Fein SuperCut FSC 2.0-SC Quick start guide

SERVICE
Tool service and maintenance must be performed only by qualified
repair personnel.
When servicing a tool, only use identical replacement parts available
from FEIN.
Repairs on FEIN Power Tools required the use of special tools (pulling devices
and bearing press). Authorized repair centers have trained repair technicians
andequipmentnecessarytoper-formtheserepairs.Serviceorrepairsperformed
by unqualified persons could result in operator injury.
For the location of the repair center near you, please call 1-800-441-9878.
Monday thru Friday, 9AM to 5PM EST. Or, look on our web site at
www.feinus.com and follow the link to “AuthorizedWarranty Repair Centers”
Phone: [phone] Fax: [phone] Toll Free: 1-800-441-9878
FEIN Power Tools
1030 Alcon Street
Pittsburgh, PA 15220
February 15, 2006
FSC 2.0-SC
SuperCut

Fein Power Tools
FSC 2.0-SC Parts List
Item Item Number Description Reqd
10 3-19-01-139-01-5 MOTOR HOUSING 1
20 3-28-05-195-00-1 SWITCH SLIDE 1
30 3-28-16-060-00-1 SWITCH ROD 1
40 5-1-274-006-11-4 FIELD COIL - 110V 1
50 4-30-70-014-00-0 SCREW 2
60 3-14-28-151-00-9 AIR CONDUCTING RING 1
80 3-28-05-194-01-6 SPEED BUTTON SET 1
90 3-24-27-120-01-1 COVER REPAIR SET 1
100 3-07-62-266-99-1 ELECTRONIC - 110V 1
110 3-07-19-619-01-3 CONNECTION CABLE 1
120 3-24-31-044-00-0 CABLE CLAMP 1
130 3-24-31-043-00-2 CLAMP BRIDGE 1
140 4-30-70-038-00-7 SCREW 5
150 3-14-13-225-00-3 PROTECTIVE SLEEVE 1
165 3-07-07-101-01-2 CABLE 1
175 3-07-12-091-02-4 BRUSH HOLDER SET 1
180 3-07-11-146-00-1 CARBON BRUSH 2
200 4-30-41-040-04-8 SCREW 1
210 3-14-15-095-00-9 PLUG 2
255 5-3-274-011-11-3 ARMATURE - FSC 2.0 - 110V 1
260 4-17-01-001-03-2 BEARING 1
270 3-14-28-152-00-2 MAGNET 1
280 4-17-01-007-03-8 BALL BEARING 1
290 3-26-03-037-00-9 BALANCING RING - FSC 2.0 1
405 3-15-08-253-01-8 GEAR HOUSING 1
410 3-15-06-369-02-2 INTERMEDIATE HOUSING - FSC 2.0 1
420 3-32-18-119-00-2 LEVER 1
430 3-34-06-296-00-5 DRIVE SHAFT 1
440 3-05-07-234-01-0 BUSHING 1
500 4-17-06-041-00-5 NEEDLE BEARING 1
510 3-09-01-359-00-7 SPRING 2
520 4-17-05-039-00-9 NEEDLE BEARING 1
530 4-17-01-010-05-4 BALL BEARING 1
550 4-06-12-024-00-9 SEALING RING 1
560 4-06-12-093-00-4 O-RING 1
570 3-06-10-035-00-2 SEAL 1
580 4-06-08-072-00-5 SEALING RING 1
600 4-26-16-027-00-9 SECURING RING 1
610 4-24-46-016-00-3 WASHER 1
620 4-30-74-001-00-0 SCREW 4
630 3-30-01-039-01-7 BLADE SCREW 1