Fisher-Price N1880 User manual

www.fisher-price.com
N1880
Please keep this instruction sheet for future
reference, as it contains important information.
Requires two “AAA” batteries (included).
Adult assembly is required for battery replacement.
Tool required for battery replacement: Phillips
screwdriver (not included).

For best performance, we recommend
replacing the batteries that came with
this toy with two, new alkaline “AAA”
(LR03) batteries.
• Locate the battery compartment on the
bottom of the toy.
• Loosen the screws in the battery com-
partment door. Remove the battery
compartment door.
• Remove the exhausted batteries and
throw them away.
• Insert two "AAA" (LR03) alkaline batteries.
Hint: We recommend using alkaline
batteries for longer battery life.
• Replace the battery compartment door
and tighten the screws.
• If the toy begins to operate erratically, you
may need to reset the electronics. Slide
the power switch off and then back on.
• When sounds from this toy become faint
or stop, it’s time for an adult to change
the batteries.
In exceptional circumstances, batteries may
leak fluids that can cause a chemical burn
injury or ruin your product. To avoid
battery leakage:
• Do not mix old and new batteries or
batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable
(nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods
of non-use. Always remove exhausted
batteries from the product. Dispose of
batteries safely. Do not dispose of this
product in a fire. The batteries inside may
explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the
product before charging.
• If removable, rechargeable batteries are
used, they are only to be charged under
adult supervision.
Battery
Replacement
• Protect the environment by not
disposing of this product with
household waste (2002/96/EC).
Check your local authority for
recycling advice and facilities
(Europe only).
Battery Safety
Information
1.5V x 2
“AAA” (LR03)

Silly Sounds and Swirling Action!
• Slide the power switch on .
• Hear fun sound effects and music when you lift the pelican’s beak.
• Pull the pelican for musical tunes and silly sounds.
• Put the colorful balls in his mouth for swirling, popping action as he waddles along!

Care
• Wipe this toy with a clean cloth dampened
with a mild soap and water solution.
Do not immerse this toy.
• This toy has no consumer serviceable
parts. Do not take this toy apart.
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A. N1880pr-0920
© 2008 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. PRINTED IN CHINA
FCC Statement (United States Only)
This equipment has been tested and found
to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there
is no guarantee that interference will not
occur in a particular installation. If this
equipment does cause harmful interference
to radio or television reception, which can
be determined by turning the equipment
off and on, the user is encouraged to try to
correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Consult the dealer or an experienced radio/
TV technician for help.
Note: Changes or modifications not
expressly approved by the manufacturer
responsible for compliance could void the
user's authority to operate the equipment.
This device complies with Part 15 of the
FCC Rules.
Operation is subject to the following two
conditions: (1) this device may not cause
harmful interference and (2) this device
must accept any interference received,
including interference that may cause
undesired operation.
Consumer Information