Fema Electronica migan FI User manual

microSYST Systemelectronic GmbH, Zur Centralwerkstätte 10, D-92637 Weiden
Tel. [phone], Fax [phone], www.microsyst.de, [e-mail]
migan FI
Large Display Numeric LED with Profibus DP Interface
User’s Manual
Distribuidor en España :
FEMA ELECTRÓNICA, SA
Pol. Ind. Santiga –Altimira 14 (T14 N2)
08210 Barberà del Vallès –BARCELONA
Tel. [phone] –[e-mail]
Fax [phone] –www.fema.es

migan FI
Large Display Numeric LED with Profibus DP Interface
Page 2
microSYST Systemelectronic GmbH, Zur Centralwerkstätte 10, D-92637 Weiden
Tel. [phone], Fax [phone], www.microsyst.de, [e-mail]
Table of Contents
1GENERAL 4
1.1 Display Functions 4
2APPLICATION EXAMPLE 5
3TECHNICAL DATA 6
3.1 Notes for the start-up 6
3.2 Device Configuration 7
3.3 Device or System Start-Up 8
3.4 Profibus DP Characteristic Data 9
3.5 Profibus DP 10
3.5.1 Configuration Data - Config_Data 10
3.5.2 Pararmeters Configuration Data - User_Prm_Data 11
3.5.3 User Data - Output_Data 11
3.5.4 Control Data 11
3.5.5 Control Byte 0 - Toggle Byte (TB) 11
3.5.6 Control Byte Byte 1 - Length Byte (LB) 11
3.5.7 Interface Data 12
3.6 Transmission Protocol 12
3.7 Example of Controlling 14
4CONNECTOR PIN ASSIGNMENTS 15
4.1 Profibus DP Address 17
5HOUSING DIMENSIONS 19
6APPENDIX 20
6.1 Standard Equipment 20
6.2 Optional Accessories 20

migan FI
Large Display Numeric LED with Profibus DP Interface
Page 3
microSYST Systemelectronic GmbH, Zur Centralwerkstätte 10, D-92637 Weiden
Tel. [phone], Fax [phone], www.microsyst.de, [e-mail]
6.3 Order Numbers 20
6.4 Displayable Characters 21
6.5 Maintenance and Care 22
6.6 Declaration of Conformity 23
6.7 Guarantee 24
6.8 Versions Overview 25

migan FI
Large Display Numeric LED with Profibus DP Interface
Page 4
microSYST Systemelectronic GmbH, Zur Centralwerkstätte 10, D-92637 Weiden
Tel. [phone], Fax [phone], www.microsyst.de, [e-mail]
1 General
The large display numeric LED can be used universally for displaying
production data, or as an information board.
The modular design allows for cost-effective models of various size, and
with different character heights and numbers of digits.
Thus integration into existing equipment or systems is easy and simple.
1.1 Display Functions
•Data transmission: Profibus-DP
•Simple parameter setting and initial start-up
•Variable size thanks to modular display design.

migan FI
Large Display Numeric LED with Profibus DP Interface
Page 5
microSYST Systemelectronic GmbH, Zur Centralwerkstätte 10, D-92637 Weiden
Tel. [phone], Fax [phone], www.microsyst.de, [e-mail]
2 Application Example
Schematic diagram of the display unit at the interface:
Profibus-DP
Numeric
Display
Large Display Numeric LED with Profibus-DP-Interface
Profibus-DP-Master

