Fiilex FLXA029 User manual

DMX Connection Box
with Power Adapter Holder
User Manual

A
B
C
D
E
FG
H
I
J
Connection Plug
LCD Display
RJ45 Ports(In/Out)
5-Pin XLR Ports (In/Out)
Cable Storage Coil
A
B
C
D
E
Thumbwheel
Cable Clamp
Velcro Strap
Stand Fastener Knob
Power Adapter Holder
F
G
H
I
J
Getting To Know The DMX Connection Box

1
2
4
5
3
6

1 Attach the Power Adapter Holder (J) to the DMX
Connection Box via the two screws.
2 Attach entire unit to a tripod or light stand. Secure the
unit using the Stand Fastener Knob (I).
3 Slide the P360EX Power Adapter into the Holder (J),
and secure with the velcro strap (H).
4 Insert Connection Plug (A) into Light Control Input Jack
on the P360EX.
5 Connect to DMX controller via XLR5 (D) or RJ45 (C)
ports in the DMX Connection Box.
6 Rapidly push the Thumbwheel (F) two times to unlock.
When LCD Display (B) starts to flash, set the DMX
Address.
7 To set the DMX address, slide the Thumbwheel (F) up
to increase the number, and down to decrease.
8 Once set, push the Thumbwheel (F) one time to lock.
Set Up And Basic Operation
Setting the DMX Address