGE - FSC 1
140 4-30-70-038-00-7 SCREW - FSC 5
150 3-14-13-225-00-3 PROTECTIVE SLEEVE - FSC 1
165 3-07-07-101-01-2 CABLE-16GA 10FT W/MOLDED PLUG 1
175 3-07-12-091-02-4 BRUSH HOLDER SET - FSC 1
180 3-07-11-146-00-1 CARBON BRUSH - FSC 2
200 4-30-41-040-04-8 SCREW 1
210 3-14-15-095-00-9 PLUG 2
255 5-3-274-010-11-4 ARMATURE - FSC 1.6 - 110V 1
260 4-17-01-001-03-2 BEARING 1
270 3-14-28-152-00-2 MAGNET - FSC 1
280 4-17-01-007-03-8 BALL BEARING 1
290 3-26-03-036-00-5 BALANCING RING - FSC 1
405 3-15-08-253-01-8 GEAR HOUSING - FSC 1
410 3-15-06-369-01-6 INTERMEDIATE HOUSING 1
420 3-32-18-119-00-2 LEVER - FSC 1
430 3-34-06-296-00-5 DRIVE SHAFT - FSC 1
440 3-05-07-234-01-0 BUSHING - FSC 1
500 4-17-06-041-00-5 NEEDLE BEARING - FSC 1
510 3-09-01-359-00-7 SPRING - FSC 2
530 4-17-01-010-05-4 BALL BEARING 1
550 4-06-12-024-00-9 SEALING RING - FSC 1
560 4-06-12-093-00-4 O-RING 1
570 3-06-10-035-00-2 SEAL - FSC 1
580 4-06-08-072-00-5 SEALING RING - FSC 1
600 4-26-16-027-00-9 SECURING RING 1
610 4-24-46-016-00-3 WASHER - FSC 1
620 4-30-74-001-00-0 SCREW - FSC 4
630 3-30-01-039-01-7 NUT ASSY - FSC 1.6 1