migan FI
Large Display Numeric LED with Profibus DP Interface
Page 6
microSYST Systemelectronic GmbH, Zur Centralwerkstätte 10, D-92637 Weiden
Tel. [phone], Fax [phone], www.microsyst.de, [e-mail]
3 Technical Data
Overall Specifications
Display type: 7 segment LED
Character height: 60 mm (2.36’’), 100 mm (3.94’’), 150 mm (5.91’’),
200 mm (7.87 ‘’), 250 mm (9.84’’)
Digits: 1 to 15
Display color: red, green, yellow
Character set: see chapter “Displayable Characters”
View: single or double sided
Interface: Profibus-DP
Baud rate: 9.6 KBaud to 12 MBaud
Addresses: 1 to 127
Operating voltage: 230 V / 50 Hz, 110 V / 60 Hz or 24 VDC
Power Consumption: 60 mm (2.36’’) approx. 1.3 W per digit
100 mm (3.94’’) approx. 2.5 W per digit
150 mm (5.91’’) approx. 7.0 W per digit
200 mm (7.87’’) approx. 7.5 W per digit
250 mm (9.84’’) approx. 10.0 W per digit
Housing: industrial version, powder coated aluminium
Housing dimensions: see chapters “Device Configuration” and “Housing Dimensions”
Mounting: articulated arm or hanging mount
bracket for wall mounting
Protection: IP54 or IP65
Operating temp.: 0 to +50 °C
Storage temp.: -25 to +70 °C
3.1 Notes for the start-up
•When putting on the power supply, the following sequence has to be ob-
served:
oConnect the power supply cable to the display.
oConnect the power supply cable to the power supply.
•When disconnecting the power supply, the following sequence has to be
observed:
oDisconnect the power supply cable from the power supply.
oDisconnect the power supply cable from the display.

migan FI
Large Display Numeric LED with Profibus DP Interface
Page 7
microSYST Systemelectronic GmbH, Zur Centralwerkstätte 10, D-92637 Weiden
Tel. [phone], Fax [phone], www.microsyst.de, [e-mail]
3.2 Device Configuration
Character Height:
60 mm 100 mm 150 mm 200 mm 250 mm
2.36’’ 3.94’’ 5.91’’ 7.87’’ 9.84’’
Number of Lines:
________
Number of digits per Line:
1 2 3 4 5 6 7 8 9 10
11 12 13 14 15
Display colour:
red green yellow
Dimensional display:
Line 1: __________ Line 5: __________
Line 2: __________ Line 6: __________
Line 3: __________ Line 7: __________
Line 4: __________ Line 8: __________
View:
single sided double sided
Operating voltage:
230 V / 50 Hz 110 V / 60 Hz 24 V DC
Protection:
IP54 IP65
Temperature range:
0 to +50 °C -25 to +50 °C
Housing dimensions: _________x_________x_________mm
_________x_________x_________inches
Housing colour: RAL _____________
Housing material: Aluminium profile
Stainless steel
Sheet material

migan FI
Large Display Numeric LED with Profibus DP Interface
Page 8
microSYST Systemelectronic GmbH, Zur Centralwerkstätte 10, D-92637 Weiden
Tel. [phone], Fax [phone], www.microsyst.de, [e-mail]
3.3 Device or System Start-Up
The large display numeric LED performs internal memory and function
tests while powering up.
The following data appear at the large format display:
•Baud rate
•Parity
•Data bits
•Stop bits
•- 1 2 3 4 5 ...
•Address.
The displayed values are of no significance for the Profibus DP
user.
After powering up, the display waits for valid parameter, configuration
and user data from the Profibus DP master. If no valid user data are
available, the following message appears at the numeric display:
„no-dP“.

migan FI
Large Display Numeric LED with Profibus DP Interface
Page 9
microSYST Systemelectronic GmbH, Zur Centralwerkstätte 10, D-92637 Weiden
Tel. [phone], Fax [phone], www.microsyst.de, [e-mail]
3.4 Profibus DP Characteristic Data
ID Number: 0x4097
Maximum Output Data: 24 Byte DP output data
Configuration: 2 flag bytes (0x27, 0x27) or
3 flag bytes (0x27, 0x27, 0x27)
Parameter Data: Standard 7 Byte
User PRM: none
Diagnosis: Standard 6 Byte
External Diagnosis: none
Transmission Speed: 9.6 kBaud / 19.2 kBaud / 93.75 kBaud /
187.5 kBaud / 500 kBaud / 1.5 MBaud /
3 MBaud, 6 MBaud, 12 MBaud
Protocol: Profibus DP DIN19245, part 3
GSD Data: IFGA.GSD

