Fisher-Price Imaginext H5341 User manual

www.fisher-price.com
Model
H5341

2
Older children and experienced Imaginext™ System users
The more your child plays with this toy, and development and skill increases, the less
assistance your child needs! Experienced Imaginext™users will enjoy using all parts of
this toy to build their own structures or try building an alternate assembly shown below.
Welcome to the Imaginext™System
Younger children
& those new to
the Imaginext™
System
Use our step-by-step
instructions to build
the structure shown
on the cover of this
booklet. Encourage
your child to assist
you with some of the
simple steps. This
assembly is ideal for
active play and it can
be used as a playset
rather than a
building toy.
The colors and decorations of the product may sometimes vary from these instructions.

3
One-Time Assembly
• Fit the pegs in the upper skull into
the matching holes in the frame.
• Insert four, screws into the back of
the frame and tighten them to
secure the upper skull. Do not
over-tighten.
• Repeat this procedure to attach the
lower skull.
#4 x 3/8" Screw - 8
Shown Actual Size Frame
Lower Skull
Upper Skull
This toy contains small parts in its unassembled state.
Adult assembly is required.
CAUTION

Battery Installation
4
• Locate the battery compartment on
the upper skull.
• Loosen the screw in the battery
compartment door with a Phillips
screwdriver. Remove the battery
compartment door.
• Insert three, "AAA" (LR03) alkaline
batteries, as indicated inside the
battery compartment.
Hint: We recommend using alkaline
batteries for longer battery life.
• Replace the battery compartment door
and tighten the screw with a Phillips
screwdriver. Do not over-tighten.
• When sounds or lights from this toy
become faint or stop, it’s time for an
adult to change the batteries!
Battery
Compartment
Door
Battery Safety Information
Batteries may leak fluids that can cause
a chemical burn injury or ruin your toy.
To avoid battery leakage:
• Do not mix old and new batteries or
batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable
(nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods
of non-use. Always remove exhausted
batteries from the toy. Dispose of
batteries safely. Do not dispose of
batteries in a fire. The batteries may
explode or leak.
• Never short circuit the battery
terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-rechargeable
batteries.
• Remove rechargeable batteries from
the toy before charging.
• If removable, rechargeable batteries
are used, they are only to be charged
under adult supervision.
1.5V x 3
“AAA” (LR03)
Shown Actual Size
BOTTOM VIEW

1.
5
2.
Let’s Build It!
4.
3.

8.
Let’s Build It!
7.
6
6.5.

9.
7
10.
Let’s Build It!
12.
11.

8
16.
Let’s Build It!
14.13.
15.

Let’s Build It!
9
18.17.
20.19.

21.
10
Let’s Build It!
• Locate the On/Off switch on the underside of the
upper skull.
• Slide the switch to the position to turn the toy on
and to the position to turn it off.
Hint: If your child is not actively playing with this toy,
it turns off automatically (sleep mode).
• When your child is finished playing with this toy,
slide the on/off switch to the off position.