Fein MF 12-180 Quick start guide

SERVICE
Tool service and maintenance must be performed only by qualified
repair personnel.
When servicing a tool, only use identical replacement parts available
from FEIN.
Repairs on FEIN Power Tools required the use of special tools (pulling devices
and bearing press). Authorized repair centers have trained repair technicians
andequipmentnecessarytoper-formtheserepairs.Serviceorrepairsperformed
by unqualified persons could result in operator injury.
For the location of the repair center near you, please call 1-800-441-9878.
Monday thru Friday, 9AM to 5PM EST. Or, look on our web site at
www.feinus.com and follow the link to “AuthorizedWarranty Repair Centers”
Phone: [phone] Fax: [phone] Toll Free: 1-800-441-9878
FEIN Power Tools
1030 Alcon Street
Pittsburgh, PA 15220
Nov. 24, 2004
MF 12-180
Dustless Construction Cutter

FEIN Power Tools
MF 12-180 Parts Lis
t
Item Item Numbe
r
Description Reqd
10 3-24-31-021-00-7 CABLE CLAMP 1
20 4-30-70-001-00-6 SCREW 2
30 3-24-31-040-00-6 SUPPORT 1
40 3-07-62-216-99-6 ELECTRONIC 1
50 4-17-01-001-17-2 BALL BEARING 1
60 3-07-12-088-02-9 BRUSH HOLDER 2
70 3-07-11-136-00-2 BRUSH 2
80 4-30-70-018-00-9 SCREW 4
90 3-19-01-114-01-4 MOTOR HOUSING 1
100 5-3-273-001-11-7 ARMATURE 1
110 3-14-28-118-00-7 AIR CONDUCTING RING 1
120 3-24-16-098-00-5 COVER PLATE 1
140 4-30-70-007-00-2 SCREW 4
200 3-12-06-110-01-5 GEAR HOUSING 1
210 4-17-05-019-00-1 NEEDLE BEARING 1
220 3-09-01-032-00-3 SPRING 1
230 3-02-17-327-00-3 PIN 1
240 4-06-12-137-00-8 SEALING RING 1
250 3-28-05-185-00-2 BUTTON 1
260 3-24-19-115-00-
6
BEARING PLATE 1
270 3-34-06-284-00-9 SHAFT 1
280 4-17-01-010-05-4 BALL BEARING 1
290 3-24-16-101-00-9 COVER PLATE 1
305 3-38-09-229-01-2 BEVEL GEAR ASSY 1
320 3-26-24-117-00-9 WASHER 1
330 4-24-43-003-04-3 LOCK WASHER 4
450 4-17-01-007-22-6 BALL BEARING 1
480 3-28-05-156-00-8 SLIDING SWITCH 1
490 5-1-273-001-11-5 FIELD COIL 1
500 4-30-70-017-00-1 SCREW 2
510 3-28-16-055-00-0 SWITCH BAR 1
520 3-28-16-052-00-4 SWITCH ROD 1
530 4-30-41-039-99-9 SCREW 2
540 3-07-01-218-00-3 SWITCH 1
550 3-12-01-100-00-9 COVER 1
560 3-14-15-082-00-4 BOLSTER 1
570 3-14-13-007-00-7 CABLE PROTECTIVE SLEEVE 1
580 3-07-05-035-01-3 CABLE 1
700 6-38-01-178-00-4 INNER FLANGE 1
710 3-13-36-017-00-7 GUARD MOUNTING SPACER 1
730 4-30-35-010-04-6 SCREW 1
740 3-13-36-010-00-2 BLADE SLIDE PLATE 1

750 3-13-36-011-00-1 DEPTH STOP ROD 1
760 4-20-01-007-05-3 NUT 1
770 3-13-36-012-00-4 SLEEVE 1
780 4-30-35-013-05-8 SCREW 1
790 3-13-36-013-00-8 WASHER 1
800 3-13-36-014-00-6 SLEEVE 1
810 3-13-36-015-00-0 THUMB SCREW 1
820 3-13-36-002-01-4 BLADE GUARD WITH VAC ATTACHMENT 1
830 3-13-36-006-00-4 EDGE CAP 1
840 3-13-36-007-00-8 SCREW 2
850 3-13-36-008-00-6 SCREW 2
860 3-13-36-003-00-9 LOCKING TAB 1
870 3-13-36-020-00-1 WASHER 3
880 3-13-36-005-00-1 SCREW 3
890 3-13-36-004-00-7 SCREW 2
900 3-13-36-016-00-3 SPRING 1
910 6-35-02-146-01-1 SAW BLADE 1
920 4-30-69-005-04-4 SCREW SHOE 4
930 3-13-36-009-00-0 GUARD COVER 1
940 3-13-36-018-01-4 HANDLE ASSY 1
950 3-13-36-019-00-9 SCREW 2
960 4-30-35-008-04-0 SCREW 4