migan FI
Large Display Numeric LED with Profibus DP Interface
Page 10
microSYST Systemelectronic GmbH, Zur Centralwerkstätte 10, D-92637 Weiden
Tel. [phone], Fax [phone], www.microsyst.de, [e-mail]
3.5 Profibus DP
Communications between the Profibus master and the large format nu-
meric display are accomplished by means of cyclical data transfer. The
display has been designed for use with an output data width ranging
from 10 to 24 bytes (according to the number of digits), and no input
data. Output data width is selected during configuration.
3.5.1 Configuration Data - Config_Data
Configuration of the large format display is performed with 2 resp. 3 flag
bytes (according to the number of digits). The flag used for this purpose
is set to 8 bytes output, without consistency (DP standard 19245, part 3
= 0x27).
Data length for subsequent transmission of user data is determined
based upon the selection of configuration data.
Number of Digits Flag Bytes
1 to 7 2 x „8 Byte Output-Kennung“ (0x27, 0x27)
8 to 15 3 x „8 Byte Output-Kennung“ (0x27, 0x27, 0x27)
Notice:
If a flag byte unequal to the value 0x27 is transferred, a bus fault happens.

migan FI
Large Display Numeric LED with Profibus DP Interface
Page 11
microSYST Systemelectronic GmbH, Zur Centralwerkstätte 10, D-92637 Weiden
Tel. [phone], Fax [phone], www.microsyst.de, [e-mail]
3.5.2 Pararmeters Configuration Data - User_Prm_Data
The large format numeric display does not support any User_Prm_Data
(expanded parameters configuration data). Transferred parameters con-
figuration data from the User_Prm_Data area are checked for a zero
data length. If User_Prm_Data are transferred, initialisation of the
Profibus is disabled and the slave’s parameters must be reconfigured.
3.5.3 User Data - Output_Data
The large numeric display supports up to 24 bytes of output data. Output
data are subdivided into 2 bytes of control data, and up to 22 bytes of in-
terface data.
•2 bytes control data
•max. 22 bytes interface data
3.5.4 Control Data
Interface control for the large format numeric display is accomplished by
means of the first two bytes of output data.
3.5.5 Control Byte 0 - Toggle Byte (TB)
The first byte of output data is saved to intermediate memory at the dis-
play unit immediately after Profibus initialisation has been completed,
and is then always compared with the current content of the first output
data. As soon as the value of the first byte of output data has changed,
subsequent output data are evaluated and transfer of interface data to
the large format display is started as required. The only evalution crite-
rion is a change of content: the content itself is irrelevant. After changing
the toggle byte you must wait at least 30 ms for the next change.
3.5.6 Control Byte Byte 1 - Length Byte (LB)
The second byte of output data indicates the number of data bytes which
are to be transmitted to the large format display. Length is the equal to
the sum of all interface data bytes (as of byte 3).

migan FI
Large Display Numeric LED with Profibus DP Interface
Page 12
microSYST Systemelectronic GmbH, Zur Centralwerkstätte 10, D-92637 Weiden
Tel. [phone], Fax [phone], www.microsyst.de, [e-mail]
3.5.7 Interface Data
The large display numeric LED is ready for receipt of interface data start-
ing with byte 3. Interface data are transferred in accordance with the
number of bytes indicated by control byte 1, after a change has occurred
to the content of control byte 0.
3.6 Transmission Protocol
Display Data Positioning:
The first transmitted character is displayed at position 1.
(Data are entered to the display from left to right.)
Protocol:
TB LB STX ADRH ADRL P1 P2 P3 DB1...DB15 ETX
TB: XXH(toggle byte)
LB: 08Hto 16H (08Dto 22D)
(length byte for subsequent user data)
STX: 3CH(start transmission)
ADRH: 30H(display address, High, firmly oriented)
ADRL: 31H(display address, Low, firmly oriented)
P1: XXH(point byte 1)
P2: XXH(point byte 2)
P3: XXH(point byte 3)
DB1-15: Data (1 to 15 ASCII characters)
ETX: 3EH(end of transmission).
...

