Fein ABS 14 Setup guide

ABS 14; ABS 18; ASB 14; ASB 18
Repair instructions
C-SC_CSSM
Version 1.0
19.09.2013
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation.
Page 1of 33
ABS 14; ABS 18
ASB 14; ASB 18

ABS 14; ABS 18; ASB 14; ASB 18
Contents
C-SC_CSSM
Version 1.0
19.09.2013
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation.
Page 2of 33
1. Models described
2. Technical data
3. Notes and requirements
4. Tools required
5. Lubricants and auxiliary substances required
6. Disassembly
7. Assembly
8. Troubleshooting
9. Connection diagram

ABS 14; ABS 18; ASB 14; ASB 18
1. Models described
C-SC_CSSM
Version 1.0
19.09.2013
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation.
Page 3of 33
These instructions describe how to repair the following models:
Model Order number
ABS 14 7 113 18 00 95 0
ABS 18 7 113 19 00 94 0
ASB 14 7 104 06 00 95 0
ASB 18 7 104 06 00 94 0

ABS 14; ABS 18; ASB 14; ASB 18
2. Technical data
C-SC_CSSM
Version 1.0
19.09.2013
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation.
Page 4of 33
Technical data
The complete technical data can be found in the operating instructions for the model.
Test data
Up-to-date test data for all models can be found on the FEIN Extranet (Customer Service → Repair Guides).
Lubricants
The lubricants and container sizes available from FEIN can be found on the FEIN Extranet (Customer Service → Repair Guides).
Lists of spare parts
Lists of spare parts and exploded views are available online at www.fein.com

ABS 14; ABS 18; ASB 14; ASB 18
3. Notes and requirements
C-SC_CSSM
Version 1.0
19.09.2013
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation.
Page 5of 33
Note
These instructions are only intended for persons with suitable technical training. It is assumed that the reader has mechanical and
electrical training.
Only use original FEIN spare parts!
Requirements
Please note that power tools may only be repaired, maintained and checked by a trained electrician, as improper repair can result in
serious risks to the user.
The provisions set out in DIN VDE 0701-0702 should be observed after repairs.
The relevant accident prevention regulations of the employers’ liability insurance associations are to be observed when
commissioning.
The German Equipment and Product Safety Act applies for correct use.
Outside Germany, the regulations applicable in the relevant country must be observed!

ABS 14; ABS 18; ASB 14; ASB 18
4. Tools required
C-SC_CSSM
Version 1.0
19.09.2013
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation.
Page 6of 33
Standard tools
Torx T10
Hook
Cross-tip screwdriver
Socket wrench 10mm
Soldering rod
Torque wrench: 0.5 Nm – 24 Nm

ABS 14; ABS 18; ASB 14; ASB 18
5. Lubricants and auxiliary substances required
C-SC_CSSM
Version 1.0
19.09.2013
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation.
Page 7of 33
Auxiliary substances
Loctite 242
Note
Also refer to Extranet - Customer Service / Repair Guides / Auxiliary Substances

ABS 14; ABS 18; ASB 14; ASB 18
6. Disassembly
C-SC_CSSM
Version 1.0
19.09.2013
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation.
Page 8of 33
Disassembling battery
1. Press catch and pull battery off tool.
1

ABS 14; ABS 18; ASB 14; ASB 18
6. Disassembly
C-SC_CSSM
Version 1.0
19.09.2013
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation.
Page 9of 33
Disassembling quick-clamping drill chuck
1. Unscrew screw (left-handed thread) in quick-clamping drill chuck. Tools:
- Cross-tip screwdriver

ABS 14; ABS 18; ASB 14; ASB 18
6. Disassembly
C-SC_CSSM
Version 1.0
19.09.2013
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation.
Page 10 of 33
Disassembling quick-clamping drill chuck
1. Secure socket head screw wrench in quick-clamping drill chuck.
2. Use socket head screw wrench to unscrew quick-clamping drill chuck from gearbox. Tools:
- Socket head screw
wrench
size 10