Fisher & Paykel CG363MLNGB1 Parts list manual

1.888.96.7872
Product dimensions and specifications are listed as a guide only. For complete installation instructions and specifications, refer to the product Use & Care Guide/Installation Instructions available at www.fisherpaykel.com
DIMENSIONS INCHES (MM)
CG363MLNGB1 CG363MLDNGB1
A Overall width of cooktop 5½” (900) 5½” (900)
B Overall depth of cooktop 16⅛” (410) 20⅞” (50)
C Height of chassis (below top of counter) ½” (89) ½” (89)
D Width of chassis ⁄” (856) ⁄” (856)
E Depth of chassis 15⅛” (84) 18⅞” (480)
F Overall height of product (including retracted dials/pan supports) ¾” (96) ¾” (96)
COOKSURFACE DIMENSIONS
CG363MLDNGB1, CG363MLNGB1
A
B
C
D
EF

1.888.96.7872
Product dimensions and specifications are listed as a guide only. For complete installation instructions and specifications, refer to the product Use & Care Guide/Installation Instructions available at www.fisherpaykel.com
DIMENSIONS INCHES (MM)
CG363MLNGB1 CG363MLDNGB1
A Overall depth of cutout 15⅜” (90) 19⁄”(494)
B Corner radius of cutout max.⅜” (10) max.⅜” (10)
C Overall width of cutout 4⁄” (865) 4⁄” (865)
D Min. clearance from left edge of product to nearest vertical surface 2⅜” (60) 2⅜” (60)
E Min. vertical distance between counter and cabinet extending above the counter 18” (457) 18” (457)
F Min. distance between overhead cabinets installed to either side of product 6” (915) 6” (915)
G Min. distance from front edge of counter to front edge of product 1¼”(2) 1¼”(2)
H Minimum clearance from rear edge of product to:
nearest combustible surface
nearest non-combustible surface
1¼” (2) ½” (1)
less than 1¼” (2) less than ½” (1)
I Minimum clearance from the glass surface to combustible surface centred
above the cooking surface. 0” (762) 0” (762)
J Min. clearance below top of countertop to:
nearest combustible surface
Fisher & Paykel oven or nearest non-combustible surface
4½” (115) 4½” (115)
4” (100) 4” (100)
K Minimum clearance from right edge of product to nearest vertical surface ⅛” (80) ⅛” (80)
L Distance from top of counter to center of gas inlet on product 2½ ” (64) 2½ ” (64)
M Distance from edge of chassis to gas inlet on product
(* CG6ML models only: If countertop thickness exceeds 2” (50 mm), additional cutout space will be required
to accomodate the fi tted elbow).
¾” (20) ¾” (20)
Note: Ensure there is a grounded power outlet within 5½” (900 mm) of the center rear of the product. A suitable flexible hose must be used between
the product gas inlet and the connector on the wall. The connector should be 25½”-29½” (650 - 750mm) above the floor and towards the left-hand
end of the product. It should be accessible with the product installed.
COOKSURFACE CABINET DIMENSIONS
CG363MLDNGB1, CG363MLNGB1
Clearance and cabinetry dimensions
H
I
K
M
D
J
G
E
F
A
C
B
Cutout dimensions
Cutout measuring 2” x 20” (50 x 500mm)
for air intake grill. Ensure air can easily
enter the area around the base of the
product from the room in which the
product is installed.
L
M