migan FI
Large Display Numeric LED with Profibus DP Interface
Page 13
microSYST Systemelectronic GmbH, Zur Centralwerkstätte 10, D-92637 Weiden
Tel. [phone], Fax [phone], www.microsyst.de, [e-mail]
Point Byte Coding:
If a decimal point is required, the corresponding bit must be set to 1.
Point byte 1: 0 1 0 X X X X X
Point at digit 5
Point at digit 4
Point at digit 3
Point at digit 2
Point at digit 1
Point byte 2: 0 1 0 X X X X X
Point at digit 10
Point at digit 9
Point at digit 8
Point at digit 7
Point at digit 6
Point byte 3: 0 1 0 X X X X X
Point at digit 15
Point at digit 14
Point at digit 13
Point at digit 12
Point at digit 11
Point bytes 1 to 3 must always be transmitted, even if no decimal point is
required. Point bytes P1 to P3 have a value of 40H.

migan FI
Large Display Numeric LED with Profibus DP Interface
Page 14
microSYST Systemelectronic GmbH, Zur Centralwerkstätte 10, D-92637 Weiden
Tel. [phone], Fax [phone], www.microsyst.de, [e-mail]
3.7 Example of Controlling
Guideline:
•4-digit display ( →flag bytes: 0x27, 0x27)
•Output of the characters „1 2 3 4“, then
•Output of the characters „8. 8. 8. 8.“
Sequence Control Frame (hex)
1. Start of the Profibus
DP communication 00 00 00 00 00 00 00 00 00 00 00 00 00
2. Input the frame data 00 0B 3C 30 31 40 40 40 31 32 33 34 3E
3. Transmit the frame 01 0B 3C 30 31 40 40 40 31 32 33 34 3E
4. Wait for transmission
(30 ms at least) 01 0B 3C 30 31 40 40 40 31 32 33 34 3E
5. Input next frame data 01 0B 3C 30 31 5E 40 40 38 38 38 38 3E
6. Transmit the frame 02 0B 3C 30 31 5E 40 40 38 38 38 38 3E

migan FI
Large Display Numeric LED with Profibus DP Interface
Page 15
microSYST Systemelectronic GmbH, Zur Centralwerkstätte 10, D-92637 Weiden
Tel. [phone], Fax [phone], www.microsyst.de, [e-mail]
4 Connector Pin Assignments
9-Pole Sub-D Female Connector
PIN Profibus-DP
1 n.c.
2 n.c.
3 Rx+ (higher voltage)
4 RTS
5 GND electrically isolated
6 5 VDC electrically isolated
7 n.c.
8 Rx- (lower voltage)
9 n.c.

migan FI
Large Display Numeric LED with Profibus DP Interface
Page 16
microSYST Systemelectronic GmbH, Zur Centralwerkstätte 10, D-92637 Weiden
Tel. [phone], Fax [phone], www.microsyst.de, [e-mail]
7-Pole Mains Plug (230 VAC)
3-Pole Circular Connector (24 VDC, optional)
PIN Allocation
1 L1
2 N
(PE) PE
PIN Allocation
1 GND
2 + 24 VDC
3 PE

