Fiilex P180E User manual

P180E
Portable LED Light
User Manual

What’s In The Box
Getting To Know The Light
Set Up And Basic Operation
Optional Accessories
Specifications
For Your Safety
1
2
4
7
8
9
Table of Contents

What’s In The Box
1
• 4 Leaf Barndoor• P180E Light with
Cold Shoe Mount w/ Stud
• Power Supply

2 3
Getting To Know The Light
D
B
C
I
KL
J
F
G
H
EA
A
B
C
D
E
F
G
H
I
J
K
L
4 Leaf Barndoor
Barndoor Slot
Barndoor Fix Ball
Air Vents
Yoke Knob
Yoke
Light Stand Adapter
Cold Shoe Mount w/ Stud
Light Intensity Knob
CCT Tuning Knob
On/ Off Button
DC Power Input Jack

65
4
Set Up And
Basic Operation
1
2
3
4
5
6
7
Mount Light Stand Adapter (G) to 5/8 Stud on Light
stand or use Cold Shoe Mount (H) to attach to camera.
Insert the AC/DC Power Adapter into the Power
Input Jack (L).
Press the On/Off Button (K) to power on the P180E.
Adjust the color temperature with the CCT Tuning
Knob (J).
Adjust the brightness with the Light Intensity Knob (I).
Loosen the Yoke Knob (E) to install optional Rain
Guard or Umbrella Holder.
Slide the Barndoor (A) into the Barndoor Slot (B)
until it clicks into place.
1
2
54
6
7
3

7
D-tap Cable
See website for additional accessories. www.fiilex.com
Dome Diffuser Rain Guard
Optional Accessories
Fresnel Lens

8
Specifications
Size (without Barndoor)
2.9” x 2.9” x 3.8” / 74.2 x 74.2 x 98mm
Weight (Includes Yoke)
1.2 lb/527g
LED
Dense Matrix LED
Thermal Design
Advanced Vapor Cooling System
CCT Range
3000-5600K Continuous Tuning
CRI
≥92
Power Consumption
40W Max / Comparable in output to 200W Tungsten
Power Input
12 to 24V DC
AC Adapter
100-240VAC,50-60Hz (In) / 19V DC, 65W Max (Out)
Operating Temperature
- 30 to 40 °C
Weather Resistance
IP-24 Rating
Optional Accessories

9
Information and Specifications in this document are subject to change without notice. DiCon
Lighting, Inc. assumes no responsibility or liability for any error or inaccuracies that may
appear in this manual. Unlawful reproduction or distribution in any manner without the
written permission of DiCon Lighting, is strictly prohibited.
© DiCon Lighting 1996-2014 All Rights Reserved
Fiilex.com
1689 Regatta Blvd. Richmond, CA 94804
[phone] . [e-mail]
For Your Safety
•Do not attempt to disassemble the body of the P180E.
•Do not directly cover the side and/or back air vents.
Allow for proper air flow.
•Use only included power supply or optional D-Tap Cable.
Failure to do so may cause damage to the LED light.
•Use only a soft, dry towel to gently clean the exterior of
light when needed.
•Before powering up for the first time, please remove any
or all protective membranes from the light.
Size (without Barndoor)
2.9” x 2.9” x 3.8” / 74.2 x 74.2 x 98mm
Weight (Includes Yoke)
1.2 lb/527g
LED
Dense Matrix LED
Thermal Design
Advanced Vapor Cooling System
CCT Range
3000-5600K Continuous Tuning
CRI
≥92
Power Consumption
40W Max / Comparable in output to 200W Tungsten
Power Input
12 to 24V DC
AC Adapter
100-240VAC,50-60Hz (In) / 19V DC, 65W Max (Out)
Operating Temperature
- 30 to 40 °C
Weather Resistance
IP-24 Rating