Fisher-Price J9000 User manual

J9000
Please keep this instruction sheet for future reference,
as it contains important information.
Adult assembly is required.
Tool needed for assembly: Phillips screwdriver (not included).
Requires three, “AA” (LR6) alkaline batteries
for operation (not included).
www.fisher-price.com

2 Posts
Bottom View
Post
Post
Pegs
Pegs
• Position the house so the bottom is facing you.
• Align the holes in a post with the matching pegs
on the bottom of the house as shown.
• Insert two screws through the post and into the
pegs. Tighten the screws with a Phillips screw-
driver. Do not over-tighten.
• Repeat this procedure to attach the other post.
• Set the house upright.
Parts
2
This product contains small parts in
its unassembled state. Adult assembly
is required.
CAUTION
Parts Not Shown:
3 Figures
Table
2 Chairs
Stroller
Play Center
Bed
Label Sheet
#6 x ½" (1.3 cm) Screw - 4
Shown Actual Size
2 Fences
House
Assembly
Fastener
• Fasteners have been added to secure the figures
to the package. The fasteners are not a toy. Wiggle
and pull the fasteners to remove them. Throw
them away immediately.

3
Proper label application will help to keep the labels looking their best!
• Make sure the areas where the labels will be applied are clean and dry. Wipe this product with a clean,
soft, dry cloth to remove any dust or oils.
• For best results, do not attempt to apply a label more than once.
• Apply the labels as shown in the illustration above.
Let's Decorate the House!
7 10 18 4
22 811
12
9
2
13
19
2525
17
20
1
23
24 3
21
14
6
15
5

Battery Installation Battery Safety Information
4
Hint: We recommend using alkaline batteries for
longer battery life.
• Locate the battery compartment on the bottom of
the toy.
• Loosen the screw in the battery compartment
door with a Phillips screwdriver. Remove the
battery compartment door.
• Insert three, new “AA” (LR6) alkaline batteries, as
indicated inside the battery compartment.
• Replace the battery compartment door and
tighten the screw with a Phillips screwdriver. Do
not over-tighten.
• When sounds from this toy become faint or stop, it’s
time for an adult to change the batteries!
• Protect the environment by not disposing
of this product with household waste
(2002/96/EC). C heck your local authority for
recycling advice and facilities (Europe only).
SHOWN ACTUAL SIZE
1.5V x 3
"AA" (LR6)
In exceptional circumstances, batteries may leak
fluids that can cause a chemical burn injury or ruin
your product. To avoid battery leakage:
• Do not mix old and new batteries or batteries of
different types: alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the battery
compartment.
• Remove batteries during long periods of non-use.
Always remove exhausted batteries from the
product. Dispose of batteries safely. Do not dispose
of this product in a fire. The batteries inside may
explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type,
as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the product
before charging.
• If removable, rechargeable batteries are used, they
are only to be charged under adult supervision.

5
Fun Sounds Around the House!
• Locate the power switch on the bottom of the toy.
• Slide the switch to •on or o
off.
Hint: If your child is not actively playing with this toy, it turns off automatically
(sleep mode).
Press to hear fun sound effects!
Power Switch
Press
Press
Press
Press
Press
Press

Clamp
• Push the post on the end of a fence onto the
clamp on the base of the toy to "snap" the two
parts together.
Fence
Post
• Push the clamp on one end of a fence onto the
post on the base of the toy to "snap" the two
parts together.
Fence Post
Clamp
Consumer Information
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
© 2006 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
PRINTED IN MEXICO J9000pr-0920
Care
• Wipe the toy and figures with a clean cloth
dampened with a mild soap and water solution.
• This toy has no consumer serviceable parts. Do
not take this toy apart.
• Do not immerse the toy.
Attaching the Fences
For countries outside the United States:
CANADA: Questions? 1-800-432-5437. Mattel Canada Inc.,
6155 Freemont Blvd., Mississauga, Ontario L5R 3W2;
www.service.mattel.com
GREAT BRITAIN: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303;
www.service.mattel.com/uk
AUSTRALIA: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
Consumer Advisory Service 1300 135 312.
NEW ZEALAND: 16-18 William Pickering Drive,
Albany 1331, Auckland.
ASIA: Mattel East Asia Ltd, Room 1106, South Tower,
World Finance Centre, Harbour City, Tsimshatsui, HK, China.
United States Only
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance
with the instructions, may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can
be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Consult the dealer or an experienced radio/TV
technician for help.
Note: Changes or modifications not expressly
approved by the manufacturer responsible for
compliance could void the user’s authority to operate
the equipment.
FCC Statement