migan FI
Large Display Numeric LED with Profibus DP Interface
Page 17
microSYST Systemelectronic GmbH, Zur Centralwerkstätte 10, D-92637 Weiden
Tel. [phone], Fax [phone], www.microsyst.de, [e-mail]
4.1 Profibus DP Address
LED 1, RUN Power-up: Illuminated
Normal operation: Blinks at approx.
2Hz
Error: Continuously
illuminated or off
LED 2, ERROR Power-up: Off
Normal operation:
Connection to DP master: Off
No connection: Illuminated
LED 3, BUS Power-up: Off
Normal operation:
Data transmission: Illuminated
No data transmission: Off

migan FI
Large Display Numeric LED with Profibus DP Interface
Page 18
microSYST Systemelectronic GmbH, Zur Centralwerkstätte 10, D-92637 Weiden
Tel. [phone], Fax [phone], www.microsyst.de, [e-mail]
10-Fold DIP-Switch (S1)
DIP-Switch ON OFF
DIP 1 DP-Adr. 201D0
DIP 2 DP-Adr. 212
D 0
DIP 3 DP-Adr. 224D 0
DIP 4 DP-Adr. 238D 0
DIP 5 DP-Adr. 2416 D 0
DIP 6 DP-Adr. 2532 D 0
DIP 7 DP-Adr. 2664 D 0
DIP 8 n.c. no function no function
DIP 9 Bus Terminatior
Profibus
active inactive
DIP 10 Bus Terminatior
Profibus
active inactive
10-Fold DIP-Switch (S2)
DIP-Switch ON OFF
DIP 1 n.c. no function no function
DIP 2 n.c. no function no function
DIP 3 n.c. no function no function
DIP 4 n.c. no function no function
DIP 5 n.c. no function no function
DIP 6 n.c. no function no function
DIP 7 reserved
DIP 8 reserved
DIP 9 reserved
DIP 10 reserved

migan FI
Large Display Numeric LED with Profibus DP Interface
Page 19
microSYST Systemelectronic GmbH, Zur Centralwerkstätte 10, D-92637 Weiden
Tel. [phone], Fax [phone], www.microsyst.de, [e-mail]
5 Housing Dimensions
mm:
Ziffernhöhe: 60 mm 100 mm 150 mm 200 mm 250 mm
BHTBHTBHTBHTBHT
Zeilen: 123 123 123 123 123
2 Stellen 305 202 238 338 87 305 202 345 488 87 368 238 418 597 87 440 338 618 898 87 620 338 618 898 87
3 Stellen 305 202 238 338 87 440 202 345 488 87 440 238 418 597 87 620 338 618 898 87 720 338 618 898 87
4 Stellen 305 202 238 338 87 440 202 345 488 87 620 238 418 597 87 720 338 618 898 87 920 338 618 898 87
5 Stellen 440 202 238 338 87 620 202 345 488 87 720 238 418 597 87 920 338 618 898 87 1080 338 618 898 87
6 Stellen 440 202 238 338 87 620 202 345 488 87 820 238 418 597 87 1080 338 618 898 87 1298 338 618 898 87
7 Stellen 440 202 238 338 87 720 202 345 488 87 920 238 418 597 87 1218 338 618 898 87 1559 338 618 898 87
8 Stellen 620 202 238 338 87 820 202 345 488 87 1080 238 418 597 87 1378 338 618 898 87 1698 338 618 898 87
9 Stellen 620 202 238 338 87 920 202 345 488 87 1180 238 418 597 87 1559 338 618 898 87 1898 338 618 898 87
10 Stellen 620 202 238 338 87 1080 202 345 488 87 1298 238 418 597 87 1698 338 618 898 87 2098 338 618 898 87
11 Stellen 620 202 238 338 87 1080 202 345 488 87 1559 238 418 597 87 1858 338 618 898 87 2298 338 618 898 87
12 Stellen 720 202 238 338 87 1180 202 345 488 87 1559 238 418 597 87 2047 338 618 898 87 2498 338 618 898 87
13 Stellen 720 202 238 338 87 1360 202 345 488 87 1658 238 418 597 87 2178 338 618 898 87 2698 338 618 898 87
14 Stellen 820 202 238 338 87 1360 202 345 488 87 1778 238 418 597 87 2338 338 618 898 87 2898 338 618 898 87
inches:
Char. height: 2,36'' 3,94'' 5,91'' 7,87'' 9,84''
BHTBHTBHTBHTBHT
Lines: 123 123 123 123 123
2 Digits 12 7,959,3713,33,43 12 7,9513,619,23,4314,59,3716,523,53,4317,313,324,335,43,4324,413,324,335,43,43
3 Digits 12 7,95 9,37 13,3 3,43 17,3 7,95 13,6 19,2 3,43 17,3 9,37 16,5 23,5 3,43 24,4 13,3 24,3 35,4 3,43 28,4 13,3 24,3 35,4 3,43
4 Digits 12 7,95 9,37 13,3 3,43 17,3 7,95 13,6 19,2 3,43 24,4 9,37 16,5 23,5 3,43 28,4 13,3 24,3 35,4 3,43 36,2 13,3 24,3 35,4 3,43
5 Digits 17,37,959,3713,33,4324,47,9513,619,23,4328,49,3716,523,53,4336,213,324,335,43,4342,513,324,335,43,43
6 Digits 17,37,959,3713,33,4324,47,9513,619,23,4332,39,3716,523,53,4342,513,324,335,43,4351,113,324,335,43,43
7 Digits 17,37,959,3713,33,4328,47,9513,619,23,4336,29,3716,523,53,43 48 13,324,335,43,4361,413,324,335,43,43
8 Digits 24,47,959,3713,33,4332,37,9513,619,23,4342,59,3716,523,53,4354,313,324,335,43,4366,913,324,335,43,43
9 Digits 24,47,959,3713,33,4336,27,9513,619,23,4346,59,3716,523,53,4361,413,324,335,43,4374,713,324,335,43,43
10 Digits 24,4 7,95 9,37 13,3 3,43 42,5 7,95 13,6 19,2 3,43 51,1 9,37 16,5 23,5 3,43 66,9 13,3 24,3 35,4 3,43 82,6 13,3 24,3 35,4 3,43
11 Digits 24,4 7,95 9,37 13,3 3,43 42,5 7,95 13,6 19,2 3,43 61,4 9,37 16,5 23,5 3,43 73,2 13,3 24,3 35,4 3,43 90,5 13,3 24,3 35,4 3,43
12 Digits 28,4 7,95 9,37 13,3 3,43 46,5 7,95 13,6 19,2 3,43 61,4 9,37 16,5 23,5 3,43 80,6 13,3 24,3 35,4 3,43 98,4 13,3 24,3 35,4 3,43
13 Digits 28,4 7,95 9,37 13,3 3,43 53,5 7,95 13,6 19,2 3,43 65,3 9,37 16,5 23,5 3,43 85,8 13,3 24,3 35,4 3,43 106 13,3 24,3 35,4 3,43
14 Digits 32,3 7,95 9,37 13,3 3,43 53,5 7,95 13,6 19,2 3,43 70 9,37 16,5 23,5 3,43 92,1 13,3 24,3 35,4 3,43 114 13,3 24,3 35,4 3,43

migan FI
Large Display Numeric LED with Profibus DP Interface
Page 20
microSYST Systemelectronic GmbH, Zur Centralwerkstätte 10, D-92637 Weiden
Tel. [phone], Fax [phone], www.microsyst.de, [e-mail]
6 Appendix
6.1 Standard Equipment
•Display unit with current software and hardware versions
•Square socket key
•User’s manual
•Mating plug
•Floppy disk with device database file for original owner.
6.2 Optional Accessories
•Square socket key
•User’s manual
•Floppy disk with device database file.
6.3 Order Numbers
Designation Order number
Square socket key G4-041
User’s manual (A4 format, German) X-M31-BSXX3X-002
User’s manual (A4 format, English) X-M32-BSXX3X-002